Wyssmont Dryers - Used and Surplus Inventory | IPP

Additional Information: Jacketed Vacuum plate dryer, Order # 365306/2. jacket 4 bar @ 100 degrees C (21 liter), jacket test pressure 6.5 bar, 316L stainless steel (1.4435) jacket, Approximately 2.4m diameter x 1.4m straight side, weld dished top, bolt bottom. with (4x) 2000mm 316L stainless steel (1.4571) jacketed trays, approximately 2m diameter x 25mm deep with scrappers and (4x) smaller diameter plates with scrappers. internal shaft belt driven by 0.75 kw, 3/50/415 volt, 700 rpm Exd 11 BT5 motor via Lenze vari-speed gearbox, type 11-60-107-259, 1160-1600/10.5-171 rpm. Top head feed openings has a (1) Krauss Maffei 316L stainless steel (1.4435/1.4571) rotary vacuum seal, type VS20, working temperature 100 degrees C, direct driven by 2.8 kw, 3/50/415 volt, 280-1430 rpm Exd-11B-T4 motor. the discharge on the bottom head has (1) Krauss Maffei 316L stainless steel (1.4435/1.4571) rotary vacuum seal, type VS10, working temperature 100 degrees C, direct driven by 2.1 kw, 3/50/415 volt, 280-1430 rpm Exd motor. Controls available for both seals. Dryer includes (2) Nash stainless steel vacuum pumps, size SC-5-SS, driven by 30 kw, 3/50/415 volt, 1460/1470 rpm Exd-11B-T4 motor. top head and straight side have insulation and cladding.

More Details ⟶

Stock Number: #703106

63,500 mm (2,500 in) Stainless Steel 316L Dryer-Wyssmont

Diameter: 2,500 in

Number of Trays: 11

Shelves MOC: Stainless Steel 316

Temperature: 95 °C

Additional Information: 316L stainless steel (1.4571/1.4435) continuous vacuum plate dryer, 27.5 square meter heat surface area, manufactured by Krauss Maffei, fabrik #3608, KM order #365297/2/001, vessel 20 mbar @ 95 degrees C (11820 liter), (6) 1750mm diameter & (5) 1930mm diameter 316Ti stainless steel (1.4571) steam heated plates, each plate fitted with a scraper , plates 6 & 8 fitted with a crushing roller, vessel 2.5m diameter x 1881mm straight side, bolt dished top, bolt truncated flat bottom, under driven by 1.1kw, 3/50/415 volt, 700 rpm Exd 11B T5 motor via a vari-speed Lenza gearbox, 1160/1600-10.5/1.71 rpm, 1:6 ratio, packed gland on shaft, Openings: top : 1-500mm manway, 1-400mm (vacuum), 1-150mm (product inlet), 2-50mm (standby’s), straight side: 4-500mm manways, 1-125mm (heating inlet plate 3 & 4), 1-65mm (heating inlet plate 1 & 2), 2-50mm (standby & vacuum gauge), 1-40mm (heating inlet plate 11), bottom side: 2-175mm (hand holes), 1-100mm (level feeler), 2-65mm (heating outlet plate 1,2,3 & 10), 1-40mm (heating outlet plate 11), bottom: 1-200mm (product outlet with blind cover), 1-150mm (product outlet, Product inlet and outlet with a stainless steel rotary lock valve, driven by 2.2kw, 3/50/415 volt, 2850 rpm Exd 11B T5 motor via a vari-speed gearbox, 2800/0 to 1058 rpm, steam heated shaft with rotary union joint process data 55kg/hour of final product, initial moisture 65% rel. to 35% purity, residual moisture 35% rel. to 65% purity, density (moist) 392-471 kg/m3, density (dry) 245-318 kg/m3, drying temperature 65 degrees C, drying time 45-65 minutes, pressure in dryer 10 bar, mass flow of wet material 55 x 0.65 : 0.35 = 102 kg/hour, volume of wet material 102 : (0.392...0.471) = 260 – 217 liter/hour

More Details ⟶

Stock Number: #246422

Stainless Steel 316L Krauss Maffei GTT 27/11 plate Dryer-Wyssmont

Diameter: 133.9 in

Height: 153.5 in

Tray Diameter: 106.3 in

Number of Trays: 11

Shelves MOC: Stainless Steel 316L

Temperature: 260.6 °F

Orientation: Vertical

Additional Information: 22000 liter internal capacity, chamber pressure 1,04 bar (abs) @ 110 degrees C, 44.5/48.3 liter plates, pressure 2.5 bar (abs) @ 127 degrees C, gas tight design, 55 square meter plate surface area, internal chamber 3.4m wide x 3.9m deep, steam heated plates, gas tight inspection doors,

More Details ⟶

Stock Number: #89427

1,950 mm (76 in) Stainless Steel Other Dryer-Wyssmont

Diameter: 76 in

Height: 120 in

Tray Diameter: 60 in

Number of Trays: 16

Shelves MOC: Stainless Steel Other

Orientation: Vertical

Additional Information: 40.3 sq meter turbo dryer CS dryer housing 6'4" dia x 10' hig Trays are under driven, with a gear drive, requires a 2HP motor( none with unit)

More Details ⟶

Stock Number: #89433

2,150 mm (83.9 in) Stainless Steel 304 Dryer-Wyssmont

Diameter: 2,150 mm

Tray Diameter: 1,950 mm

Number of Trays: 29

Temperature: 200 °C

Tray Dryer Type: Semi Continuous

Orientation: Vertical

Additional Information: plate dryer system plate area 73.1 square meter (29) 1750/1930mm diameter 304 stainless steel plates Drying chamber 2130mm x 3135mm x 4812mm high (3) air heaters, manufactured by GEA

