Quote
Quote Cart
clear all items
Equipment Search

New and Used Equipment

Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Baker Perkins
Clear all filters
Refine Results

Narrow these listings

Results 21 items found

Available equipment

Showing 21 of 21 matching equipment.

Featured
Stock Number: #103822
Mixer-Double Arm Baker Perkins M85SL Stainless Steel 304
Capacity (Design): 225 gallons
Capacity (Working): 150 gallons
Jacket Material: Carbon Steel
Blade Type: Cored dispersion
Blade Speed (RPM): 42
Tilting: Yes
Hydraulics: Yes
Additional Information: Size 16 Trough dimensions 31" x 49" x 47" deep, hinged cover w/counter balance, w/cored dispersion type mixing blades. Packing gland on shafts Shafts geared both ends and driven by Pacemaker 200/100 HP, 3/60/460 volt, 1770/885 rpm motor, Frame #449T, w/gear reducer. Output rpm on front blade 42/21, rear blade 25/125 driven by 5 HP motor.
More Details ⟶
Stock Number: #246884
Stainless Steel 316 Baker Perkins Ter Meer Centrifuge-Pusher
Basket Diameter: 12 in
Basket Depth: 11 in
Filtration Area: 2.7 ft²
Speed-RPM Maximum: 2,500
Controls: Yes
Number of Basket Stages: 1
Additional Information: Order # M-81852
More Details ⟶
Stock Number: #211052
Stainless Steel 316 Baker Perkins D18 Centrifuge-Misc. & Hydraulic
Motor Power: 15 HP
Description: 39" OAL x 36" OD Bowl, 250psi @ 250° F, with 1800rpm dual rotation fluid drive
Overall Length: 96 in
Overall Width: 96 in
Overall Height: 64 in
Is Podbielniak: Yes
Additional Information: Liquid/Liquid contactor Contract # M-91073 Seal rated 250 PSI @ 250 degrees F Bowl is 39" OAL x 36" OD Unit has 316SS bowl, 304SS top cover, and CS bottom housing with a coating Motor: Marathon Electric 230/460 volt with an American Davison Fluid drive is by model # ID05786092 rated for 1800 rpm, dual rotation
More Details ⟶
Stock Number: #212416
757 L (200 gallons) Carbon Steel Mixer-Double Arm
Capacity (Design): 200 gallons
Capacity (Working): 100 gallons
Blade Type: tangential sigma blades
Tilting: Yes
Additional Information: Sigma Blade Mixer jacket trough, tilt discharge packing glands on shaft, rated atmospheric internal, with dust cover With chain and sprocket drive on one end Unit has a seperate power pack for tilt discharge
More Details ⟶
Stock Number: #79720
Baker Perkins S-32 Parts Only Centrifuge-Pusher
Additional Information: pusher centrifuge parts Screens for basket and shaft
More Details ⟶
Stock Number: #212414
568 L (150 gallons) Carbon Steel Mixer-Double Arm
Capacity (Design): 150 gallons
Capacity (Working): 100 gallons
Jacket Pressure: 125 psi
Jacket Temperature: 400 °F
Blade Type: tangential sigma blades
Tilting: Yes
Additional Information: Sigma Blade Mixer jacket trough, tilt discharge. packing glands on shaft, rated atmospheric internal, with dust cover Geared both sides, driven through a jack shaft, with chain and sprocket drive on one end Unit has a seperate power pack for tilt discharge.
More Details ⟶
Stock Number: #211055
11.2 kW (15 HP) Stainless Steel 316 Centrifuge-Misc. & Hydraulic
Motor Power: 15 HP
Description: 39" OAL x 36" OD Bowl, 250psi @ 250° F, with 1800rpm dual rotation fluid drive
Overall Length: 96 in
Overall Width: 96 in
Overall Height: 64 in
Is Podbielniak: Yes
Additional Information: Liquid/Liquid contactor Contract # M-92582 Seal rated 250 PSI @ 250 degrees F Bowl is 39" OAL x 36" OD 304SS top cover, and CS bottom housing with a coating Motor: 230/460 volt with an American Davison Fluid drive is by, model # ID05786092 Fluid drive is by, model # ID05786092, rated for 1800 rpm, dual rotation
More Details ⟶
Stock Number: #202136
3,300 L (875 gallons) Carbon Steel Mixer-Double Arm
Capacity (Design): 875 gallons
