Quote
Quote Cart
clear all items
All Equipment Compressors

Compressors - Used and Surplus Inventory | IPP

Used compressors for sale: air and gas compression systems for industrial utilities

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Dresser Rand
Compressor
Clear all filters
Featured

Top Compressors in stock

Highest-ranked available inventory for this selection.

Browse

Select a Compressor type

Choose a subtype for a more focused set of listings.

Subtypes
All Compressors Centrifugal Reciprocating Rotary
Refine Results

Narrow these listings

Specifications
Results 3 items found

Available Compressors

Showing 3 of 3 matching Compressors.

Featured
Stock Number: #212987
Centrifugal Wet Gas Compressor Unused, Dresser-Rand Model D18R6B
Compressor Type: Centrifugal
Inlet Pressure: 20.9 psi
Discharge Pressure: 193.7 psi
Flow Rate: 24,200 CFM
Speed (RPM): 5,653
Additional Information: Wet Gas Compressor Radial Split case two stage compressor motor through a Lufin gear reducer The Datum compressor is an 18 frame size(inside case diameter) with a radial split case, six impellers and a back to back rotor design. The machine features a lube skid that supports the compressor, motor and gear, a gas skid for the double Dry Gas seals, and instrumentation for vibration and temperature detection. MMSCFD Dry: 49.73; Lbs/Hr Wet: 224,820; Inlet PSIA: 20.9; Inlet Temp: 106 Degree F; Inlet ACFM Wet: 24,183 Designed for Outdoor Use, Under roof.
All Electricals are Class 1, Group CD, Division 2. Speeds: Maximum Continuous 5,653 RPM, Trip Speed 5,719, CCW rotation from drive end. With one piece shaft. Motor, Gear reducer, and Compressor skid mounted.
Lufkin Gear reducer, 3.178:1 ratio, rated 10,300 HP. The Oil control system is by Cobey, and skid mounted. The Seal gas system and skid are by Flowserve.
More Details ⟶
Stock Number: #211969
Dresser Rand 2HSE-2 Reciprocating Compressor
Compressor Type: Reciprocating
Inlet Pressure: 22.4 bar
Discharge Pressure: 61 bar
Flow Rate: 1,650 m3/h
Additional Information: 2-stage reciprocating gas compressor system stage 1 with 5.25” bore, 9” stroke, normal discharge pressure 562 psig, rated discharge pressure 1500 psig, max working pressure 1650 psig, max discharge gas temperature 350 deg F (177 deg C), max cooling water pressure 75 psig, stage 2 with 4” bore, 9” stroke, normal discharge pressure 887.5 psig, rated discharge pressure 3300psig, max working pressure 3650 psig, max discharge gas temperature350 deg F (177 deg C), max cooling water pressure 75 psig, (1)1st stage discharge dampner, 80ltr carbon steel horizontal pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 45 barg @ 200 deg C, weld dished ends (1) 1st stage suction dampner, 80ltr carbon steel horizontal pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 24 barg @ 200 deg C, weld dished ends (1) 1st stage intercooler, 4.4 sqm carbon steel horizontal ‘U’ tube heat exchanger, manufactured by Bronswerk Heat Transfer, job #30264, type 15-BEU-34, design pressure tubeside 120 barg @ 200 deg C, shell side 10 barg @ 60 deg C, (13) 15.8mm diameter x 2.32 x 3.4m long ‘U’ tubes, bolt flat head (1) 2nd stage discharge dampner, 50ltr carbon steel horizontal pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 71 barg @ 200 deg C, weld dished ends (1) 2nd stage suction dampner, 80ltr carbon steel horizontal pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 45 barg @ 200 deg C, weld dished ends (1) 2nd stage after cooler, 4.4 sqm carbon steel horizontal ‘U’ tube heat exchanger, manufactured by Bronswerk Heat Transfer, job #30267, type 15-BEU-34, design pressure tubeside 288 barg @ 200 deg C, shell side 10 barg @ 60 deg C, (13) 15.8mm diameter x 2.32 x 3.4m long ‘U’ tubes, bolt flat head (1) line separator, 37ltr carbon steel vertical pressure tank, manufactured by Peerless Europe ltd, job #93/1127/11, design pressure 45 barg @ 200 deg C, weld dished top and bottom (1)liquid collection pot, 13ltr carbon steel vertical pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 71 barg @ 200 deg C, weld dished top and bottom (1) 2nd stage separator, (stand alone), 240ltr c/steel vertical pressure tank, manufactured by Paul & Loughran ltd, design pressure 300 barg @ 150 deg C
More Details ⟶
Stock Number: #212814
6,000 m3/h (3,550 CFM) Carbon Steel Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 358 psi
Discharge Pressure: 914 psi
Flow Rate: 3,550 CFM
Inlet Diameter: 10 in
Speed (RPM): 11,000
Additional Information: Centrifugal compressor with eight impellers Inlet pressure 358 psia, inlet temperature 50 degrees F. This compressor has an average compressibility factor of 1.013 Cooling water temperature is 85 degrees F, and after intercooling is 100 degrees the first critical speed is 5,400 rpm. The compressor rpm is 10,440, with a bhp of 8228 Up connected intake and discharge flanges, the suction is 10" and the discharge is 8" . The case design pressure is 1000 psi for the inlet and discharge. This compressor has a common lube system with other pieces in the train and two ring oil seals. Originally driven by a steam turbine (not included).
More Details ⟶
Request a Quote

