Major Items Plastic - IPP# 201975

Type: Plastic

Subtype: Major Items

Manufacturer: Rieter (Maag)

Model: USG 600 H

Condition: Used

Capacity (Design): 4,500 kg/h (9,900 lb/h)

Pressure: 6 bar (87 psi)

USG 600 H, PET pellet mill.
Cutter is Model 1.60/051141, rated 4500 Kg/Hr, 60 strands maximum capacity.
Designed for PET, Specific Weight 1.25 g/CuCM, with 240 to 370 pas viscosity.
Unit produces 4500 Kg/Hr product capacity, with a minimum draw-in speed of 80 m/min, and a maximum draw-in speed of 240 m/min.
Operating voltage is 5000 V/AC, Control Voltage is 230 V/AC; 24 V/DC, 50 Hz with a E E Designed to make a 4mm long x 2.8 x 3.8 diameter pellet.
With a E Ex eII T3 Enclosure. Requires 4-6 bar pneumatic air supply.
0.03-0.05mm cutting gap, 0.2mm cutting gap transport. 2850 Kg Weight for the pellet mill. 280 Kg weight.

Type: Plastic

Subtype: Major Items

Manufacturer: Rieter (Maag)

Model: USG 600 H

Condition: Used

Capacity (Design): 4,000 kg/h (8,800 lb/h)

ET Pellet line including Polymer filtration, through cutting, with quench system. Major items include: (2) 0.38m² / 25 liter 316 SSTi Auto Back Flushing filter, (2) Gneuss Model RSF250 ZP Polymer filter, continous rotary filtration system, (2) 4.0 t/h, s/steel (1.4571) BARMAG tooth wheel pumps, (3) Rieter (Automatik), USG 600 H, PET pellet mill with Rieter Die Head, (1) 29.88 m³/h 32.5m head @ 1465rpm stainless steel (1.4408) centrifugal pump, (1) 35 m³/h 30m head @ 1450rpm stainless steel (1.4408) centrifugal pump, (1) 35 m³/h 30m head @ 1450rpm cast steel (GGG40.3) centrifugal pump, (2) 4.5m³/h 25m head @ 2900rpm stainless cast steel (1.4581) magnetic (14Nm) centrifugal pumps, (2) 2664m³/h carbon steel exhaust fans, (1) 1500 liter/min stainless steel water tank system with stainless steel ribbon, (4) approx 70 liter stainless steel hopper with a stainless steel sieve insert, stainless steel top cover, welded cone bottom, mounted on a stainless steel saddle, (1) pallet with a electrical rope winch.

Type: Plastic

Subtype: Major Items

Manufacturer: Rieter (Maag)

Model: M-USG 900 V

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 6,900 kg/h (15,200 lb/h)

Type: Underwater strand pelletizing system Complete system includes the Rieter M-USG 900 V cutter. strand transfer equipment, pellet cooler and screener The cutter IPP Stock # 205766- Rieter (Maag) the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.
The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. The machine is supplied with an operator control panel. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure. Strand cooling with water, pellet cooling with water on a 200 mm x 7 meter long cooler, Dryer by Aero, Model 800, the Aero dryer is rated for 40 m3/hr. water with 30 kw motor and air throughput of 100 m3/min. Water from the dryer is returned to the process loop. and vibratory screener by Rieter.

Type: Plastic

Subtype: Major Items

Manufacturer: Rieter (Maag)

Model: M-USG 900 V

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 6,900 kg/h (15,200 lb/h)

Type: Underwater strand pelletizing system Components: Rieter M-USG 900 V cutter, strand transfer equipment, pellet cooler, and screener The cutter IPP Stock # 205765- Rieter (Maag), M-USG 900 V the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.
Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile. The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. The machine is supplied with an operator control panel. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure. Strand cooling with water, pellet cooling with water on a 200 mm x 7 meter long cooler, Dryer by Aero, Model 800, the Aero dryer is rated for 40 m3/hr. water with 30 kw motor and air throughput of 100 m3/min. Water from the dryer is returned to the process loop. and vibratory screener by Rieter.