Quote
Quote Cart
clear all items
All Equipment Evaporators

Evaporators - Used and Surplus Inventory | IPP

Used evaporators for sale: efficient separation for solvent recovery and product concentration

Searching equipment…
Active Filters
Equipment
Manufacturer: Carl Canzler
Evaporator
Clear all filters

Top Evaporators in stock

Highest-ranked available inventory for this selection.

Select a Evaporator type

Choose a subtype for a more focused set of listings.

Narrow these listings

Specifications

Available Evaporators

Showing 6 of 6 matching Evaporators.

Stock Number: #211636
Evaporation Rate: 95 lb/h
Total Heat Transfer Surface Area: 1.8 m²
Diameter: 470 mm
Height: 3,150 mm
Pressure: 5 bar
Temperature: 250 °C
Internal Condenser: Yes
Internal Condenser size: 29.1 ft²
Vacuum: Yes
Drive Type: Eberhard Bauer DKF 941AH/241
Additional Information:

Short Path wiped film evaporator system with internal condensor includes SS cold trap. Rated 490 liter 20 liter in the jacket Top mounted rotor drive with a 1.5 kw, 50 Hz gear motor with mechanical seal on rotor, graphit wipers on rotor. .2.7 SqM internal tube condenser, inlet and outlet for condensor in Bottom head. Evaporator has a side bottom discharge for product. Vessel weight empty, 700 kg; motor and rotor 350 kg.

More Details ⟶
Stock Number: #211749
Total Heat Transfer Surface Area: 1.8 m²
Orientation: Vertical
Diameter: 470 mm
Height: 3,150 mm
Pressure: 5 bar
Temperature: 250 °C
Internal Condenser: Yes
Internal Condenser size: 29.1 ft²
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Additional Information:

Short Path wiped film evaporator system with internal condensor includes SS seperator tank Rated 490 liter 20 liter in the jacket. Top mounted rotor drive with a 3 kw, 50 Hz gear motor with mechanical seal on rotor. Graphie wipers on rotor Unit has a bolted bottom head with 2.7 SqM internal tube condenser, inlet and outlet for condensor in Bottom head. Evaporator has a side bottom discharge for product. Vessel weight empty, 700 kg; motor and rotor 350 kg.

More Details ⟶
Stock Number: #211741
Evaporation Rate: 350 lb/h
Total Heat Transfer Surface Area: 6.5 m²
Diameter: 900 mm
Height: 4,700 mm
Pressure: 5 bar
Temperature: 250 °C
Internal Condenser: Yes
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: Brown Boveri eOU 112 MB 4
Additional Information:

Short Path wiped film evaporator system with internal condensor includes SS seperator tank. Rated 2000 liter 95 liter in the jacket. Top mounted rotor drive with a 3.7 kw, 50 Hz gear motor with mechanical seal on rotor, Graphite wipers on rotor. Evaporator has a side bottom discharge for product. Vessel weight empty, 2600 kg; motor and rotor 800 kg.

More Details ⟶
Stock Number: #211750
Evaporation Rate: 95 lb/h
Total Heat Transfer Surface Area: 1.8 m²
Orientation: Vertical
Diameter: 470 mm
Height: 3,150 mm
Pressure: 5 bar
Temperature: 250 °C
Internal Condenser: Yes
Internal Condenser size: 29.1 ft²
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: Berhard Bauer DKF 941AH/241
Additional Information:

Short Path wiped film evaporator system with internal condensor includes SS seperator tank Rated 490 liter 20 liter in the jacket Top mounted rotor drive with a 1.7 kw, 50 Hz gear motor with mechanical seal on rotor. Rotor has graphite wipers. 2.7 SqM internal tube condenser, inlet and outlet for condensor in Bottom head. Evaporator has a side bottom discharge for product. Vessel weight empty, 700 kg; motor and rotor 350 kg.

