Diameter
Measure
Quote Cart
Used spray dryers for sale: efficient drying for liquids, emulsions and slurries
Highest-ranked available inventory for this selection.
No subtypes are available.
Select one or more values to narrow the current listings.
Use this setting to include or exclude equipment with this feature.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Use this setting to include or exclude equipment with this feature.
Showing 17 of 17 matching Spray Dryers.
Niro (Bowen Design) Spray Dryer With BB-3 Type Spray machine Conical Bottom drying chamber is 12' diameter x 6' 7" straight side, and utilize a co current air flow design. Elevation to top of dryer is 25' 7". This is a complete system with the spray dryer and bag house mounted out doors. Feed related equipment is mounted indoors on a skid. Dryer details are as follows: Supply air; 1385 acfm. Natural gas; 27.9 acfm. Feed; 1725 lbs/hr. Product 525 lbs/hr. Evaporation rate 1200 lbs./hr. Process gas inlet temp. = 1100 degrees F. BB-3 spray machine with complete controls including a Penthouse control panel, feed valve, automatic force oil lube system by Sloan Brothers, and Magnetek GPD 505 VSC variable motor speed system. Bag house is manufactured from 321 SS, rated for 400 degrees F, with an air volume of 1850 scfm, and air to cloth ratio of 3.9:1. Blower is CS, by New York blower, series 45, size 224 and rated for 3000 cfm at 3127 rpm. Other support equipment includes a 400 gallon, fiberglass mixing feed tank, and related pumps. Auto valves are by Fischer, instrumentation is by Rosemount.
Utility Model pilot size used for scale up work Rated for 20 lbs.hr with atomizing nozzle with conical bottom.
nozzle type spray dryer system with integrated fluid bed, directly heated with heat recovering, 45% DS feed, product is a micro Granulate, spray nozzle feed (unavailable)dryer directly heated by gas burner, bottom of the dryer has an integrated fluid bed with rotary lock valve,(1) 3.2 m3/hour stainless steel Feluwa feed pump, pressure 120 bar, (2) 21,000 liter stainless steel cyclones, manufactured by Niro, pressure 1 bar @ 120 degrees C, each with a rotary lock valve, (1) Stainless steel pre-cyclone, manufactured by Niro, pressure 1.01 bar @ 120 degrees C, with 2-rotary lock valves, (1) 54000 Nm3/hour stainless steel main blower/fan, manufactured by Niro, fabrik #F388334/1, pressure 1.03 bar @ 120 degrees C, driven by 170 kW, 1490 rpm motor,2) 0.8 m3/hr. twin screw coolers, manufactured by Engelmann, driven by 3kw motor, stainless steel fresh air blower, manufactured by Niro, driven by 7.5kw motor with air filter, (1) 13 square meter stainless steel heat exchanger, manufactured by Niro, pressure 1.04 bar @ 800/250 degrees C, (2) 105,000 liter Aluminum silos, manufactured by Buhler, 3m diameter, pressure 1.03 bar @ 20 degrees C, each with a dust filter mounted on top, (1) stainless steel wet scrubber system which includes (1) 50,000 liter stainless steel vertical Scrubber, pressure 1.03 bar @ 120/40 degrees C, 2.8m diameter, 90kw motor, (2) 78.2 square meter stainless steel plate heat exchangers, manufactured by GEA, pressure 3 bar @ 40/20 degrees C, (2) 265 m3/hour stainless steel centrifugal pumps, driven by 17.5kw motor, (1) 1500 liter vertical separator tank, manufactured by Niro, 2m diameter, pressure 1.03 bar @ 40 degrees C, and other ancillaries ,other ancillaries, dryer system also includes other minor ancillaries such as valves, flow meters etc.
