APV spin flash dryer system 1450 Kg/Hr air flow , 685 Kg/Hr feed volume 70% DS in the feed, 485 Kg/Hr powder production @ 1% humidity. Direct heated, 22 NCuM/Hr gas conusmption, 15 Kw power consumption, 7 NCuM/Hr Compressed air consumption With air Heater, filters etc. Does not include controls.

2500 lbs/ hour feed, 2357.5 lbs/hr product feed rate, .3 to .4% product moisture. with integral internal classifier, 1.75" venturi feed injector.
Cyclone collector discharge, model 30, with 10 CuFt Vortex breaking bin and 304 SS rotary airlock on cyclone bottom. Blowers include (1)American Fan Turbo Pressure Blower, model VP-6-08-25B, driven by a 30HP TEFC motor and (1)American Fan Turbo Pressure Blower, driven by a 25HP TEFC motor. Dryer heated through an American Standard Steam Coil air heater with 304SS headers. All 304SS interconnecting 12" diameter ductwork.

original product (Artificial Sweetener) design rate Micron Pulverizer/Dryer Micron pulverizer/dryer/classifier is 304SS with (2) 32" x 24" access doors Pulverizing section, is driven by a 50 HP 3/60/460V motor,600 rpm 39.4" diameter Classifying section is driven by a 10HP 3/60/460V motor, 45 to 450 rpm rotor speed. With delumper, live bottom feed bin, Micron/Hosokawa pulverizer/dryer/classifier Original product designed 770 to 925 Lbs/Hr, of 50% solids feed, drying to an end product moisture content of 4%, 0.46 Specific Gravity, and particle size of 100 to 325 mesh Crystals are dropped into a 304SS Jacobson delumper, which discharges into 100 cu ft 304LSS live bottom bin, 60" diameter x 54"SS. 16.4 to 164 rpm with a 3" diameter screw. This feeds into the bottom of the Hosokawa Micron pulverizer/dryer/classifier, and remains in the dryer until the desired particle size is met. The product fineness is accomplished by changing rotor speed of the classifier and air flow. The hot air flows enter the bottom of the dryer with the product con-currently. The dried particles are discharged through a classifier at the top of the dryer Heater not included, but original design was: Inert heating gas inlet temperature is 300 degrees F(149 deg. C); Heating gas outlet temperature is 192 degrees F (90 deg C); Heating gas flow rate is 4,800 SCFM (21, 390 lbs.hr; Maximum Thermal Capacity is 60,700 to 81, 300 BTU/Min; Product outlet Temperature is 90 to 110 degrees F. Con-current air flow design Previous use: Artificial Sweetener No Heater and no controls

• 309 kg./hr. feed rated, Product rate is 120 kg./hr.at 10 % w/w moisture.
• Sanitary, and Rated for food grade with Clean in Place.
• Mode of heating is by natural gas. The flash drying system consists of the following main components:
• One 316 SS feed hopper, with a 304 SS contact air heating section.
• One FD blower, 3304 SS, rated for 14,500 m3/hr., with a direct fired Maxon burner.
• A Swirling air disperser, 2000 mm overall, manufactured from 304 SS,
• One exhaust air section.
• Complete with piping, interconnections, and controls.
• CIP Tank and pump, pump is a Grundfos, serial 0001, Model A96545627P21924, type CRI20-3 A-FGJ-A-V-HOOV. 5.5 kW, 60 Hz, 3526 Rpm63.3 m3 head(max), 16 bar/90 Degrees C. CCW rotation. CE certified.