Polymer filter continous rotary filtration system1220 SqCm active screen area9500 Cm/Hr capacity, 48000 watt oil/vapor heating capacity, with 2 heater zones. CS construction.RexRoth 11 KW power pack 3/50/500 volt 1460 Rpm. 2900 Kg Filter

diverter valve and screen changer masch #20004017,2- 110 cm2 screens screen dimensions 120mm x 0.5mm x 93mm (+0.5),230-600 kg/hr throughput, heating capacity of the 6-cartirdges is 6 x 1000 watt, Gebhard/HLP type cartridges, hydraulically driven by a Heusinger and Salmon powerpack, powerpack driven by a 11/12.7 kw,3/50/60/380/660/420/720/380/660/480/830 volt,1440/1465/1730/1755 rpm 2-speed motor, local control panel on a davit,

plastic 'Utiliser' dry granulator model 20-strand 321 stainless steel rotor with cutting blades motor : 50/60 Hz, 400/380/415 volt, 981/982/1184 rpm , IE2 CE motor aluminium chamber with hinged top inspection cover

type 20-48T Plastic 'Utiliser' dry granulator Model 20-strand 321 stainless steel rotor with cutting blade Aluminium chamber with hinged top inspection cover driven by 15 kw, 3 phase, 50/60 Hz, 400/380/415/460/660/690 volt, 970/975/1180 rpm

plastic 'Utiliser' dry granulator model 20-strand 321 stainless steel rotor with cutting blades motor : 50/60 Hz, 380/400/415/460/660/690 volt, 970/975/1180 rpm aluminium chamber with hinged top inspection cover

centrifugal dryer, for plastic pellets/granules rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h

stainless steel fluid bed crystallizer used on PET pellets with heated nitrogen total pressure drop, ca.30 mbar, differential pressure ca 2 mbar, design pressure pe=90 mbar product thickness ca.200mm approximate bed with glass inspection hatches 1.6m wide x 3.3m long x 500mm deep with glass inspection hatches Openings include: product inlet 100mm diameter with rotary valve, hot air inlet 700mm diameter, hot air outlet 700mm diameter, product outlet 150mm x 185mm, chamber with hood,

continous Buhler Pulse bed crystalizer system With Gas to Gas heat exchanger, gas blower, and cyclone seperator Used as a crystallizer for Solid State Polymerization.

• Used on PET pellets, fluid bed crystallizer, product weight 720-820 kg/m3, granule density 1340 kg/m3, viscosity of granule 830.

• Automatik USG300/2 cutting system Including 2 cutters, 1 dryer and controls33-60 strands800/1200/1500mm strand guide length, 80-350 m/min draw in speed.230/460 VAutomatik Dryer Model GT400/2 – L0, Machine number 18.021-602, (Blower fan not available). Includes operating spare cutter.

24" wide, wet cut, waterslide pelletizer Serial # not available Explosion proof controls, belt driven cutter head Pneumatic assist cover

Vibrating fluid bed with enclosed chamber rated pe=60 mbar total pressure drop, ca.30 mbar differential pressure ca 2 mbar design pressure pe=90 mbar @ 200 deg C, 400 deg C product thickness ca.200mm Openings include: product inlet 100mm diameter with rotary valve, hot air inlet 700mm diameter, hot air outlet 700mm diameter, product outlet 150mm x 185mm, chamber with hood

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.
The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.

50m /h" radius curved screen 149 micron mesh, (1) 30 m3/hr @ 50m head KSB centrifugal pump, type Etachrom-BC, driven by 7.5 kw, 3/50/400/690 volt 2910 rpm motor, (1) 80 GPM stainless steel hot water tank, electric heated 700mm diameter x 700mm straight side,

3" inlet x 3" outlet steam heated hot melt gear pump

Continous, plastic pellet heater Approximatly 4" diameter x 12" long chamber, 3/4" diameter jacketed discharge. Electrically heated chamber, with roatary gear pump on discharge.

Type: Underwater strand pelletizer

the vertical design provides space savings and easy access to the cutter head. Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head.The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kWThis system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile. The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.

Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile. The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.

10,000 PPH, (max rate) high capacity weight blend system manufactured by Universal Dynamics, Inc. (Una Dyne). This unit consists of the following sub assemblies: Load Cell/weigh hopper, with blend bins. (Material is batch weighed prior to the mixer). The Mixer assembly that insure a consistent product mix. Feed assembly, assures feed is ready for the weight hopper. And a floor mounted dust collector for any dust generated. With controls.

pellet size 3.2mm x 3.2mm, 18 m3/hr water rate (max), 3-rotor screens top side mounted 0.61 m3/second blower, driven by 0.66 kw, 2850 rpm motor, agglomarator catcher, 5-sets of 4 spray nozzles, belt driven by 5.5 kw, 3/50/60/400/690 volt, 1455/1755 rpm motor,

high speed hammer mega mill/Granulator 4 stainless steel hammers front hindged door 450 square inch screen area

underwater pelletizer die plate heating 12 x 800 Watt = 9600 Watt (400 volt) die plate working temperature 315 degrees C (max) service pressure before die plate 250 bar (max) supply pressure for pneumatic control 3.5 bar supply for pneumatic blade pressure control 5 bar (max) pellet rate 250 kg/hr pellet rate pellet size 2mm x 2mm, water rate 20 m3/hr direct driven by 11 kw, 3/50/400/690 volt

250-500kg/hr Maag hot melt gear pump viscosity at 10/sec 70 to 3000 Pas inlet pressure 10 bar, outlet pressure 250 bar, (4) heating cartridges (1250 Watt, 415 volt), driven by 18.5 kw, 3/50/60/380/420/480 volt, 1457-1465/1740-1765 rpm mounted on a carbon steel frame,

plastic 'Utiliser' dry granulator model 20-strand 321 stainless steel rotor with cutting blade aluminium chamber with hinged top inspection cover