stainless steel (polished) Frewitt Delumper with crushing and grinding system, type Delumpwitt, upto 9000kg/hr flow rate, system includes: (1) stainless steel Frewitt Conwitt 250 conical sieve mill, serial #12014519069, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) stainless steel infeed hopper, (1) stainless steel Frewitt crushing unit, serial #12014532028, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) Frewitt Conwitt 250 vibrating unit, serial #1201459069, internal CE 1258 Ex II 1Dckb T157 degrees C X, external CE Ex II 3D c Ex tD T125 degrees C X, (1) servolift elevating/lifting machine, serial #12885, all mounted on a stainless steel frame

1000 kg/h 120x160 mm drum screen, scraper drum 120x160 mm

Alexanderwerk Pharma pressure internal -1/3 bar @ 145 deg C (91ltr), jacket -1/3.3 bar @ 145 deg C (13ltr) underdriven by a DIETZ 400-690 Volt

Single Rotor Crusher fixed hammers. Crusher walls are 1/4" thick, shaft is 1 15/16" diameter. Unit has a SS feed chute, screen discharge with 1/2" holes230/460 volt motor.

10 HP Fixed knives blunt one side, w/reversible rotor. Unit driven by approx 10 HP, US varidrive. Screw feed driven by 1/4 HP, 3/60/230/460 volt US varidrive 3/60/230/460 volt US varidrive.

w/(3) feed screws. Discharge hopper w/out valve Stirrup type hammers. Rotor belt driven by 30 HP, 3/60/230/460 volt, 1770 rpm TEFC motor. Feeder belt driven by 1/2 HP, 3/60/220/440 volt, 1140 rpm TEFC motor.

100 kg typical batch weight (Polished to a 0.1 Ra Min finish) Standard capacity range is 120-240 liters. This granulator features a through the wall design where the utilities are located outside the clean room. It has a jacket for the base and bowl with temperature sensor. The main impeller is capable of being raised and lowered. The side chopping system has a variable speed control. Discharge is into a through the wall mill model U-20. Features sanitary design and Clean in place. This multipurpose machine can process dry powders, aqueous and solvent granulations, effervescent products, and melt palletization applications. This machinery is electronically controlled. Can be used with Fluid bed dryer IPP stock # 233968.

Mikro Atomizer Rated for 6,000 rpm. Capable of handling capacities from 100 to 1000 lbs/hr, dependent on the material, this machine handles 3 functions in one machine. Pulverizes, air classifies and conveys the material.

fluidised opposed jet milling (grinding air pressure 6 barg, nozzle 0 16mm), 1250 dm3 grinding bin volume, 80 mbar permissible operating pressure in grinding bin, max operating pressure in grinding bin, 5- nozzles, nozzle diameters 14mm, 16mm, 18mm, classifier has 3-wheels, each wheel with 60 vanes wide pitch, narrow pitch 120 vanes, max wheel speed 4000 rpm each whees driven by 5.12 - 16 kw,3/50/415 volt, 940/2940 rpm motor, (1) 1100 liter carbon steel feed hopper weld dished top, weld coned bottom, bottom outlet with 150mm diameter carbon steel screw conveyor, 15.1 rpm speed,

fluidised opposed jet milling (grinding air pressure 6 barg, nozzle 0 16mm) 1250 dm3 grinding bin volume, 80 mbar permissible operating pressure in grinding bin, max operating pressure in grinding bin, 5- nozzles, nozzle diameters 14mm, 16mm, 18mm, classifier has 3-wheels, each wheel with 60 vanes wide pitch, narrow pitch 120 vanes, max wheel speed 4000 rpm, each whees driven by 5.12 - 16 kw, 3/50/415 volt, 940/2940 rpm motor, (1) 1100 liter carbon steel feed hopper weld dished top, weld coned bottom, bottom outlet with 150mm diameter carbon steel screw conveyor, 15.1 rpm speed,

construction with 360 degree SS screen.
Designed for industrial duty, for mixing and depluming of slurries, pastes, liquids, and resins and shredding Unit has vertical shaft with horizontal rotating knives, 360 degrees screen discharge.

minisplit lab jet mill/ air classifier cyclone

construction with 360 degree SS screen.
Designed for industrial duty, for mixing and depluming of slurries, pastes, liquids, and resins and shredding Unit has vertical shaft with horizontal rotating knives, 360 degrees screen discharge.

Ni-Resist, Micro Atomizer Atomizer set up in its own building complete with the following accessories: Feed hopper is 33" wide x 39" long, Super sack unloader with dust collector & bagger, 50 Sq.Ft., 304 SS baghouse with fan. Takes 30 socks 4" diameter x 6' long, Takes 30 socks 4" diameter x 6' long, 51" w x 52" d x 68" h chamber.

Pressure shock resistant design

Rated for 1500 kg./Hr,

pressure 11 bar at 70 degrees C,

side bottom inlet 390mm diameter and 125mm diameter,

top discharge 340mm,

36 pin disk underdriven by 45kW, 3/60/460 volt, 1775 rpm IP65 motor,

24 blade classifier under driven by 11kW, 3/60/460 volt, 1760 rpm motor,

Classifier is rated max. 3100 rpm.

speed 720 to 1775 rpm.

