Start with the equipment family, narrow into the right subtype, and compare available inventory using search terms, manufacturers, materials, and technical filters.
Choose whether you want to browse equipment, complete systems, or entire plants before narrowing the results.
Move between closely related subtypes without leaving the current equipment family.
These filters are based on the selected equipment category and subtype, so you can narrow the listings using the attributes that matter for this type of asset.
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
These options come from the current listings and highlight the manufacturers, materials, and other attributes most common in this equipment set.
Showing 25 of 37 matching Centrifugal.
Wet Gas Compressor Radial Split case two stage compressor motor through a Lufin gear reducer
The Datum compressor is an 18 frame size(inside case diameter) with a radial split case, six impellers and a back to back rotor design. The machine features a lube skid that supports the compressor, motor and gear, a gas skid for the double Dry Gas seals, and instrumentation for vibration and temperature detection.
MMSCFD Dry: 49.73; Lbs/Hr Wet: 224,820;
Inlet PSIA: 20.9; Inlet Temp: 106 Degree F; Inlet ACFM Wet: 24,183
Designed for Outdoor Use, Under roof.
All Electricals are Class 1, Group CD, Division 2.
Speeds: Maximum Continuous 5,653 RPM,
Trip Speed 5,719,
CCW rotation from drive end. With one piece shaft.
Motor, Gear reducer, and Compressor skid mounted.
Lufkin Gear reducer, 3.178:1 ratio, rated 10,300 HP.
The Oil control system is by Cobey, and skid mounted.
The Seal gas system and skid are by Flowserve.
Air end compressor head Part # 1616 6551 GA55 GBD- part # 2901-0844-00.
Centrifugal compressor with eight impellers Inlet pressure 358 psia, inlet temperature 50 degrees F. This compressor has an average compressibility factor of 1.013 Cooling water temperature is 85 degrees F, and after intercooling is 100 degrees the first critical speed is 5,400 rpm. The compressor rpm is 10,440, with a bhp of 8228 Up connected intake and discharge flanges, the suction is 10" and the discharge is 8" . The case design pressure is 1000 psi for the inlet and discharge. This compressor has a common lube system with other pieces in the train and two ring oil seals. Originally driven by a steam turbine (not included).
4284 ACFM Rated for 9185 hp Pressure Suction 140 Nozzle orientation up. Rpm 10483 Driven by a steam turbine (IPP# 212817) and speed increaser (IPP # 212818). Molecular weight, 17.03 5 Stages, 10,438 rpm speed. 6650 critical speed. MAWP rated for 450 psi at 385 degrees F.
Centac II air compressor Water cooled with both Intercooler & after cooler Compressor inlet 6" discharge 3" cooling water inlets and outlests are 2" Skid mounted with control panel and oil pump 2 pole 3 phase constant speed AC drive motor rated for 129 full load amps With carbon steel air reciever 600 gallon vertical mount 6" inlets and outlets, 1.5" presure releif valve, and 15" eliptical hand way.
Turbine and Compressor package Turbine Model CYRPE Serial number 202213 Compressed air discharge pressure is 60 to 65 psi Turbine steam pressure discharge 106 to 125 psi. Packaged design with inter and after cooler, and lube oil package. Digital controls and digital governor. Includes motor starter and switch gear.
Centac Air Compressor
11,754 'TDH Sundyne centrifugal compressor Direct driven through a Sundyne gearbox by a Louis Alis Pacemaker AC motor
centrifugal propylene refrigeration compressor. 1st section: inlet conditions, capacity 344,787 lbs/hr, pressure 21.8 psia, temp -35 deg F, compressability .949, flow rate at suction cond 27036 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 41.9 psia, 25.8 deg F temp, compressability 0.934. Section 2: inlet conditions, capacity 547505 lbs/hr, pressure 41.9 psia, temp 15.2 deg F, compressability 0.932, flow rate at suction condition 24603 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 127.8 psia, temp 119.9 deg F, compressability .895. Section 3: inlet conditions, capacity 53660 lbs/hr, pressure 127.8 psia, temp 119.9 deg F, compressability 0.895, flow rate at suction condition 8474 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 257.7 psia, temp 187.4 deg F, compressability 0.841. Rpm 5376, duty BHP 13809, driver BHP 13678, design pressure 300 psig, design temp 350 deg F. (Compressor only). Rebuilt 1993.
centrifugal gas compressor. Weight flow 348,900 Kg/hr. Required power 865 KW All parts and accessories available including lube oil skid, Seal oil overhead tank, DeGassing tank, seal oil collecting tank, heat exchanger and Arlon filters.
Centac Air Compressor Direct coupled to motor Intake pressure;14.5 Intake temp. 95 degrees F at 60% relative humidity rated speed 1800 rpm, barometer 14.4 psia.
