Quote
Quote Cart
clear all items
All Equipment Plastics Major Items

Plastic Inventory - Search Major Items Plastics | IPP

Used plastic processing equipment for sale: cost-effective solutions for injection molding, extrusion, and recycling

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Rieter (Maag)
Plastic
Subtype: Major Items
Clear all filters
Featured

Top Major Items in stock

Highest-ranked available inventory for this selection.

Browse

Compare related Plastic types

Subtypes
All Plastics Crystallizer/Evaporator Grinder and Granulator Major Items Miscellaneous
Refine Results

Refine Major Items

Specifications
Results 12 items found

Available Major Items

Showing 12 of 12 matching Major Items.

Stock Number: #218283
Stainless Steel 316 Rieter (Maag) USG-300/2 Cutting System
Capacity (Design): 9,250 lb/h
Length: 1,500 mm
Additional Information: • Automatik USG300/2 cutting system Including 2 cutters, 1 dryer and controls33-60 strands800/1200/1500mm strand guide length, 80-350 m/min draw in speed.230/460 VAutomatik Dryer Model GT400/2 – L0, Machine number 18.021-602, (Blower fan not available). Includes operating spare cutter.
More Details ⟶
Stock Number: #205767
Stainless Steel 316 Major Items Plastic
Capacity (Design): 6,900 kg/h
Pressure: 160 bar
Temperature: 350 °C
Additional Information: Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.
The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.
More Details ⟶
Stock Number: #201975
Major Items Plastic
Length: 12 in
Feeders: 304SS Acrison 101-D feeder
Additional Information: Continous, plastic pellet heater Approximatly 4" diameter x 12" long chamber, 3/4" diameter jacketed discharge. Electrically heated chamber, with roatary gear pump on discharge.
More Details ⟶
Stock Number: #205764
Underwater Strand Pelletizer/Cutter Rieter (Maag) M-USG 900 V
Capacity (Design): 15,200 lb/h
Pressure: 2,300 psi
Temperature: 662 °F
Additional Information: Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head. Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head.The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kWThis system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.
More Details ⟶
Stock Number: #205765
Stainless Steel 316 Major Items Plastic
Capacity (Design): 15,200 lb/h
Pressure: 2,300 psi
Temperature: 662 °F
Additional Information: Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile. The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.
More Details ⟶
Stock Number: #205766
Stainless Steel 316 Major Items Plastic
Capacity (Design): 6,900 kg/h
Pressure: 160 bar
Temperature: 662 °F
Additional Information: Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile. The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.
More Details ⟶
Stock Number: #219232
Major Items Plastic
Capacity (Design): 4,000 kg/h
Additional Information: ET Pellet line including Polymer filtration, through cutting, with quench system. Major items include: (2) 0.38m² / 25 liter 316 SSTi Auto Back Flushing filter, (2) Gneuss Model RSF250 ZP Polymer filter, continous rotary filtration system, (2) 4.0 t/h, s/steel (1.4571) BARMAG tooth wheel pumps, (3) Rieter (Automatik), USG 600 H, PET pellet mill with Rieter Die Head, (1) 29.88 m³/h 32.5m head @ 1465rpm stainless steel (1.4408) centrifugal pump, (1) 35 m³/h 30m head @ 1450rpm stainless steel (1.4408) centrifugal pump, (1) 35 m³/h 30m head @ 1450rpm cast steel (GGG40.3) centrifugal pump, (2) 4.5m³/h 25m head @ 2900rpm stainless cast steel (1.4581) magnetic (14Nm) centrifugal pumps, (2) 2664m³/h carbon steel exhaust fans, (1) 1500 liter/min stainless steel water tank system with stainless steel ribbon, (4) approx 70 liter stainless steel hopper with a stainless steel sieve insert, stainless steel top cover, welded cone bottom, mounted on a stainless steel saddle, (1) pallet with a electrical rope winch.
More Details ⟶
Stock Number: #219830
Major Items Plastic
Capacity (Design): 4,500 kg/h
Pressure: 6 bar
Additional Information: USG 600 H, PET pellet mill.
Cutter is Model 1.60/051141, rated 4500 Kg/Hr, 60 strands maximum capacity.
Designed for PET, Specific Weight 1.25 g/CuCM, with 240 to 370 pas viscosity.
Unit produces 4500 Kg/Hr product capacity, with a minimum draw-in speed of 80 m/min, and a maximum draw-in speed of 240 m/min.
Operating voltage is 5000 V/AC, Control Voltage is 230 V/AC; 24 V/DC, 50 Hz with a E E Designed to make a 4mm long x 2.8 x 3.8 diameter pellet.
With a E Ex eII T3 Enclosure. Requires 4-6 bar pneumatic air supply.
0.03-0.05mm cutting gap, 0.2mm cutting gap transport. 2850 Kg Weight for the pellet mill. 280 Kg weight.
More Details ⟶
no image found
