Carbon Steel Centrifugal Compressor 7,279 m3/h (4,284 CFM) For Sale - IPP# 212815

Type: Compressor

Subtype: Centrifugal

Manufacturer: Clark

Model: 2M8-6

Condition: Used

Material: Carbon Steel

Compressor Type: Rotary

Inlet Pressure: 0.97 bar (14.1 psi)

4,079 acfm rotary air compressor Direct driven by a steam turbine (IPP# 212810) through a gear reducer (IPP# 212811) Pressure Suction 14.07 6400 rpm critical speed 12"" inlet X 10"" discharge Nozzle orientation is up

Discharge Pressure: 33.8 bar (490 psi). Flow Rate: 6,930 m3/h (4,079 CFM). Inlet Diameter: 304.8 mm (12 in). Speed (RPM): 10,211.

Type: Compressor

Subtype: Centrifugal

Manufacturer: Clark

Model: 4M8-7

Condition: Used

Material: Carbon Steel

Compressor Type: Centrifugal

Inlet Pressure: 2 bar (29 psi)

11,763 ACFM with seven impellers inlet temperature is 24 degrees F. The average compressibility factor is 0.979. The nozzle orientation up The compressor rpm is 5,875 rpm, with a maximum speed of 6,220 rpm and a first critical speed of 3,000 rpm. Compressor HP is 1,574. Designed to be driven by a steam turbine (IPP# 212817) with a speed increaser (IPP # 212818).

Discharge Pressure: 4.1 bar (60 psi). Flow Rate: 19,985 m3/h (11,763 CFM). Speed (RPM): 6,220.

Type: Compressor

Subtype: Centrifugal

Manufacturer: Clark

Model: 2BF-7

Condition: Used

Material: Carbon Steel

Compressor Type: Centrifugal

Inlet Pressure: 62.4 bar (904.4 psi)

forged CS case with seven impellers Inlet pressure is 904.4 psia, inlet temperature is 100 degrees F Cooling water temperature is 85 degrees F and after intercooling is 100 degrees F The compressor rpm is 10,440, with a bhp of 7353 The first critical speed is 6,800 rpm This compressor has up connected intake and discharge flanges The suction nozzle is 10" and the discharge nozzle is 8" This compressor has three ring oil seals, and shares a lube oil system with other units in the train Originally driven by a steam turbine (not included).

Discharge Pressure: 125.1 bar (1,815 psi). Flow Rate: 2,666 m3/h (1,569 CFM). Inlet Diameter: 254 mm (10 in). Speed (RPM): 11,000.

Type: Compressor

Subtype: Centrifugal

Manufacturer: Clark

Model: 2BF7-5

Condition: Used

Material: Carbon Steel

Compressor Type: Centrifugal

Inlet Pressure: 123.8 bar (1,796 psi)

2016 cfm, recycle stage forged CS case with 5 impellers Average compressibility factor 1.078 Inlet temperature 90 degrees F. Average compressibility factor 1.078. Discharge pressure at compressor flange 2529.9, discharge temperature 128.3 degrees F Second stage( or recycle gas) Inlet pressure 2337.9 psia, Inlet temperature 63 degrees F. Average compressibility factor 1.036. Discharge pressure at compressor flange 2523.4, discharge temperature 77.7 degrees F. Up-connected intake and discharge flanges with compound nozzles located at 45% from the vertical centerline The suction nozzles are 10" and 10", the discharge nozzles are 8" and 10" compressor BHP is 3679 Continuous speed is 11,000 rpm, first critical speed is 6,400 rpm Originally part of a complete train that was driven by a steam turbine (not included). Uses a common lube oil system with the train. Compressor BHP: 3679

Discharge Pressure: 174.4 bar (2,530 psi). Flow Rate: 1,247 m3/h (734 CFM). Inlet Diameter: 254 mm (10 in). Speed (RPM): 11,000.