Spray Dryers - Used and Surplus Inventory | IPP

Additional Information: System consists of: (1) Tetre 304 stainless steel spray dryer, spray nozzle feed, evaporation 100-160 kg/hr@ 160-195 deg C, 2.5m diameter x 8.5m straight side x 3m high cone section, 2 x hinged inspection doors, mounted on carbon steel mounting ring, (1) Maxon gas fired burner, serial # 600200332-03, 50 HZ, 110 volt, heat value 10 kwh/nm3, inlet pressure 100 mbar @ 150 degrees c, min heat input (HHV) 18 kw, max heat input (HHV) 600 kw, duct pressure -1 bar, (1) stainless steel cyclones, (1) rotary valve (1) 2.22 m3/sec exhaust fan, manufactured by Pollrich, type S38031RWIII, 2720 -2800 rpm max, 280 degrees C (max) (1) kinpactor, manufactured by AAF International ltd, (1) stainless steel vane demister , manufactured by AAF International ltd, type Vane-pak, size DF-100, serial # AP03980, (1) 500mm diameter stainless steel single deck vibratory compact sieve, model 17240, manufactured by Russell Finex, serial # DF1854, 500mm diameter x 60mm deep deck with top cover, vibratory motor type MVS1-3/500-890, rated 0.45 kw, 3/50/220-240/380-415 volt, 3000 rpm (1) 2.1 cubic feet (0.06 cubic meter, 60 liter) stainless steel ribbon blender. manufactured by Hosokawa, type HMC-60, serial # 648010100, rated 3 kw, ribbon speed 158 rpm (max), interrupted ribbon design, trough 1.2m long x 300mm wide x 350mm deep, driven by 3 kw, 3/50/380/415 volt, motor via gearbox, hinged top cover, (1) control Panel

More Details ⟶

Stock Number: #706106

Stainless Steel 304 Tetre Type 150 Dryer-Spray

Diameter: 2,500 mm

Atomizer Type: Single Fluid Pressure Nozzle

Evaporation Rate: 160 kg/h

Inlet Temperature: 383 °F

Air Flow Rate: 4,700 CFM

Heating Type: Gas

Explosion-Shock Resistant: Yes

Height: 12,500 mm

Additional Information: System consists of: (1) Tetre 304 stainless steel spray dryer, spray nozzle feed, evaporation 100-160 kg/hr@ 160-195 deg C, 2.5m diameter x 8.5m straight side x 3m high cone section, 2 x hinged inspection doors, mounted on carbon steel mounting ring, (1) Maxon gas fired burner, serial # 600200332-02, 50 HZ, 110 volt, heat value 10 kwh/nm3, inlet pressure 100 mbar @ 150 degrees C, min heat input (HHV) 18 kw, max heat input (HHV) 600 kw, duct pressure -1 bar, (1) stainless steel cyclones, (1) rotary valve (1) 2.22 m3/sec exhaust fan, manufactured by Pollrich, type S380331RWIII, serial # 33311/37468, 2720 -2800 rpm max, 280 degrees C (max), (1) stainless steel vane demister , manufactured by AAF International ltd, type Vane-pak, size DF-100, serial # AP03980, (1) 500mm diameter stainless steel single deck vibratory compact sieve, model 17240-LD.EP, manufactured by Russell Finex, serial # DF1510, 500mm diameter x 60mm deep deck with top cover, vibratory motor type MVS1-157550, rated 0.3 kw (input), 0.22 kw (output), 3/50/220-240/380-415 volt, 1500 rpm, (1) 1.75 cubic feet (0.05 cubic meter, 50 liter) stainless steel ribbon blender. manufactured by Winkworth, type UT50/C, serial # 16664, interrupted ribbon design, trough 1.2m long x 300mm wide x 350mm deep, driven by 3 kw, 3/50/415 volt, 1400/92 rpm motor via gearbox, hinged top cover, (1) control Panel