Stock Number: #233813
Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic
Capacity (Design): 6,900 kg/h
Additional Information: Underwater strand pelletizing system Cutter included: Rieter M-USG 900 V Strand transfer equipment included Pellet cooler included Screener included The cutter IPP Stock # 205764- Rieter (Maag), M-USG 900 V Underwater strand pelletizer, vertical design, 316 SS contact, where the vertical design provides space savings and easy access to the cutter head Designed to process PET with the following properties: Melt density: 1.18 g/cm3 Solid density: 1.34 g/cm3 Melt temperature: 285-290 degrees C Viscosity: 200-500 Pas 90 strands with- Quick change cutting head Cutter head diameter: 162.5 mm a maximum throughput of 6900 Die plate design (pn# 10295462) with 5.5 mm hole diameter Cutter head teeth: 30 Helix angle: 2 degrees Tooth profile: #2 The cutter main drive system is direct drive, with a three phase AC motor The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure. Strand cooling with water, pellet cooling with water on a 200 mm x 7 meter long cooler, Dryer by Aero, Model 800, the Aero dryer is rated for 40 m3/hr. water with 30 kw motor and air throughput of 100 m3/min. Water from the dryer is returned to the process loop. and vibratory screener by Rieter.
More Details ⟶
no image found
Stock Number: #233812
Underwater Cutter/ Strand Pelletizer Rieter (Maag) M-USG 900 V
Capacity (Design): 6,900 kg/h
Additional Information: Type: Underwater strand pelletizing systemIncluded components: Rieter M-USG 900 V cutter, strand transfer equipment, pellet cooler, and screenerThe cutter IPP Stock # 205767- Rieter (Maag), M-USG 900 Vthe vertical design provides space savings and easy access to the cutter headDesigned to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.he feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. The machine is supplied with an operator control panel. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase 50Hz. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure.Strand cooling with water, pellet cooling with water on a 200 mm x 7 meter long cooler, Dryer by Aero, Model 800, the Aero dryer is rated for 40 m3/hr. water with 30 kw motor and air throughput of 100 m3/min. Water from the dryer is returned to the process loop. and vibratory screener by Rieter.
More Details ⟶
no image found
Stock Number: #233811
Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic
Capacity (Design): 6,900 kg/h
Additional Information: Type: Underwater strand pelletizing system Components: Rieter M-USG 900 V cutter, strand transfer equipment, pellet cooler, and screener The cutter IPP Stock # 205765- Rieter (Maag), M-USG 900 V the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900.
Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile. The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. The machine is supplied with an operator control panel. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure. Strand cooling with water, pellet cooling with water on a 200 mm x 7 meter long cooler, Dryer by Aero, Model 800, the Aero dryer is rated for 40 m3/hr. water with 30 kw motor and air throughput of 100 m3/min. Water from the dryer is returned to the process loop. and vibratory screener by Rieter.
More Details ⟶
no image found
Stock Number: #233810
Stainless Steel 316 Rieter (Maag) M-USG 900 V Major Items Plastic
Capacity (Design): 6,900 kg/h
Additional Information: Type: Underwater strand pelletizing system Complete system includes the Rieter M-USG 900 V cutter. strand transfer equipment, pellet cooler and screener The cutter IPP Stock # 205766- Rieter (Maag) the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temperature 285-290 degrees C. at 200-500 Pas viscosity. 90 strands with a maximum through put of 6900. Die plate design (pn# 10295462) 5,5 mm hole diameter. With a quick change cutting head. The Cutter head diameter is 162.5 mm, 30 teeth, with a 2 degree helix angle and # 2 tooth profile.
The feed rolls are timed, with a belt drive, driven by a three phase AC motor, rated for 5.5 kW. The machine is supplied with an operator control panel. This system requires the following utilities: Compressed air-4-6 bar. (dry and oil free), Electrical-400 volt 3 phase. Cooling water, 30 m3/h at 30 degrees C at 6 bar maximum pressure. Strand cooling with water, pellet cooling with water on a 200 mm x 7 meter long cooler, Dryer by Aero, Model 800, the Aero dryer is rated for 40 m3/hr. water with 30 kw motor and air throughput of 100 m3/min. Water from the dryer is returned to the process loop. and vibratory screener by Rieter.
More Details ⟶
Request a Quote