More Details ⟶

Stock Number: #704709

1,950 mm (75.8 in) Stainless Steel 316 Dryer-Wyssmont

Diameter: 1,950 mm

Height: 1,400 mm

Number of Trays: 8

Shelves MOC: Stainless Steel 316

Temperature: 105 °C

Additional Information: 20.2 square meter, plate dryer/cooler, Drying surface: 188 sq ft (17.5 sq meter); cooling surface: 29 sq ft (2.7 sq meter). Initial moisture: 40%, residual moisture: 0.5%; drying temp: 100-105 degrees C, drying time 38.5 minutes; cooling temperature: 35 degrees C, cooling time: 5.5 mins. (8) plates cored for steam heating, 1763mm/1926mm diameter. (2) raker agitators on each plate, (2) heater banks. Max working pressure: 11 bar. Unit direct driven by Lonze varispeed gearbox, belt driven by 1.5 KW, 3/50/415 volt, 1440 rpm flameproof motor. Chamber size: 2038mm diameter x 1424mm high. All wetted parts are 316 stainless steel. (2) 1345mm high x 888mm wide inspection doors with (2) 300mm x 228mm sight glasses on each door. Openings: 1-200mm discharge, 16-37mm plate inlets/outlets, 4-25mm on heater banks, 1-228mm dust outlet, 1-300mm feed.

More Details ⟶

Stock Number: #39544

Stainless Steel 316 Krauss Maffei TTB27/35 Dryer-Wyssmont

Diameter: 171 in

Height: 8,800 mm

Tray Diameter: 108 in

Number of Trays: 33

Temperature: 110 °C

Additional Information: 175 square meter (1,883 square feet), plate dryer. 316 stainless steel lined jacket housing, Heating coil 4 bar (58 psi), 6 bar test pressure. 11KW (15 HP) drive motor with reduction gearbox. Outside diameter is 4350mm (14'3" ).

More Details ⟶

Request a Quote

Shop used, surplus and secondhand Wyssmont Turbo-Dryers from IPP – in stock and trusted for precise, uniform drying

IPP helps you save time and money with ready-to-ship Wyssmont dryers for chemicals, food ingredients and industrial minerals

Wyssmont dryers, also known as Wyssmont Turbo-Dryers, are vertical tray dryers designed for continuous drying of difficult-to-handle materials. These systems use a series of slowly rotating trays within a stationary vertical housing, with heated air or inert gas passing through for efficient and uniform drying. With more than 47 years of expertise, IPP supplies used and surplus Wyssmont dryers sourced from 20 complete plant sites and backed by a vast inventory of over 15,000 process systems.

Wyssmont dryers are known for their ability to process sticky, heat-sensitive or abrasive products that would clog or degrade in other types of dryers. Their enclosed design also minimizes product loss and exposure to oxygen or contaminants.

Primary uses across industries

In chemical manufacturing, for drying catalysts, resins, pigments and specialty powders
In food processing, for drying spices, proteins, flavorings and extracts
In pharmaceuticals and nutraceuticals, for intermediates, botanicals and bulk powders
In mining and minerals, for drying clays, salts and other abrasives

Types of materials processed

Sticky, thermally unstable or oxygen-sensitive solids
Slurries and pastes that require pre-drying and phase conversion
Fine powders, agglomerates and materials prone to fouling in traditional dryers

Common materials of construction

Built for durability and clean processing, Wyssmont dryers are typically constructed from:

Stainless steel for sanitary and corrosion-resistant applications
Carbon steel for general-purpose chemical and mineral drying
Special alloys for highly corrosive or reactive environments

Key features of Wyssmont dryers

Vertical tray design for gentle drying and easy product discharge
Continuous operation with consistent drying temperature across trays
Can operate under inert gas for solvent recovery or oxygen-sensitive materials
Low-maintenance, enclosed system for dust control and clean operation
Designed for thermal efficiency and precise moisture control

Learn more about Turbo-Dryer technology from Chemical Engineering.

Find your Wyssmont dryer at IPP

Search the IPP inventory or contact IPP’s expert team to secure a used, secondhand or surplus Wyssmont dryer that matches your process. With trusted equipment in stock, IPP helps you save time and money across all stages of production.

FAQ

Dryer-Wyssmont FAQ

Have questions about Wyssmont Dryers or our services? Learn more about our products and why customers choose IPP.

What makes Wyssmont dryers different from other tray dryers?

The vertical rotating tray design provides consistent drying and easy material handling, even for sticky or abrasive products.

Which industries benefit most from Wyssmont dryers?

Chemical, pharmaceutical, mineral and food producers use them for materials that would clog or degrade in conventional dryers.

What’s involved in maintaining a Wyssmont dryer?

Routine checks include inspecting the rotating trays, drive system, seals, and airflow for consistent performance and minimal downtime.

What are the benefits of buying used or secondhand process equipment from IPP?

IPP offers rapid delivery, lower costs and more than 47 years of global experience with process equipment for every industry.

Wyssmont Dryers - Used and Surplus Inventory | IPP

Top Wyssmont Dryers in stock

Viewing Dryer-Wyssmont

Narrow these listings

Available Wyssmont Dryers

Shop used, surplus and secondhand Wyssmont Turbo-Dryers from IPP – in stock and trusted for precise, uniform drying

IPP helps you save time and money with ready-to-ship Wyssmont dryers for chemicals, food ingredients and industrial minerals

Primary uses across industries

Types of materials processed

Common materials of construction

Key features of Wyssmont dryers

Find your Wyssmont dryer at IPP

Dryer-Wyssmont FAQ