Quote Cart
Type: Still
Manufacturer: Steris Finn-Aqua
Model: 3000-G
Condition: Used
Material: Stainless Steel 316
Controls: Yes
Support Type: Skid
4700 lbs/hr
Pure Steam Generator
Falling film design to remove pyrogenic material
Steam heated.
Electricals rated 3.0 kW, 480 volt, 60 cyc, 5.2 amp with 0.5 kW 120 volt 4.2 amp, 60 cyc controls.
All product surfaces are sanitary 316SS construction. Skid
with process controls in a SS control cabinet
Sesigned to consistenly generat Pure Steam for usin in Pharma and biotec industries.
Orientation: Vertical.
Type: Still
Manufacturer: Steris Finn-Aqua
Model: 1500-H-5
Condition: Used
Material: Stainless Steel Austenitic
Diameter: 300 mm (11.8 in)
Length: 2.7 m (8.7 ft)
multi-effect WFI stills system the Finn Aqua Multiple Effect Water Stills uses an enhanced falling film evaporation technology that removes impurities at high velocities, delivering the highest quality water for injection. the Multiple Effect Water Still uses a staged evaporation and condensation process to produce water for injection. Plant steam is applied only to the first column evaporator (effect) with the subsequent columns using the steam produced in the previous column as the source of energy. Similarly, cooling water is applied only at the condenser to condense pure steam into water for injection. The columns subsequent to the first column use feed water as the cooling source, which is evaporated, as the pure steam from the preceding column is condensed producing water for injection. Produced distillate and remaining pure steam is condensed in the condenser and flowing further to the plant’s water for injection tank. system consists of (5) ) 316L stainless steel (1.4404/1.4571) vertical heat exchangers, pressure 8 bar @ 175 deg C (9.7ltr), (1) 200ltr 316L stainless steel (1.4404/1.4571) tube, head and shell horizontal condenser, pressure 2 bar @ 133 deg C, driven by a 3 kW 2900 rpm motor, (5) stainless steel Pall Filters, (1) 2500 liter 316L stainless steel (1.4571 ) vertical pressure tank with half pipe coil, pressure -1/6 bar @ 200 deg C, 1.8m diameter x 1.5m straight side,
Pressure: 8 bar (116 psi). Temperature: 175 °C (347 °F). Column: Yes. Multi Effect: Yes.
Type: Still
Manufacturer: OY Santaslo
Model: 6-350
Condition: Used
Material: Stainless Steel 316
Diameter: 420 mm (16.5 in)
Length: 0.35 m (1.15 ft)
45 liter water still system distillate outlet temperature 70 degree C (158 degree F), steam is condensed into distillate by cold cooling water, slow steam speed with special baffle produces high distillate quality even from soft water, ventilation system to remove gasses from the steam, excess salts limited by adjustable bleed valve. System consists of (1) 45 liter 316L stainless steel boiler tank, 420mm diameter x 350mm straight side, with 9.5 KW, 220/380 volt Loval immersion type heating element, element mounted on bottom of tank. (1) 75 liter 316L stainless steel condenser tank with 12mm diameter cooling spiral, internal baffle. This tank mounts on top of boiler tank. Openings: distillate 1-20mm, 1-12mm cooling water feed, 1-12mm cooling water outlet. (1) 316L stainless steel rectangular regulating tank. 625mm long x 325mm wide x 200mm deep with magnetic float/level switch, Type 862D-F40, 240/440 volt, 70 watt. (1) 480 liter 316L stainless steel vertical pressure tank. Manufactured by Olsa, Serial #1237. Rated 1 bar @ 120 degree C. 800mm diameter x 1000mm straight side, welded dished top and bottom. (4) turns on coil, (3) 75mm diameter x 700mm long stainless steel tubes for heater elements mounted on bottom of straight side (no heating elements). Openings: top 1-180mm, 3-20mm (1 with probe and sensor, 1 with pressure gauge), 1-12mm; coil 2-20mm; bottom 1-50mm.
Still Type: Column Still. Pressure: 1.01 bar (14.7 psi). Temperature: 100 °C (212 °F). Column: Yes. Orientation: Vertical.
Type: Still
Manufacturer: Distillation Engineering Co.
Condition: Used
Material: Stainless Steel 316
Diameter: 304.8 mm (12 in)
Length: 2 m (6.7 ft)
with out a still pot. Needs a 750-1000 gallon reactor to complete (sold separate) Designed to bolt onto the top of a reactor with a 750-1000 gallon capacity. (depending on the chemical service) The system consists of the following parts First a 12" x 80" SS packed column, second a top mounted re-boiler, and third a reflux tank. The column section is 12" diameter x 80" overall length. 316 SS, NB # 205, rated for FV/125 psi at 500 degrees F. Manufactured by Roben. With a packing support 10" from the bottom of the column. Estimated packed capacity is 5 ft.3. The U-Tube condenser is top mounted to the column. It is 150 ft.2, The shell is 316 SS. NB # 4892. The shell is rated for FV/150 psi at 450 degrees F The tubes are rated for 100 psi at 450 degrees F. It is manufactured by Roben, serial # 81034. It is 18" diameter x 107" overall length. Two pass tube side. With 2" tube nozzles. The reflux/receiver tank has a 60 Gallon capacity and is manufactured from 316 SS material. It is orientated vertically. The dimensions of the vessel are 24" diameter x30" straight side,
Still Type: Column Still. Pressure: 8.6 bar (125 psi). Temperature: 260 °C (500 °F). Column: Yes. Orientation: Vertical.