Shop used, surplus, and secondhand plastic processing machinery from IPP – in stock and ready to ship for manufacturing and recycling applications

Optimize your plastic production with IPP’s ready-to-ship equipment for molding, extrusion, and material recovery

Used plastic processing equipment from IPP encompasses a wide range of machinery essential for the plastics industry. From injection molding machines and extruders to granulators and recycling systems, IPP offers equipment that meets the demands of various plastic manufacturing processes. With over 47 years of industry experience, IPP supplies used, surplus, and secondhand plastic processing equipment from 20 global plant sites and maintains a ready-to-ship inventory of 15,000+ process systems.

IPP stocks equipment from leading manufacturers such as KraussMaffei, Engel, Davis-Standard, and Conair, ensuring quality and reliability.

Applications and industries

  • In automotive manufacturing, for producing plastic components and assemblies
  • In packaging, for creating bottles, containers, and films
  • In consumer goods, for molding household items and electronics casings
  • In recycling, for reprocessing plastic waste into reusable materials

Types of materials processed

  • Thermoplastics like polyethylene (PE), polypropylene (PP), and polystyrene (PS)
  • Engineering plastics such as ABS, nylon, and polycarbonate
  • Recycled plastics for sustainable manufacturing
  • Composite materials combining plastics with other substrates

Common materials of construction

To ensure durability and compliance, plastic processing equipment is typically constructed from:

  • Hardened steel for components subjected to high pressure and wear
  • Stainless steel for corrosion resistance and hygiene in processing
  • Aluminum for lightweight structural elements
  • Chromed surfaces for reduced friction and easy cleaning

Key features of used plastic processing equipment

  • High-precision controls for consistent product quality
  • Energy-efficient designs to reduce operational costs
  • Modular components for easy maintenance and scalability
  • Advanced safety features to protect operators and equipment
  • Compatibility with various molds and dies for versatility

Discover how used plastic processing equipment can enhance your manufacturing efficiency at PlastiWin Capital Equipment.

Find your plastic processing equipment at IPP

Browse IPP inventory or contact IPP’s plastic equipment specialists to find the right used, surplus, or secondhand machinery for your operations. From individual machines to complete lines, IPP helps you achieve your production goals efficiently and cost-effectively.

As highlighted by EPCA, IPP is recognized as a global buyer and seller of process plants and equipment, serving industries including plastics, with a vast inventory and international presence.

FAQ

Plastic FAQ

Have questions about Plastics or our services? Learn more about our products and why customers choose IPP.

What types of plastic processing equipment are available from IPP?
IPP offers injection molding machines, extruders, blow molders, granulators, and recycling systems.
Can IPP assist with equipment installation and commissioning?
Yes – IPP provides support services to ensure proper setup and integration of equipment.
Are these machines inspected and ready for operation?
Most equipment is cleaned, inspected, and ready for immediate deployment.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP offers cost savings, reduced lead times, and extensive industry experience—backed by over 47 years of global support.