Centac Air Compressor at 60% relative humidity rated speed 1800 rpm barometer 14.4 psia
with Turbodyne steam turbine driver Maximum pressure 1000 PSI @ 145 degrees F Maximum continuous RPM is 6070 Rated 4852 HP, 5780 RPM Previously used as a Methanol Recycle compressor The compressor is driven by a Turbodyne steam turbine Motor: Order #U-19182 Inlet 600 PSIG @ 750 Degrees F; Exhaust pressure 55 PSIG @ 373 degrees F. Maximum continuous speed 5650 RPM. Frame S5, 2nd critical rpm 11,500. Includes a spare rotor. (NOTE: Turbine can be sold separately -See IPP # 222928 for turbine only).
centrifugal cracked gas hydrocarbon 2 section compressor 1st section: inlet conditions, capacity 193,400 lbs/hr, pressure 15.7 psia, CP/CV 1.178, temp 99 deg F, compressability .9945, flow rate at suction condition 42400 cu ft/min, molecular weight 28.88 Discharge conditions, pressure 42.5 psia, 220 deg F temp, compressability .9926, compression ratio 2.675. Section 2: inlet conditions, capacity 176,300 lbs/hr, CP/CV 1.183, pressure 36.3, temp 95 deg F, compressability 0.9885, flow rate at suction condition 17460 cu ft/min, molecular weight 27.73. Discharge conditions, pressure 95 psig, temp 212 deg F. Speed 4230, duty BHP 8110, driver BHP 9130, design pressure 125 psig, design temp 350 deg F. (Compressor only).
high pressure, unitized and skid mountedmultistage air compressor systemoil free designhigh air temperature to trip setting (interstage) 46 degrees Cdesign cooling water temperature 25 degrees Ccooling water temperature rise design 14 degrees Ccooling water flow to oil cooler 180 ltr/min
high pressure, unitized and skid mountedmultistage air compressor systemoil free designdesign cooling water temperature 25 degrees Ccooling water temperature rise design 14 degrees Ccooling water flow to oil cooler 180 ltr/min
Ingersol Rand Centac Air compressor Centrifugal compressor 3/60/230/480 volt Serial # 157414 With R P Adams air cooler, 10" diameter x 12' long, 66 sq.ft surface area
centrifugal cracked gas hydrocarbon 2-section compressor 1st section: inlet conditions, capacity 181,224 lbs/hr, pressure 102 psia, temp 95 deg F, compressability .968, flow rate at suction condition 6618 cfm, molecular weight 25.79. Discharge conditions, pressure 231.8 psia, 199 deg F temp, compressability .962. Section 2: inlet conditions, capacity 188118 lbs/hr, pressure 205 psia, temp 93 deg F, compressability .938, flow rate at suction condition 3378 cu ft/min, molecular weight 25.33. Discharge conditions, pressure 524 psia, temp 226 deg F, compressability .932. Speed 9819, duty BHP 7590, driver BHP 8360, design pressure 650 psig, design temp 350 deg F. (Compressor only).
centrifugal ethylene refrigeration compressor inlet conditions, capacity 28930 lbs/hr molecular weight 28.02 Discharge conditions, pressure 81.3 psia, 65 deg F temp, compression ration 5.18. Section 2: inlet conditions capacity 80480 lbs/hr, pressure 81.3 psia, temp -28.4 deg F; discharge condition pressure 305 psig, temp 149 deg F, compression ration 3.75. Speed 10,780 rpm. Driver BHP 3272, duty BHP 2719, design pressure 400 psig, design temp 350 deg F. (Compressor only). Rebuilt 1993.
centrifugal propylene refrigeration compressor inlet conditions, capacity 344,787 lbs/hr compressability .949 molecular weight 42.18 Discharge conditions, pressure 41.9 psia, 25.8 deg F temp, compressability 0.934. Section 2: inlet conditions, capacity 547505 lbs/hr, pressure 41.9 psia, temp 15.2 deg F, compressability 0.932, flow rate at suction condition 24603 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 127.8 psia, temp 119.9 deg F, compressability .895. Section 3: inlet conditions, capacity 53660 lbs/hr, pressure 127.8 psia, temp 119.9 deg F, compressability 0.895, flow rate at suction condition 8474 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 257.7 psia, temp 187.4 deg F, compressability 0.841. Rpm 5376, duty BHP 13809, driver BHP 13678, design pressure 300 psig, design temp 350 deg F. (Compressor only). Rebuilt 1993.
centrifugal cracked gas hydrocarbon 2-section compressor. 1st section: inlet conditions, capacity 193,400 lbs/hr, CP/CV 1.178, compressability .9945, flow rate at suction condition 42400 cu ft/min, molecular weight 28.88. Discharge conditions, pressure 42.5 psia, 220 deg F temp, compressability .9926, compression ratio 2.675. Section 2: inlet conditions, capacity 176,300 lbs/hr, CP/CV 1.183, pressure 36.3, temp 95 deg F, compressability 0.9885, flow rate at suction condition 17460 cu ft/min, molecular weight 27.73. Discharge conditions, pressure 95 psig, temp 212 deg F. Speed 4230, duty BHP 8110, driver BHP 9130, design pressure 125 psig, design temp 350 deg F. (Compressor only).
Elliot Centrifugal Compressor Style 2 B1 Frame
When your operation depends on reliable gas compression for process, storage, or transfer, industrial compressors deliver the performance needed to keep operations moving. With over 47 years of process equipment expertise, IPP provides immediate access to high-quality used compressors sourced from 20 complete plant sites and included in our inventory of over 15,000 ready-to-ship pieces of equipment. Choosing used compressors from IPP helps companies reduce capital costs, shorten procurement timelines, and maintain consistent system reliability.
Industrial compressors are designed to increase the pressure of gases for transportation, storage, or process operations. They are essential for applications across chemical manufacturing, energy production, food and beverage processing, and general industrial services.
Compressors are designed for durability, chemical compatibility, and safe operation under pressure:
Learn more about industrial compressor selection and optimization from Plant Engineering.
Search the IPP inventory or contact IPP’s equipment experts to find a used compressor that fits your plant’s needs. With ready-to-ship inventory, IPP helps companies increase uptime, lower costs, and maintain reliable gas handling operations.