multifunctional Spray dryer system with rotary atomization and baghouse filter. on Zinc Oxide, but can dry other inorganic compounds. This spray dryer is an all welded unit comprised of a chamber and cone with the following dimensions: 3.4m diameter x 4.8m straight side x 2.3m coned bottom, 700mm x 400mm access door. The chamber is equipped with pneumatic hammers for helping powder discharge. This spray dryer configuration has a 2 point discharge system. The rotary atomizer is a Niro type F15-GVWO-NPSS rotary atomizer, serial # 767, Drying gas is supplied by a Niro direct gas fired air heater with Maxon airflow burner type NP-35.5, fabrication # 471, liquid petroleum gas fired, 297 kw nominal load, gas supply pressure 8mbar (min), 21 mbar (max). Product/ drying gases are separated by a bag filter, a 31 square meter (339 square feet) Includes the following optional accessories: (1) Brass Hydra-cell spray pump, type G16XDTHFECA, serial # 142602, driven by 2.2/2.55 kw, 3/50/220-240/380-420/440-480 volt, 1420/1720 rpm motor. (1) 1700 liter 304 s/steel feed tank with feed pump, open top, weld coned bottom, 1.4m diameter x 1000mm straight side, Mono Merlin rotary feed pump, type SAB2241VN8, tank and pump mounted on (4) c/steel frame with legs. (1) 250 liter 304 s/steel feed tank with clamp on Lightnin agitator, open top, weld coned bottom, 1.2m diameter x 700mm straight side, Lightnin agitator model LP-75-VH, serial # Q54279, driven by 0.75 kw, 3/50/220/380/420 volt, 1400 rpm motor, tank mounted on (4) c/steel legs. (1) Gericke s/steel centrifugal sifter, type CSM-722-MK2, serial # CM2-7072, 600mm long x 330mm wide,(1) s/steel 3110 m3/hr. @ 160 degrees C fan, manufactured by B.Bille, type HT35-530, fan speed 2900 rpm, 11 kw, 2930 rpm motor. (1) Spiroflow screw conveyor, 60mm diameter x approximately 3m long plastic tube with s/steel screw, driven by 1.75 kw, 3/50/254/277/440 volt, 1115 rpm motor, (1) s/steel 1 ton tote bin, 1m x 1m x 1m deep,
multifunctional spray dryer system, with nozzle type atomization, and baghouse filter. on Zinc Oxide, but can dry other inorganic compounds. This spray dryer is an all welded unit comprised of a chamber and cone with the following dimensions: 3.4m diameter x 4.8m straight side x 2.3m coned bottom, 700mm x 400mm access door, chamber with pneumatic hammers for helping powder discharge, Drying gas is supplied by a Niro direct gas fired air heater with Maxon airflow burner type NP-35.5, fabrication # 472, liquid petroleum gas fired, 334 kw nominal load, gas supply pressure 8mbar (min), 21 mbar (max). Product/ drying gases are separated by a bag filter: a 31 square meter (339 square feet) The system also includes the following optional accessories. (1) s/steel centrifugal spray pump, manufactured by Pasilac, type K2-3805-185, serial # 137868, driven by an electric motor. (1) 1700 liter 304 s/steel feed tank with clamp on agitator, open top, weld coned bottom, 1.5m diameter x 1000mm straight side, air driven agitator, tank mounted on (4) carbon steel legs. (1)600mm diameter s/steel single deck vibratory sieve, type VSC600-1-SS, manufactured by Vibrodynamics, serial # 664P driven by 0.5 kw, 3/50/380/420 volt, 1440 rpm motor. (1) s/steel 3110 m3/hr @ 160 deg C fan, manufactured by B.Bille, type HT35-530, fan speed 2790 rpm, 11 kw, 2930 rpm motor. (1) Feluwa high pressure feed pump, type SGL-232/3-K50-M190-ZW, serial # 21/26322, 0.47 m3/hr., 1.5 kw, 1400 rpm.