More Details ⟶
Stock Number: #211632
Evaporation Rate: 160 lb/h
Total Heat Transfer Surface Area: 3 m²
Orientation: Vertical
Diameter: 600 mm
Height: 1,750 mm
Pressure: 5 bar
Temperature: 250 °C
Internal Condenser: Yes
Internal Condenser size: 48.4 ft²
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: Eberhard Bauer DF 1A41AH/283
Additional Information:

Short Path wiped film evaporator system with internal condensor 650 liter internal 45 liter in the jacket top mounted rotor drive with a 2.2 kW/50 Hz gear motor with mechanical seal on rotor, (72) Graphit wipers on rotor wipers dimensions: 30mmx16mmx150mm; shell thickness: 8.0 mm; evaporator has a side bottom discharge for product 4.5 m² internal condensor: with (40)pipes, 25 mm outside diameter x 2270 mm long x 1.5 mm thickness

motor data: 380 V/2.2 kW/50 HZ/1420 rpm, exproof (G3), mfd by EBERHARD BAUER - Germany; (1) separately 1.3 m² s/steel cold trap, mfd by Chematec AG - Switzerland, rated tube side 2 bar, rated shell side 5 bar, 368 mm diameter x 1420 length total. Mounted on (2) lugs.

More Details ⟶
Stock Number: #211633
Evaporation Rate: 320 lb/h
Total Heat Transfer Surface Area: 6 m²
Orientation: Vertical
Diameter: 900 mm
Height: 4,700 mm
Pressure: 5 bar
Temperature: 250 °C
Internal Condenser: Yes
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: Eberhard Bauer DF 2A45HZ/309
Additional Information:

Short Path wiped film evaporator system with internal condensor Includes 2.9m² SS cold trap Rated 2000 liter 95 liter in the jacket Top mounted rotor drive with a 3.7 kw, 50 Hz gear motor with mechanical seal on rotor Evaporator has a side bottom discharge for product Vessel weight empty 2600 kg; motor and rotor 800 kg.

More Details ⟶

Browse used, surplus and secondhand evaporators from IPP – in stock and optimized for chemical, pharma and food processing

Save time and money with IPP’s ready-to-ship evaporators for distillation, purification and thermal separation

Used evaporators are thermal separation systems that concentrate solutions, recover solvents, or reduce waste volume by vaporizing liquid components. These systems are essential across industries where product purity, yield, and cost-efficiency matter. With more than 47 years of industry expertise, IPP offers used, secondhand and surplus evaporators from 20 complete plant sites and a massive inventory of over 15,000 systems ready to ship.

Evaporators are available in multiple configurations—falling film, rising film, forced circulation, wiped film and multiple-effect systems—each tailored for specific viscosity, temperature sensitivity and throughput needs.

Primary uses across industries

  • In pharmaceuticals, evaporators concentrate APIs and remove solvents during intermediate processing
  • In chemical manufacturing, they purify products and reclaim valuable solvents from process streams
  • In food and beverage, they concentrate juices, dairy products, extracts and syrups
  • In wastewater treatment, they reduce volume and recover reusable components

Types of materials processed

  • Heat-sensitive or solvent-based mixtures
  • Aqueous solutions, organic solvents and slurries
  • Viscous liquids and high-solid content mixtures

Common materials of construction

Evaporators are built for long service life, cleanability and chemical resistance:

  • Stainless steel for sanitary and corrosion-resistant applications
  • Hastelloy and other alloys for aggressive chemicals
  • Glass-lined steel for ultra-pure or reactive materials

Key features of industrial evaporators

  • Available as single-effect or multi-effect systems for energy efficiency
  • Options for vacuum operation to protect heat-sensitive materials
  • Integration with distillation, crystallization or solvent recovery units
  • Configurable heating sources: steam, hot oil, or electric
  • Designed for clean-in-place (CIP) and automated control systems

Learn more about evaporator types and applications in process industries from Chemical Engineering.

Find your evaporator at IPP

Search the IPP inventory or contact IPP’s equipment experts to locate the ideal used, secondhand or surplus evaporator for your facility. Whether for concentration, recovery or purification, IPP helps you save time and money with precision systems ready to ship.

Evaporator FAQ

Have questions about Evaporators or our services? Learn more about our products and why customers choose IPP.

What’s the difference between falling film and forced circulation evaporators?
Falling film evaporators are ideal for heat-sensitive materials and lower viscosities, while forced circulation systems handle higher solids and fouling-prone feeds.
Can used evaporators be modified for new applications?
Yes – many units can be reconfigured with new instrumentation, controls or materials of construction to meet changing process needs.
Are multi-effect evaporators more energy efficient?
Absolutely – they reuse vapor from one stage to heat the next, reducing overall steam consumption and operational costs.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP provides faster lead times, cost savings and global support from a team with 47+ years of process plant experience.