More Details ⟶

Stock Number: #706104

2,500 mm (98.4 in) Stainless Steel 304 Dryer-Spray

Diameter: 2,500 mm

Atomizer Type: Single Fluid Pressure Nozzle

Evaporation Rate: 160 kg/h

Inlet Temperature: 383 °F

Air Flow Rate: 4,700 CFM

Heating Type: Gas

Explosion-Shock Resistant: Yes

Height: 492.1 in

Additional Information: (1) Tetre 304 stainless steel spray dryer, spray nozzle feed, evaporation 100-160 kg/hr @ 160-195 degrees C, 2.5m diameter x 8.5m straight side x 3m high cone section, 2 x hinged inspection doors, mounted on c/steel mounting ring, (1) Maxon gas fired burner, serial # 600200332-01, 50 HZ, 110 volt, heat value 10 kwh/nm3, inlet pressure 100 mbar @ 150 degrees C, min heat input (HHV) 18 kw, max heat input (HHV) 600 kw, duct pressure -1 bar, (1) rotary valve (1) 2.22 m3/sec (4,703 CFM) exhaust fan, manufactured by Pollrich, type S38031RWIII, 2720 -2800 rpm max, 280 degrees C (max) (1) stainless steel vane demister , manufactured by AAF International ltd, type Vane-pak, size DF-100, serial # AP03980, (1) 500mm diameter stainless steel single deck vibratory compact sieve, model 17240, manufactured by Russell Finex, serial # DF1853, 500mm diameter x 60mm deep deck with top cover, vibratory motor type MVS1-157550, rated 0.3 kw (input), 0.22 kw (output), 3/50/220-240/380-415 volt, 1500 rpm, (1) 2.1 cubic feet (0.06 cubic meter, 60 liter) stainless steel ribbon blender. manufactured by Hosokawa, type HMC-60, serial # 6057901000, rated 3 kw, ribbon speed 158 rpm (max), interrupted ribbon design, trough 1.2m long x 300mm wide x 350mm deep, driven by 3 kw, 3/50/380/415 volt, motor via gearbox, hinged top cover, (1) control Panel

More Details ⟶

Request a Quote

Shop used, surplus and secondhand spray dryers from IPP – in stock and optimized for fine powders and rapid moisture removal

For food, pharma and chemical operations, IPP’s ready-to-ship spray dryers help you save time and money with scalable, high-performance systems

Spray dryers convert liquids into dry powders by atomizing the feed into a hot air stream, allowing for fast, controlled evaporation. Ideal for heat-sensitive products, spray dryers are used in a wide range of industries to ensure consistent particle size, solubility and purity. With over 47 years of experience, IPP supplies surplus, secondhand and used spray dryers from 20 complete process plant sites and an unmatched inventory of more than 15,000 ready-to-ship systems.

Spray dryers can be configured for co-current, counter-current or mixed-flow operation and often feature cyclones, bag filters or scrubbers for product recovery and emission control.

Primary uses across industries

In pharmaceuticals and biotech, they dry active ingredients, enzymes, and injectables
In food and dairy, they process milk powders, proteins, flavors and instant beverages
In chemical manufacturing, they dry pigments, polymers, detergents and fine resins
In ceramics and materials science, they produce powders for advanced manufacturing

Types of materials processed

Liquid slurries and emulsions
Heat-sensitive solutions requiring fast drying
Products requiring controlled particle size and powder consistency

Common materials of construction

Spray dryers are built for cleanability, thermal resistance and corrosion protection:

Stainless steel for food, pharma and chemical processing
Hastelloy or specialty alloys for corrosive or reactive feeds
Sanitary finishes for cGMP environments and FDA compliance

Key features of spray dryers

Atomization for rapid surface drying
Adjustable inlet/outlet temperatures for thermal control
Multiple recovery systems (cyclones, bag filters, scrubbers)
Ideal for scale-up from pilot to production
Uniform particle size and high product yield

Learn more about spray drying technology and applications from Chemical Engineering.

Find your spray dryer at IPP

Search the IPP inventory or contact IPP’s team of experts to find a used, secondhand or surplus spray dryer that meets your specifications. From lab-scale systems to industrial towers, IPP helps you save time and money with ready-to-ship solutions.

FAQ

Dryer-Spray FAQ

Have questions about Spray Dryers or our services? Learn more about our products and why customers choose IPP.

What types of products are ideal for spray drying?

Liquids, slurries and emulsions that need to be converted to fine powders, such as milk, APIs, pigments and proteins.

How is a spray dryer different from other dryers?

Spray dryers atomize the feed and expose it to hot air instantly, making them faster and more suitable for liquids than rotary or tray dryers.

What are key maintenance areas for spray dryers?

Inspect atomizers, heat exchangers, exhaust filters and product recovery systems regularly for optimal performance and cleanliness.

What are the benefits of buying used or secondhand process equipment from IPP?

You get faster delivery, lower capital costs, and expert guidance backed by 47+ years of experience in global process equipment solutions.

Spray Dryers - Used and Surplus Inventory | IPP

Top Spray Dryers in stock

Viewing Dryer-Spray

Narrow these listings

Available Spray Dryers

Shop used, surplus and secondhand spray dryers from IPP – in stock and optimized for fine powders and rapid moisture removal

For food, pharma and chemical operations, IPP’s ready-to-ship spray dryers help you save time and money with scalable, high-performance systems

Primary uses across industries

Types of materials processed

Common materials of construction

Key features of spray dryers

Find your spray dryer at IPP

Dryer-Spray FAQ