76 kg/hr of powder Nominal evaporative capacity between 250-350 kgs/hr. exhaust 60-70 degrees C, (1) Niro FSD 0050-N 316 stainless steel spray dryer with internal fluid bed, type NVS-50 spray nozzle feed, chamber 3m diameter x 1.3m straight side x 2776mm high cone section, pneumatic hammers on side wall, 2- hinged inspection doors, gas disperser type DPS, (2) 316 stainless steel cyclones, 1 x 1.3m diameter x 3.1m high, 1 x 1.4m diameter x 5m high with hammers (1) direct gas fired supply air heater type NP 35.5, serial # 476, natural gas, nominal load 400 kw, pressure setting 34 bar (min), heater with Maxon airflo line burner type NP-III, size 35.5, (2) Maxon shut off valves, type 5000, size 1.1/4 (1) 0.540 m3/hr Feluwa piston feed pump, type ZGL-30/130-K63-2SM235HD, serial # 21/30824, 7.5 kw, 970 rpm, 1600 m head (max), belt driven 7.5 kw , 3/50/400 volt, 1000 rpm motor, (1) 7633 m3/hr exhaust fan, manufactured by B.Bille, type MT-800-250, order # 8635-N-4, air temperature 50 degrees C, belt driven by 37 kw, 3/50/415 volt, 2950 rpm motor, (1) kinpactor, (1) 1487 m3/hr filter bed fan, manufactured by B.Bille, type HT-25-530, serial # 8635-N-3, air temperature 30 degrees C, driven by 7.5 kw, 3/50/415 volt, 2890 rpm motor, (1) 4609 m3/hr supply air fan, manufactured by B.Bille, type MT-500-310, serial # 8635-N-2, air temperature 30 deg C, driven by 5.5 kw, 3/50/415 volt, 2900 rpm motor, (1) Aerzen roots compressor type blower, type GNA-10.0, 2800 rpm, driven by 3 kw, 3/50/415 volt, 2860 rpm motor, mounted in soudproof cabinet, (13 stainless steel rotary valves, 1 x Niro type DK200, driven by 0.55 kw, 220-240/320-415 volt, 1400 rpm motor, 2 x Niro type SST-208-BS-EX, 208mm diameter tapered rotor, explosion proof, driven by 0.37 kw, 220-240/320-415 volt, 900 rpm motor, (1) stainless steel centrifugal CIP pump, driven by 7.5 kw, 3/50/415 volt 2890 rpm motor (1) heater bank, type 400/240/3-VTI-191T46X23-D7, 3 bar @ 134 deg C, 3.5 liter volume (1) fibreglass scrubber tower, and other ducting, pipework & ancillaries,
belt driven no rotary atomiser disc
disc atomiser belt driven
spray head only 60 HP, 3/50/415 volt TEFC motor On trolley No rotor head Openings: 2-2" (50mm), 1-2 1/2" (62mm) with a carbon steel stand
driven by 60 HP, 3/50/415 rpm TEFC motor. On trolley.
rotary disc atomiser belt driven, with rotary disc
disc atomiser belt driven
disc atomiser belt driven
disc atomiser belt driven
disc atomiser belt driven
Spray dryers convert liquids into dry powders by atomizing the feed into a hot air stream, allowing for fast, controlled evaporation. Ideal for heat-sensitive products, spray dryers are used in a wide range of industries to ensure consistent particle size, solubility and purity. With over 47 years of experience, IPP supplies surplus, secondhand and used spray dryers from 20 complete process plant sites and an unmatched inventory of more than 15,000 ready-to-ship systems.
Spray dryers can be configured for co-current, counter-current or mixed-flow operation and often feature cyclones, bag filters or scrubbers for product recovery and emission control.
Spray dryers are built for cleanability, thermal resistance and corrosion protection:
Learn more about spray drying technology and applications from Chemical Engineering.
Search the IPP inventory or contact IPP’s team of experts to find a used, secondhand or surplus spray dryer that meets your specifications. From lab-scale systems to industrial towers, IPP helps you save time and money with ready-to-ship solutions.
Have questions about Spray Dryers or our services? Learn more about our products and why customers choose IPP.
