Stainless Steel 316 B Braun+Diessel Biotech GmbH 75 DS Batch-Type Agitated Reactor - IPP# 239306

Type: Reactor

Subtype: Batch-Type Agitated

Manufacturer: B Braun+Diessel Biotech GmbH

Model: 75 DS

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 76 L (20.1 gallons)

Internal Pressure: 3 bar (43.5 psi)

• Mirror polished Bio Reactor with conventional jacket. Vessel rated for -1 to +3 bar at 150 degrees C., Jacket rated for -1 to +3 bar at 150 degrees C. TUV stamped Motor CE certified Jacket volume is 10 liter.
• With six bottom side nozzles for electrodes. Equipped with Spray ball(s) for Clean in Place (CIP).
• Repolished 2009

Internal Full Vacuum: Yes. Internal Temperature: 150 °C (302 °F). Sanitary Construction: Yes. Jacket Pressure: 3 bar (43.5 psi). Jacket Temperature: 150 °C (302 °F). Orientation: Vertical. Agitation: Yes. Diameter: 460 mm (18.1 in). Straight Side Length: 700 mm (27.6 in). CIP: Yes. Support Type: Legs.

Type: Reactor

Subtype: Batch-Type Agitated

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 227 L (60 gallons)

Agitation: Yes

motor 3/50/400 volt

Diameter: 600 mm (23.6 in). Straight Side Length: 710 mm (28 in). Support Type: Lugs.

Type: Reactor

Subtype: Batch-Type Agitated

Manufacturer: Johnson's Ltd

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 908 L (239.9 gallons)

Internal Pressure: 2.8 bar (40 psi)

Flange mounted Arton PVW mixer Mechanical seal on shaft motor 3/50/400/440 volt

Internal Full Vacuum: Yes. Internal Temperature: 260 °C (500 °F). Jacket Pressure: 4.3 bar (63 psi). Jacket Temperature: 260 °C (500 °F). Jacket Material of Construction: Carbon Steel. Diameter: 1,100 mm (43.9 in). Straight Side Length: 837 mm (33 in). Support Type: Lugs.

Type: Reactor

Subtype: Batch-Type Agitated

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 10,550 L (2,800 gallons)

Internal Pressure: 3.4 bar (50 psi)

Working capacity: 6000 liters (57% full) (2) 6 blade pitched paddles on shaft, Curtis mixer agitator drive, serial # LCM723, double mechanical seal with lubricator, (4) 316 stainless steel internal coils giving total heating surface area of 18.1 square meter, inner coil 50mm diameter x 7-vertical turns, heating surface 3.91 square meter, centre coil 50mm diameter x 7-vertical turns, heating/cooling surface 5.24 square meter, outer coil 50mm diameter x 7-vertical turns, heating surface 6.22 square meter, base coil 50mm diameter x 3-horizontal turns, heating surface 2.73 square meter. (3) 316 stainless steel internal baffles on sidewall, (1) 25mm diameter sparge pipe fitted on top nozzle. bottom outlet with hydraulic discharge valve, driven by compressed air, with air reciever, Design code BS1515 Pt.2.

Internal Temperature: 300 °C (572 °F). Jacket Pressure: 5.2 bar (75 psi). Jacket Temperature: 300 °C (572 °F). Jacket Material of Construction: Stainless Steel 316. Agitation: Yes. Diameter: 1,950 mm (76.5 in). Straight Side Length: 3,000 mm (117.3 in).