400mm air intake nozzle,

hinged top cover with manually operated opening mechanism

400 to 1200 Lb./Hr., Aljet Roto-Jet mill system designed to grind particles sized from 0.5 to 45 microns. This 304 SS product contact system features all the equipment needed to get into operation immediately, including major equipment, controls, and all associated ductwork. Major components are as follows: One(1) Aljet Roto Mill, Model 30, serial # P-11737-E, 304 SS construction, with integral dynamic classifier. The mill is rated for up to 150 psi, from 40 degrees F to 100 degrees F. The Roto-Jet has opposing grinding nozzles, (4) 11mm in size. The jet mill requires 1800- 2300 scfm of clean air 70 degrees F at 100 psi. The classifier is a model 30 RJ rated for 2000 cfm with a maximum rpm of 3,500 rpm. The classifier is driven by a 30 HP AC motor, with adjustable speed. Adjusting the speed of the classifier controls the rate and particle size of the mill. One(1)Acrison feeder, 304 SS contact, screw type, that feeds product to the mill. It is a model FHM01206, # 749040, with an input HP of 1.5, and a ratio of 15:1. The variable speed drive motor is slaved to the speed of the classifier to control feed to the mill. One(1) exhaust fan, manufactured by American Fan Co., model # R-13403 handle the air movement through the system. Its constructed of carbon steel, and rated for 2017 CFM at 60” SP. This fan is driven by a Siemens AC motor rated for 30 HP at 3600 rpm, and requires 60 hz/3ph/230-460 volts. The frame size is 286TS and its a TEFC motor. One(1) dust collector manufactured by Sly, handles the chore of keeping things de-dusted. The dust collector is 304 SS for product contact and the plenum, and has 432 Sq. Ft. of filtration area. It contains (36)- 16 oz. cloth filters with cages, 5.75” diameter x 6’ long. The air to cloth ratio is 2.89:1. This duct collector also has a 18” x 36” explosion door and fire suppression can be added. The system includes all controls, rotary air locks, and ductwork to set up the machine. The footprint of this machine requires the approximate size of 23' wide x 10' deep x 20' high.

Hammer mill pulverizer with product heater with left hand drive Rated for 1200 rpm with 12 hammers Machine has auto oiler for bearings. With Spinner and blower to move sized product to plant. Weight on hammer mill 14,660 lbs with spinner 22,565 lbs. Product heater is rated 6 mm BTU, CS, North American air dryer powered by natural gas With Blower, Gas train and heater installed on skid. Skid dimensions are 193" long x 61" wide x 74" high. Air inlet is rectangular flange 15" x 11". Air Outlet is round 19" diameter Complete automated fuel train by, with series 2300 turbo blower. Product air heater is also listed under IPP # 221295.

Code # DAS06 Fixed knife 6 blades 1/4" mesh Belt driven by a 10 HP Sterling drive at 1730 rpm

Pressure shock resistant design

Rated for 1500 kg./Hr,

pressure 11 bar at 70 degrees C,

side bottom inlet 390mm diameter and 125mm diameter,

top discharge 340mm,

36 pin disk underdriven by 45kW, 3/60/460 volt, 1775 rpm IP65 motor,

24 blade classifier under driven by 11kW, 3/60/460 volt, 1760 rpm motor,

Classifier is rated max. 3100 rpm.

speed 720 to 1775 rpm.

400mm air intake nozzle,

hinged top cover with manually operated opening mechanism

Pressure shock resistant design

Rated for 1500 kg./Hr,

pressure 11 bar at 70 degrees C,

side bottom inlet 390mm diameter and 125mm diameter,

top discharge 340mm,

36 pin disk underdriven by 45kW, 3/60/460 volt, 1775 rpm IP65 motor,

24 blade classifier under driven by 11kW, 3/60/460 volt, 1760 rpm motor,

Classifier is rated max. 3100 rpm.

speed 720 to 1775 rpm.

400mm air intake nozzle,

hinged top cover with manually operated opening mechanism

Pressure shock resistant design

Rated for 1500 kg./Hr,

pressure 11 bar at 70 degrees C,

side bottom inlet 390mm diameter and 125mm diameter,

top discharge 340mm,

36 pin disk underdriven by 45kW, 3/60/460 volt, 1775 rpm IP65 motor,

24 blade classifier under driven by 11kW, 3/60/460 volt, 1760 rpm motor,

Classifier is rated max. 3100 rpm.

speed 720 to 1775 rpm.

400mm air intake nozzle,

hinged top cover with manually operated opening mechanism

• 316L (1.4404) stainless steel Universal impact mill,
• approx 200kg/hr capacity
• air volume 1800m3/hr to 420m3/hr,
• rated air volume approx 330 m3/hr,
• 174mm diameter rotor, 64mm rotor width,
• 20-beater blades on rotor,
• 16000 rpm speed,
• belt driven by approx 5.5kW motor,
• 3 micron internal sieve plate,
• ATEX rated,
• mounted on a stainless steel table,

up to 2000kg/hr, particle size down to 30μm

highly polished 316 stainless steel (finish Ra <- 0.8u) with Hastelloy C22 feed hopper bottom cone

(24) pharma execution fixed knives/hammers, rotor speed 1000 - 6000 rpm,

ATEX 1D milling chamber, rest of mill is ATEX 2D,

temperature sensors, sampling device, level sensor, pressure sensor, Oxygen sensor,

auxiliary equipment includes:

cleaning rig, Pneumatic vacuum conveyor, feed hopper, feeding device, de-dusting filter type ProFi-clean 90, de-dusting filter type ProFi-clean 250, butterfly valves, Bag holding device, Mettler Toledo scales,

Coffee grinder