Quote
Quote Cart
clear all items
Equipment Search

New and Used Equipment

Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Netzsch
Clear all filters
Refine Results

Narrow these listings

Results 24 items found

Available equipment

Showing 24 of 24 matching equipment.

Featured
Stock Number: #213804
Carbon Steel Netzsch LMC 60CE Shot And Sand Mill
Capacity (Design): 0.06 m3
Diameter: 300 mm
Additional Information: Wet Grinding Media Mill water cooled grinding chamber Batch size 200 to 1000 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media 50 HP motor, 3/60/230/460 volt Class1 Groupd D
More Details ⟶
Stock Number: #219056
0.55 m3/h (2.4 GPM) Stainless Steel Austenitic Rotary Pump
Flow Rate: 2.4 GPM
Orientation: Horizontal
Powered By: Electric
Motor Power: 0.37 kW
Motor Speed (RPM): 1,375
Additional Information: 50 liter/hour - 550 liter/hour 3~/50Hz/500V/0,87A
More Details ⟶
Stock Number: #220429
2 m3/h (8.8 GPM) Stainless Steel Austenitic Rotary Pump
Flow Rate: 2 m3/h
Pressure: 12 bar
Orientation: Horizontal
Powered By: Electric
Motor Power: 1.73 kW
Motor Speed (RPM): 1,660
Additional Information: 2-stage rotary screw pump pump size 031 standard type, geometry and configuration pin joint design Motor: 462 rpm openings: (2) DN 50 PN16
More Details ⟶
Stock Number: #219171
Stainless Steel Other Rotary Pump
Flow Rate: 2 m3/h
Orientation: Horizontal
Powered By: Electric
Motor Power: 0.37 kW
Motor Speed (RPM): 1,435
Additional Information: • Variable speed drive brand: Stober • Variable speed drive model: RD11-1005-037-4 • Variable speed drive serial number: 1574907 • Motor type: Ex proof CE confirm.
More Details ⟶
Stock Number: #216258
Unused Stainless Steel Other Netzsch Shot And Sand Mill
Capacity (Design): 0.02 m3
Additional Information: lower vari drive assembly Fits 100 system only.
More Details ⟶
Stock Number: #213816
Carbon Steel Netzsch LME 20 Shot And Sand Mill
Capacity (Design): 0.02 m3
Diameter: 220 mm
Additional Information: Wet Grinding media mill water cooled grinding chamber Batch size 50 to 250 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media
More Details ⟶
Stock Number: #217924
Stainless Steel Other Netsch GN H6-3 Centrifugal Pump
Orientation: Horizontal
Powered By: Electric
Motor Power: 2 kW
Motor Speed (RPM): 1,440
Additional Information: • Motor type: D 2 3,0 / 4 • Openings: (2) 50 mm
More Details ⟶
Stock Number: #217575
Unused Stainless Steel Austenitic Rotary Pump
Orientation: Horizontal
Powered By: Electric
Motor Power: 5 kW
Motor Speed (RPM): 1,425
Additional Information: 290-500V/14,4A 2-80mm openings
More Details ⟶
Stock Number: #219175
Rotary Pump
Flow Rate: 2.4 m3/h
Pump Head: 3 m
Pressure: 2 bar
Orientation: Horizontal
Powered By: Electric
Motor Power: 1.1 kW
Motor Speed (RPM): 1,410
Temperature: 20 °C
Additional Information: 120-550 liter/h Pump seal: mechanical Motor type: DNGW-090LX-04C
More Details ⟶
Stock Number: #105429
Stainless Steel 304 Netzsch LME4DCMS Shot And Sand Mill
Diameter: 6 in
Drive Power: 5 HP
Additional Information: bead mill Type 574-04-21, Order #201869. Full load 14.7 amp. Currently set up as a disk agitator, but can also be used with a peg agitator.
Nylon coated concentric disc arrangement; nylon coated SS shaft. Has water cooled chamber w/1 HP Viking CS rotary pump Polished grinding chamber 6" dia x 18" long. On board explosion proof controls
More Details ⟶
Stock Number: #229419
Stainless Steel 316 Rotary Pump
Flow Rate: 10 m3/h
Pressure: 25 bar
Orientation: Horizontal
Powered By: Electric
Motor Power: 18.5 kW
Motor Speed (RPM): 1,470
Temperature: 120 °C
Additional Information: 3/50/400/690 volt
More Details ⟶
Stock Number: #104552
Stainless Steel 316 Shot And Sand Mill
Diameter: 408 mm
Additional Information: jacketed horizontal disc mill, designed for wet ginding With a jacketed grinding chamber V-belt through a Voith fluid coupling.
More Details ⟶
Stock Number: #221712
Polypropylene Netzsch Filter Press
Filtration Area: 61.2 m²
Pressure: 6 bar
Temperature: 118.4 °F
Cake Volume: 28.3 ft3
Filter Press Plate Type: Mixed Plate Pack
Number of Plates: 51
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 1,000 mm
