0 items
Asset Type
Unit Preference
- Contour screen bowl centrifuge.
- Reliance 444T frame TEFC motor
- Oil system driven by a Reliance143T TECF, 1 hp 3/60/460 volt motor
About Equipment #99990
Some basic information here.
This is a heading 2
Features:
Check out these features.
Feature 1
Feature 2
- Feature 2-a
- Feature 2-b
- Feature 2-c
Feature 3
That about wraps it up. Here's an edit link.
single lead conveyor w/hardfacing Used on Dorr Oliver 16L and Flottweg Z3L
- Contour screen bowl centrifuge
- Main drive is a Reliance 444T frame TEFC motor200 hp, 3/60/460 volt
- Oil system driven by a Reliance143T TECF1 hp 3/60/460 volt motor
contour screen bowl centrifuge Includes 1HP oil system drive. With spare rotating assembly and gear box.
decanter Screen Bowl Rotating assembly hogged out cake discharge ports eppcentric liquid weir dams, 4" double lead conveyor, with bearings on both ends...
solid bowl centrifuge CS bowl and scroll with ceramic flights
decanter Contour bowl design 3 phase seperation With ajustable weirs Average flow rate for feed is 35 gpm Originally built with a 110 mm pitch Main motor : CE rated 50 CYC, 400 volt, 60 cycle 460 volt Back drive: 4 KW 3/50/380 volt motor, 1440 rpm.
Sharples Penwalt (Alfa Laval) P-2000 centrifuge
360 degree solids discharge,
No backdrive, torque arm control.
Positive lock weir damns.
Complete with main drive,
gearbox,
feed tubes, and base
duplex stainless steel 80 mm slope sludge density max filling volume 33,4 kg Motor: IP 55 two-stage planetary drive Single thread screw construction material: bowl and hubs 1.4462 stainless steel, screw hub and flanks construction material: bowl and hubs 1.4462 stainless steel, screw hub and flanks 1.4462/1.4571 stainless steel, casing 1.4571/ 1.4401 stainless steel, carbon steel frame,
4 1/4" pitch single lead with 1 3/8" welded hardsurfacing Solid flights Feed ports have welded hardsurfacing.
Designed for food grade and acceptable for use in Class 1 Div 2 group D areas and is fume tightSP. Rated for 10,600 lbs./hr. of feed, 9100 lbs./hr. of centrate and 1500 lbs./hr.cake. Rated for 80 degrees F.Bowl has special abrasion protection on the feed and conical section of the machine.Includes vibration sensor. Control panel includes PLC for automated dewatering. Only 30 hours of operation!
With V belt drive to gear reducer.
decanter centrifuge with 10/3 deg contour on bowl tapper. 4 1/2" pitch double lead non-hardsurfaced conveyor w/rinse. 40:1 gearbox
vertical, super centrifuge with classifier design bowl solids holding capacity 5.3 liter inner bowl 124mm
solid bowl decanter Nominal speed 2750 rpm motor w/clutch Rated 5000 liters/hr @ 20% solids for rendering applications
solid bowl decanter centrifuge With one cylindrical section. with a max. centrifugal acceleration of 4700 (XG)Scroll differential is 12 (normal) with a maximum of 27.Rated for 1,200 liters/hr. With Back drive. 4.3: 1 ratio sludge scraper motor is 0.18 kW.
duplex stainless, solid bowl decanter with back drive, 2-phase separation 360 degree solids outlet Manufacturer specified flow rate in GPM is 200 to 400 Designed for 81 lbs/Cubic foot specific gravity of material. Main rotating assembly components are centrifugally cast Duplex Stainless Steel type 4462 Main drive is a 125 HP 3/60/230/460 volt and hydraulic power pack Scroll is driven by a 40 HP 3/60/230/460 volt TEFC motor. (2) Liquid discharge flanges, 1060 mm wide x 309.45 mm each. Solids discharge flange is 1060mm wide x 460 mm. Overall Dimensions: 5700.68 mm Long X 1406.6 mm wide x 1561.20 mm high. Rotating Assembly 8,054 lbs; complete centrifuge with filling (1.0 S.G.) 18,100 lbs Manufactures states the flight pitch is 9-10 degrees.
Continuous feed type 10 degree cone on bowl Left hand rotation Back drive is 25 hp. at 3600 rpm, 460 volts
Decanter Centrifuge Gas Tight housing Worm lengh is 600 mm x 220/125mm diameter With spare rotating assembly, worm, and gear box
- 353/202mm diameter, 2-phase solid bowl decanter centrifuge.
- Working speed 3250 rpm minimum feed temperature 0 degrees C (32 degrees F),maximum feed temperature 100 degrees C (212 degrees F)stainless steel hinged top cover, screw plated with Wolfram-Carbide plates
- CE confirm, with tools for bowl and basket services.
decanter centrifuge 12mm thick basket specific gravity 2 kg/dm3 volume 10 m3/hr
decanting centrifuge Job Number 139431 Requires motor
conical solid bowl centrifuge 4 1/4" pitch double lead non-hard surfaced conveyor 1-piece, 3 setting, plate dam. Screw impellor discharge (no collector) Vaporseal design
- Conical solid bowl centrifuge
- 4 1/4" pitch double lead conveyor w/hard surfacing.
- (4) eccentric plate dams.
- Vapor seal design.
- Less gearbox, torque control, feed tube, drive motor, subbase and guards.