Discover used, secondhand and surplus compressors from IPP – oil-free, rotary and reciprocating models ready to ship

IPP’s ready-to-ship compressors deliver performance and help you save time and money on plant utilities

When your operation depends on reliable gas compression for process, storage, or transfer, industrial compressors deliver the performance needed to keep operations moving. With over 47 years of process equipment expertise, IPP provides immediate access to high-quality used compressors sourced from 20 complete plant sites and included in our inventory of over 15,000 ready-to-ship pieces of equipment. Choosing used compressors from IPP helps companies reduce capital costs, shorten procurement timelines, and maintain consistent system reliability.

Industrial compressors are designed to increase the pressure of gases for transportation, storage, or process operations. They are essential for applications across chemical manufacturing, energy production, food and beverage processing, and general industrial services.

Primary uses across industries

  • In chemical processing, compressors move feed gases through reactors and separation units.
  • In oil and gas, they transport natural gas, vapor recovery, and process gas management.
  • In food and beverage production, compressors provide air for packaging lines, fermentation, and pneumatic systems.
  • In pharmaceutical manufacturing, they supply clean compressed air for production and packaging.
  • In industrial utilities, compressors operate pneumatic tools, controls, and facility services.

Types of materials processed

  • Air for pneumatic systems and utilities
  • Process gases such as nitrogen, oxygen, hydrogen, and carbon dioxide
  • Hydrocarbon gases like methane, ethylene, and propane
  • Refrigerants for process cooling systems

Common materials of construction

Compressors are designed for durability, chemical compatibility, and safe operation under pressure:

  • Stainless steel for corrosive gas handling and sanitary applications
  • Carbon steel for general compressed air and inert gas services
  • Specialty alloys for high-pressure, high-temperature, or reactive gas environments

Key features of industrial compressors

  • Reciprocating, rotary screw, centrifugal, and diaphragm designs available
  • Oil-lubricated and oil-free models for different process needs
  • High-pressure and variable speed options for flexible operations
  • Skid-mounted systems for easy integration into existing facilities
  • Built-in safety and control systems to ensure operational reliability

Learn more about industrial compressor selection and optimization from Plant Engineering.

Find your industrial compressor at IPP

Search the IPP inventory or contact IPP’s equipment experts to find a used compressor that fits your plant’s needs. With ready-to-ship inventory, IPP helps companies increase uptime, lower costs, and maintain reliable gas handling operations.

FAQ

Compressor FAQ

Have questions about Compressors or our services? Learn more about our products and why customers choose IPP.

What industries rely most on industrial compressors?
Chemical, oil and gas, food and beverage, pharmaceutical, and general manufacturing industries all rely on compressors for essential process and utility functions.
How do rotary screw compressors compare to reciprocating compressors?
Rotary screw compressors are ideal for continuous duty and large volume needs, while reciprocating compressors are better suited for smaller volumes and higher-pressure applications.
What maintenance is required for industrial compressors?
Regular maintenance includes checking oil levels, inspecting seals and bearings, monitoring pressure settings, and replacing filters to ensure efficient and safe operation.
What are the benefits of buying used or secondhand process equipment from IPP?
Buying used from IPP can save up to 70% compared to new equipment, allow for faster project implementation, support sustainability, and leverage over 47 years of industry expertise.