Quote
Quote Cart
clear all items
All Equipment Evaporators Wiped/Thin Film

Evaporator Inventory - Search Wiped/Thin Film Evaporators | IPP

Used evaporators for sale: efficient separation for solvent recovery and product concentration

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Buss-SMS-Canzler GmbH
Evaporator
Subtype: Wiped/Thin Film
Clear all filters
Featured

Top Wiped/Thin Film in stock

Highest-ranked available inventory for this selection.

Browse

Compare related Evaporator types

Subtypes
All Evaporators Crystalizer/Evaporator Flash Rising/Falling Film Wiped/Thin Film
Refine Results

Refine Wiped/Thin Film

Specifications
Results 6 items found

Available Wiped/Thin Film

Showing 6 of 6 matching Wiped/Thin Film.

Stock Number: #211713
Stainless Steel 316 Wiped/Thin Film Evaporator
Total Heat Transfer Surface Area: 6.5 m²
Diameter: 900 mm
Height: 4,700 mm
Pressure: 5 bar
Temperature: 250 °C
Internal Condenser: Yes
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: Brown Boveri eQU 112 MB4
Additional Information: Short Path wiped film evaporator system with internal condensor includes SS seperator tank Rated 2000 liter 95 liter in the jacket. Top mounted rotor drive with a 3.7 kw, 50 Hz gear motor with mechanical seal on rotor, Graphite wipers on rotor. Evaporator has a side bottom discharge for product. Vessel weight empty, 2600 kg; motor and rotor 800 kg.
More Details ⟶
Stock Number: #211714
158.8 kg/h (350 lb/h) Stainless Steel 316 Wiped/Thin Film Evaporator
Evaporation Rate: 350 lb/h
Total Heat Transfer Surface Area: 6.5 m²
Orientation: Vertical
Diameter: 900 mm
Height: 4,700 mm
Pressure: 5 bar
Temperature: 250 °C
Internal Condenser: Yes
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: Brown Boveri EQU112 MB4
Additional Information: Short Path wiped film evaporator system with internal condensrr includes SS seperator tank Rated 2000 liter 95 liter in the jacket. Top mounted rotor drive with a 3.7 kw, 50 Hz gear motor with mechanical seal on rotor, graphite wiper on rotor. Evaporator has a side bottom discharge for product. Vessel weight empty, 2600 kg; motor and rotor 800 kg.
More Details ⟶
Stock Number: #219255
47.6 kg/h (105 lb/h) Stainless Steel 316 Wiped/Thin Film Evaporator
Evaporation Rate: 105 lb/h
Total Heat Transfer Surface Area: 2 m²
Orientation: Vertical
Height: 2,100 mm
Pressure: 0.5 bar
Temperature: 185 °C
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: MarelliMotori D5X 160 MA8 B3
Additional Information: wiped film evaporator with carbon steel jacket jackets 10 bar @ 185 deg C, carbon steel jackets on straight side rotor speed 210 rpm, wiper blades with teflon lining, double mech seal on shaft heated length 2120mm wiper blades with teflon lining, double mech seal on shaft rotor belt driven by 3.5 KW, 3/50/380 volt, 750 rpm, IP 44, Exe G3 motor
More Details ⟶
Stock Number: #211618
Stainless Steel 316 Wiped/Thin Film Evaporator
Total Heat Transfer Surface Area: 3.5 m²
Orientation: Vertical
Diameter: 450 mm
Height: 4,250 mm
Pressure: 16 bar
Temperature: 200 °C
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Drive Type: Eberhard Bauer DF 2A43HZ/309
Additional Information: wiped thin film evaporator with external condensor and seperator tank rated 440 liter With top mounted 3.7 KW, 50 Hz gear motor, mechanical seal on rotor, (4) blade rotor with wipers With 2 SqM external 1.4435 SS spiral coil condenser, manufactured by Zurcher, Serial number 630, rated -1/2 bar @ -20 to 200 degrees C in vessel; -1/6 bar @ -20 to 200 degrees C in the coil. Vessel is 419mm diameter x 936mm tangent to tangent, with bolted dished top, dished bottom, and (2) bank of internal spiral condensing coil. Coil and tank are 1.4435 SS.
More Details ⟶
Stock Number: #206245
Stainless Steel 316 Wiped/Thin Film Evaporator
Total Heat Transfer Surface Area: 150 ft²
Temperature: 650 °F
Vacuum: Yes
Additional Information: 4' of shell is 316SS lined and the rest of the shell Hastelloy C lined Hastelloy C shell, CS Jacket. Dual rated jacket 200 PSIG @ 400 degrees F or 100 PSIG @ 650 degrees F. With 20 HP, 900 RPM, 3/60/230/460 Volt motor.
More Details ⟶
Stock Number: #211715
Stainless Steel 316 Wiped/Thin Film Evaporator
Total Heat Transfer Surface Area: 3.5 m²
Orientation: Vertical
Diameter: 450 mm
Height: 4,250 mm
Pressure: 16 bar
Temperature: 200 °C
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Additional Information: wiped thin film evaporator system Rotafilm straight side made up of (2) 1354mm long bolted sections, c/steel jackets on straight side and bottom cone, rotor direct driven by 3.6 kw, 3/50/380 volt, 1450 rpm gear motor, mechanical seal on rotor, (4) blade rotor with wipers evaporator mounted lugs. system includes (1) 2 Sqm 1.4435 s/steel coil condenser, fabrik #645, shell pressure -1/2 bar @ -20/200 deg C, coil -1/6 bar @ -20/200 degs C, 419mm diameter x 936mm tangent to tangent shell, bolted dished top,weld dished bottom, (2) banks of internal spiral condensing coil. mounted on lugs, (1) 88ltr 1.4435 s/steel vertical separator tank with internal coil, fabrik #646, internal pressure -1/6 bar @ -30/300 deg C, coil -1/13 bar @ -30/200 deg C (4ltr), 280mm diameter x1m straight side
More Details ⟶
Request a Quote

