Quote
Quote Cart
clear all items
Equipment Search

New and Used Equipment

Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Hosokawa Alpine
Clear all filters
Refine Results

Narrow these listings

Results 3 items found

Available equipment

Showing 3 of 3 matching equipment.

Stock Number: #205616
Stainless Steel 304 Dryer-Flash
Air Flow: 4,800 CFM
Evaporation Rate: 770 lb/h
Diameter: 43.3 in
Pressure: 14.2 psi
Feeder: Yes
Product Feed Rate: 925 lb/h
Inlet Moisture %: 50
Outlet Moisture %: 4
Additional Information: original product (Artificial Sweetener) design rate Micron Pulverizer/Dryer Micron pulverizer/dryer/classifier is 304SS with (2) 32" x 24" access doors Pulverizing section, is driven by a 50 HP 3/60/460V motor,600 rpm 39.4" diameter Classifying section is driven by a 10HP 3/60/460V motor, 45 to 450 rpm rotor speed. With delumper, live bottom feed bin, Micron/Hosokawa pulverizer/dryer/classifier Original product designed 770 to 925 Lbs/Hr, of 50% solids feed, drying to an end product moisture content of 4%, 0.46 Specific Gravity, and particle size of 100 to 325 mesh Crystals are dropped into a 304SS Jacobson delumper, which discharges into 100 cu ft 304LSS live bottom bin, 60" diameter x 54"SS. 16.4 to 164 rpm with a 3" diameter screw. This feeds into the bottom of the Hosokawa Micron pulverizer/dryer/classifier, and remains in the dryer until the desired particle size is met. The product fineness is accomplished by changing rotor speed of the classifier and air flow. The hot air flows enter the bottom of the dryer with the product con-currently. The dried particles are discharged through a classifier at the top of the dryer Heater not included, but original design was: Inert heating gas inlet temperature is 300 degrees F(149 deg. C); Heating gas outlet temperature is 192 degrees F (90 deg C); Heating gas flow rate is 4,800 SCFM (21, 390 lbs.hr; Maximum Thermal Capacity is 60,700 to 81, 300 BTU/Min; Product outlet Temperature is 90 to 110 degrees F. Con-current air flow design Previous use: Artificial Sweetener No Heater and no controls
More Details ⟶
Stock Number: #247055
Stainless Steel Other Hosokawa Alpine Dryer-Nauta
Capacity Solids: 353 ft3
Capacity Liqid: 2,650 gallons
Agitator Seal Type: Mechanical
Additional Information: • Approx 10,000 liter stainless steel (highly polished) conical screw nauta mixer system, system consists of (1) 10,000 liter highly polished stainless steel conical nauta mixer, weld dished top, weld coned bottom, approx. 3m diameter x 5m cone section, orbital arm driven by 11kW, 3/50/415 volt, 1470 rpm EExd IIB T4 motor via a reduction gearbox, screw driven by 0.75kW, 3/50/415 volt, 1435 rpm EExd IIB T4 motor via a 12.98:1 ratio reduction gearbox, bottom segmented ball valve, (1) approx. 3000 liter stainless steel vertical feed hopper, weld coned top and bottom, approx. 2.1m diameter x 500mm straight side x 400mm high top cone section x 700mm high bottom cone section, mounted on lugs, (1) stainless steel type 'The Comil' model 196S conical screen mill, manufactured by Quadro Engineering Incorporated, serial #19S-0359, driven by 7.5kW, 3/50/415 volt, 1440 rpm IP55 motor
More Details ⟶
Stock Number: #210326
Carbon Steel Bag House Dust Collector
Diameter: 24 in
Flow Direction: Pulse jet
Pressure: 0.05 bar
Filtration Area: 8 m2
Additional Information: Rated -150/50 MBar. Filter area is 8 m2 with cone bottom. Bolted top manifold that is 16" straight side. with 1.5" diameter manifold feed line, (2) pulse jet feed lines. With CS fan. Rotary Airlock valve on bottom.
More Details ⟶
Request a Quote