New and Used Equipment

jacketed double arm mixer Shell rated atmospheric Front mixing blade 45/30 rpm, rear mixing blade 30/20 rpm x-proof motor and starter box.

Mogul line heavy duty design with double nobben blades for extra shearing actions, tangential shaft design, packing glands on shafts Front agitator rated 30 RPM, rear agitator rated 20 RPM Unit designed for tilt discharge 8" bottom disharge valves. With bombay door style cover. Trough has bolted sides Trough inside dimensions - 50" wide x 56" long x 36 1/2" deep Total capacity is 550 gallon Unit driven one side by, Allis-Chalmer Induction Motor Motor type: AZZT HP: 300/300, PRM: 1180/880 Amps: 376/386 Enclosed Gear Drive Serial number: A-104 Input: 1150/870, Output: 39.3/29.8 HP rating: 300

Double Arm Mixer Mogul line heavy duty design jacketed trough with vacuum hood, cored shafts with double nobben blades for extra shearing actions tangential shaft design packing glands on shafts Front agitator rated 30 RPM, rear agitator rated 20 RPM. Unit designed for tilt discharge. With top atmospheric cover. Cover has (1) 18" diameter hatch with cover, (1) approx 24" for vacuums. Trough has bolted sides. Trough inside dimensions - 50" wide x 56" long x 36 1/2" deep total capacity is 550 gallon Unit has single end drive, with a chain and sprocket drive Enclosed Gear Drive , serial # A-168 Input Rpm =1750, output rpm=30.36, Pace Maker AC Model 4-2756820 01, 300 HP, 460 va, 3 ph, 60 Hz. Rpm 1785, amps 357.

Mogul line heavy duty design jacketed trough double nobben blades for extra shearing actions tangential shaft design, packing glands on shafts. Front agitator rated 30 RPM, rear agitator rated 20 RPM Unit designed for tilt discharge With top atmospheric cover. Trough has bolted sides Trough inside dimensions - 50" wide x 56" long x 36 1/2" deep total capacity is 550 gallon Unit has single end drive, with a chain and sprocket drive Enclosed Gear Drive , serial # A-233 Input Rpm =1750, output rpm=30.36, ratio 57.65. Type CEA

• 1.7 cubic foot working capacity
• Mini-mixer dryer- Polished inside and out
• U-stamp 30" diameter Single screw design. Arm rotates 2-4 rpm, a 6" diameter screw rotates 60 to 120 rpm230/460 volts.
• Bottom with safety grid and manual butterfly valve. C
• omplete with starter box Unit enclosed in SS shroud

Mogul line heavy duty design jacketed trough cored shafts with Double nobben blades for extra shearing actions, tangential shaft design, packing glands on shafts. Front agitator rated 30 RPM, rear agitator rated 20 RPM Unit designed for tilt discharge With top atmospheric cover Cover has (2) 18" x 18" hatches Trough has bolted sides. Trough inside dimensions - 50" wide x 56" long x 36 1/2" deep. Unit has single end drive, with a chain and sprocket drive

304 SS Bar cover with hinged 304 SS lid

single screw Nauta mixer Mixing chamber 120" dia x 173" Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor Openings: 2-24", 2-8" Screw has bottom steady bearing rotation 1.437 rpm

single screw Nauta mixer Mixing chamber 120" dia x 173" cone Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor. Openings: 2-24", 2-8". Screw has bottom steady bearing. Shaft speed 59.87 rpm, rotation 1.437 rpm.

• U stamped Jacket area: 12 square foot.
• Dryer chamber 40" diameter x 42" cone.
• Screw drive is a 230/460V Pacemaker motor with UL label, 1750 RPM input speed, 190 RPM output speed.
• Bolted flat top.

single screw Nauta mixer. Mixing chamber 120" dia x 173" cone. Rotating arm driven by 2 HP, 3/60/230/460 volt, 1725 rpm motor. Openings: 2-24", 2-8". Screw has bottom steady bearing. Shaft speed 59.87 rpm, rotation 1.437 rpm.

Type 3530. Mixing chamber 11' diameter x 17' cone. 13" diameter screw, output speed 99 rpm. Orbital arm output speed 33 rpm. Orbital arm driven by 2 HP, 3/60/230/460 volt, 1750 rpm X-proof motor.

Series D, Int has polished finish. 52" x 61", overall 90" long. Hinged half cover. 10" btm discharge. 64 rpm screw speed, 2.2 rpm arm speed.

jacketed mixer Trough size 57" deep x 40" wide x 48" long. (2) Carbon steel "Z" blades. Packing glands on shafts. Openings: top 24" x 20" manway with hinged cover, 1-1/2"; jacket 10-2", 6-1", 1-1/2"; bottom discharge by 2-5" with butterfly valves.

jacketed mixer Trough size 42" deep x 38" wide x 46" long. carbon steel "Z" blades. Packing glands. Full insulation on trough. Openings: top 24" x 20" manway with hinged cover, 1-1/2"; jacket 8-1", 1-1/2"; bottom 2-4" with butterfly valves.

Roball sifter Complete w/drive. Belt driven by approx 5 HP motor. Discharge trough 12" x 8". 6" feed port.