Plate Height: 1,000 mm
Plate Shifter: Yes
Plates Recessed: Yes
Additional Information: Kom #740.213 (25) membrane plates, (24) recessed plates, (2) end plates, 20 mm deep recess, (4) corner 50mm discharge, 100mm center feed, cake thickness: 35 mm, single screw press mechanism driven by a hydraulic power pack driven by: 3~220V/380V 9,6A/5,5A 2,5kW, 1410rpm, EEx e II T1-T3, plate shifter, light curtain, (1) Netsch Nemo-4NE-30A rotary screw pumps, (2) plastic diaphragm pumps, (2) Polypropylene vertical tanks, 1.2m diameter x 1.4m high, weld flat top, weld sloped bottom, (1) Polypropylene vertical tank, 2.2m diameter x 1.6m high, weld flat top, weld sloped bottom, (1) main control panel Plates Shifted By: Automatic.
More Details ⟶
Stock Number: #217576
Stainless Steel 316 Rotary Pump
Flow Rate: 1 m3/h
Pressure: 6 bar
Orientation: Horizontal
Powered By: Electric
Motor Power: 0.75 kW
Motor Speed (RPM): 2,805
Additional Information: P=0,40kW, N=600 1/m by 600 rpm 15. Explosion proof rating: T3
More Details ⟶
Stock Number: #219102
Unused Stainless Steel 316L Rotary Pump
Flow Rate: 2 m3/h
Orientation: Horizontal
Powered By: Electric
Motor Power: 1.35 kW
Motor Speed (RPM): 1,415
Temperature: 60 °C
Additional Information: 2-65mm opnings
More Details ⟶
Stock Number: #217925
Carbon Steel Netsch H 4 Centrifugal Pump
Orientation: Horizontal
Powered By: Electric
Additional Information: Number of openings: 2 Opening size: 50 mm
More Details ⟶
Stock Number: #213812
0.02 m3 (0.71 ft3) Carbon Steel Shot And Sand Mill
Capacity (Design): 0.02 m3
Diameter: 220 mm
Additional Information: Wet Grinding media water cooled grinding chamber Batch size 50 to 250 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media
More Details ⟶
Stock Number: #213808
0.06 m3 (2.1 ft3) Carbon Steel Shot And Sand Mill
Capacity (Design): 0.06 m3
Diameter: 300 mm
Additional Information: Wet Grinding Media Mill water cooled grinding chamber, 60 liter total volume Batch size 200 to 1000 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media. motor : Class1 Groupd D
More Details ⟶
Stock Number: #213810
0.02 m3 (0.71 ft3) Carbon Steel Shot And Sand Mill
Capacity (Design): 0.02 m3
Diameter: 220 mm
Additional Information: water cooled grinding chamber, Batch size 50 to 250 liter capacity. closed design grinding chamber, axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media.
More Details ⟶
Stock Number: #213805
Carbon Steel Netzsch LMC 60CE Shot And Sand Mill
Capacity (Design): 0.06 m3
Diameter: 300 mm
Additional Information: Wet Grinding Media Mill water cooled grinding chamber Batch size 200 to 1000 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media Motor: 50 HP motor, 3/60/230/460 volt Class1 Groupd D
More Details ⟶
Stock Number: #213806
0.06 m3 (2.1 ft3) Carbon Steel Shot And Sand Mill
Capacity (Design): 0.06 m3
Diameter: 300 mm
Additional Information: Wet Grinding Media Mill 57 liter total volume. Batch size 200 to 1000 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media motor : Class1 Groupd D
More Details ⟶
Stock Number: #213807
Carbon Steel Netzsch LMC 60CE Shot And Sand Mill
Capacity (Design): 0.06 m3
Diameter: 300 mm
Additional Information: Wet Grinding Media Mill water cooled grinding chamber, 57 liter total volume. Batch size 200 to 1000 liter capacity. closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media. Unit driven by a motor, Class1 Groupd D
More Details ⟶
Stock Number: #213809
0.02 m3 (0.71 ft3) Carbon Steel Shot And Sand Mill
Capacity (Design): 0.02 m3
Diameter: 220 mm
Additional Information: Wet Grinding media mill water cooled grinding chamber 20 liter ginding chamber volume. Batch size 50 to 250 liter capacity. closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media
More Details ⟶
Stock Number: #213811
Carbon Steel Netzsch LME 20 Shot And Sand Mill
Capacity (Design): 0.02 m3
Diameter: 220 mm
Additional Information: Wet Grinding media mill water cooled grinding chamber Batch size 50 to 250 liter capacity closed design grinding chamber,axial flow. Mechanical Seal on shaft, with Teflon grinding discs for agitating the grinding media
More Details ⟶
Request a Quote