Browse used, surplus and secondhand evaporators from IPP – in stock and optimized for chemical, pharma and food processing

Save time and money with IPP’s ready-to-ship evaporators for distillation, purification and thermal separation

Used evaporators are thermal separation systems that concentrate solutions, recover solvents, or reduce waste volume by vaporizing liquid components. These systems are essential across industries where product purity, yield, and cost-efficiency matter. With more than 47 years of industry expertise, IPP offers used, secondhand and surplus evaporators from 20 complete plant sites and a massive inventory of over 15,000 systems ready to ship.

Evaporators are available in multiple configurations—falling film, rising film, forced circulation, wiped film and multiple-effect systems—each tailored for specific viscosity, temperature sensitivity and throughput needs.

Primary uses across industries

  • In pharmaceuticals, evaporators concentrate APIs and remove solvents during intermediate processing
  • In chemical manufacturing, they purify products and reclaim valuable solvents from process streams
  • In food and beverage, they concentrate juices, dairy products, extracts and syrups
  • In wastewater treatment, they reduce volume and recover reusable components

Types of materials processed

  • Heat-sensitive or solvent-based mixtures
  • Aqueous solutions, organic solvents and slurries
  • Viscous liquids and high-solid content mixtures

Common materials of construction

Evaporators are built for long service life, cleanability and chemical resistance:

  • Stainless steel for sanitary and corrosion-resistant applications
  • Hastelloy and other alloys for aggressive chemicals
  • Glass-lined steel for ultra-pure or reactive materials

Key features of industrial evaporators

  • Available as single-effect or multi-effect systems for energy efficiency
  • Options for vacuum operation to protect heat-sensitive materials
  • Integration with distillation, crystallization or solvent recovery units
  • Configurable heating sources: steam, hot oil, or electric
  • Designed for clean-in-place (CIP) and automated control systems

Learn more about evaporator types and applications in process industries from Chemical Engineering.

Find your evaporator at IPP

Search the IPP inventory or contact IPP’s equipment experts to locate the ideal used, secondhand or surplus evaporator for your facility. Whether for concentration, recovery or purification, IPP helps you save time and money with precision systems ready to ship.

FAQ

Evaporator FAQ

Have questions about Evaporators or our services? Learn more about our products and why customers choose IPP.

What’s the difference between falling film and forced circulation evaporators?
Falling film evaporators are ideal for heat-sensitive materials and lower viscosities, while forced circulation systems handle higher solids and fouling-prone feeds.
Can used evaporators be modified for new applications?
Yes – many units can be reconfigured with new instrumentation, controls or materials of construction to meet changing process needs.
Are multi-effect evaporators more energy efficient?
Absolutely – they reuse vapor from one stage to heat the next, reducing overall steam consumption and operational costs.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP provides faster lead times, cost savings and global support from a team with 47+ years of process plant experience.