Evaporation Rate:
100 kg/h
Total Heat Transfer Surface Area:
3.8 m²
Pressure:
3.2 bar
Temperature:
150 °C
Vacuum:
Yes
Additional Information:
single effect falling film evaporator system, product feed approximately 300 kg/hr @ 20 degrees C, product output approximately 200 kg/hr @ 50 degrees C, system includes:
shell -1/3.2 bar @ 150 degrees C (66 liter),
220mm diameter 316 stainless steel (1.4571) shell, with expansion bellows, insulated and clad,
(1) 300 liter 316 stainless steel (1.4571) vertical jacketed separator vessel, manufactured by Wiegand/Becker, pressure internal -1/3.2 bar @ 150 degrees C, jacket: -1/3.2 bar @ 150 degrees C, 508mm diameter x 1500mm straight side
insulated and clad,
(1) 316 stainless steel (1.4571) tube, shell and head vertical preheater/condenser,
manufactured by Wiegand/Becker, serial #3681,
pressure tubeside -1/3.2 bar @ 150 degrees C (46 liter), shell -1/3.2 bar @ 150 degrees C, (5.6 liter), 140mm diameter x 4m long 316 stainless steel shell, (2) 316 stainless steel (1.4571) bolt dished heads, mounted on lugs, insulated and clad,
(1) 316 stainless steel(1.4571) tube, shell and head vertical condenser, manufactured by Wiegand/Becker,
serial #3682, pressure tubeside -1/3.2 bar @ 150 degrees C (61 liter), shell -1/3.2 bar @ 150 degrees C (25 liter), 168mm diameter x 3944mm long 316 stainless steel shell. (2) 316 stainless steel (1.4571) flat heads, Mounted on lugs, insulated and clad,
(3) 316 stainless steel(1.4571) centrifugal circulation pumps, manufactured by Fristam/Stamp, (1) pump is a type FP712/120KF and (2) are type FP712/130KF, 1.1 kW/2900 rpm, openings DN40/PN16 inflow and (1) DN40/PN16 outlet
driven by 1.1 kW, 220-380V/50 Hz/ 2840 rpm, ex proof (T3) motor, mounted on baseplate;
Other ancillaries include, carbon steel framework, control panel, miscellaneous stainless steel pipework,