Capacity (Working): 500 gallons
Jacket Pressure: 125 psi
Blade Type: double arm (Sigma Blades)
Blade Speed (RPM): 25.5
Tilting: Yes
Hydraulics: Yes
Additional Information: size 20 TUEM jacketed,no cover with unit Bowl tilting time 35 seconds. Mixing trough 58.5" . Front blade output speed 25.5 RPM. Rear blade output speed 14.5 RPM. Mixing arms V belt driven Main drive equipped with auxilliary motor with 45 seconds to start. Base is 16'7" long x 9' 11" wide.
More Details ⟶
Stock Number: #212413
568 L (150 gallons) Carbon Steel Mixer-Double Arm
Capacity (Design): 150 gallons
Capacity (Working): 100 gallons
Jacket Pressure: 125 psi
Jacket Temperature: 400 °F
Blade Type: tangential sigma blades
Tilting: Yes
Additional Information: Sigma Blade Mixer jacket trough, tilt discharge. With tangential sigma blades, packing glands on shaft, rated atmospheric internal, with dust cover. Geared both sides, driven through a jack shaft, with chain and sprocket drive on one end Unit has a seperate power pack for tilt discharge.
More Details ⟶
Stock Number: #92820
Stainless Steel 304 Mixer-Continuous
Motor Power: 75 HP
Diameter: 8 in
Length: 120 in
Orientation: Horizontal
Pressure: 100 psi
Temperature: 650 °F
Jacketed: Yes
Additional Information: ko-kneader. 8" dia x 10' long kneading chamber. Cored shaft.
More Details ⟶
Stock Number: #92819
55.9 kW (75 HP) Stainless Steel 304 Mixer-Continuous
Motor Power: 75 HP
Diameter: 8 in
Length: 120 in
Pressure: 100 psi
Temperature: 650 °F
Jacketed: Yes
Additional Information: ko-kneader kneading chamber. Cored shaft, jkt chamber
More Details ⟶
Stock Number: #94654
Baker Perkins Ko-Neader Mixer-Continuous
Motor Power: 75 HP
Diameter: 8 in
Length: 120 in
Orientation: Horizontal
Pressure: 100 psi
Temperature: 650 °F
Jacketed: Yes
Additional Information: Cored shaft, jacket chamber. No motor available.
More Details ⟶
Stock Number: #212411
Carbon Steel Mixer-Double Arm
Capacity (Design): 450 gallons
Capacity (Working): 300 gallons
Blade Type: Sigma Blade
Tilting: Yes
Hydraulics: Yes
Additional Information: Sigma Blade mixer Jacket trough, with inside dimensions approx 56" long x 50" wide x 48" deep, bolted sides Unit is geared one side, with chain and sprocket drive 230/460 volt Amperage is rated for 174/87a Vessel has a tilt discharge. Hydraulic system is mounted to the machine base for the tilt function.
More Details ⟶
Stock Number: #704681
7.5 kW (10.1 HP) Stainless Steel 316 Mixer-Continuous
Motor Power: 10.1 HP
Diameter: 150 mm
Length: 900 mm
Orientation: Horizontal
Jacket Material: Stainless Steel 316
Screw: Yes
Number of Screws: 2
Additional Information: Type: Twin screw jacketed mixer 316 stainless steel shafts with scraper type removable blades. motor with cooling fan Unit with removable top, bottom and ends. Spare blades. Openings: feed 1-95mm; discharge 140mm x 75mm; 34-25mm on jacket.
More Details ⟶
Stock Number: #100541
2.2 kW (3 HP) Centrifuge-Misc. & Hydraulic
Motor Power: 2.2 kW
Description: Podbielniak centrifuge, 250psi @ 250° F, 1.0 specific gravity liquid, with Flender Himmel varispeed drive.
Is Podbielniak: Yes
Additional Information: centrifugal contactor Contract #92525 Liquid specific gravity 1.0. Seal pressure 250 psi, temp 250 deg F Equipped w/Loher 2.2 KW, 1400 rpm EExdeII-CD4 motor w/Flender Himmel varispeed drive, Type VUO16, belt 430J6, 6-590 rpm. B-belt in SS housing.
More Details ⟶
Stock Number: #202135
3,300 L (875 gallons) Carbon Steel Mixer-Double Arm
Capacity (Design): 875 gallons
Capacity (Working): 500 gallons
Jacket Pressure: 125 psi
Blade Type: dual Sigma blades
Blade Speed (RPM): 25.5
Tilting: Yes
Vacuum: Yes
Hydraulics: Yes
Additional Information: size 20 TUEM, jacketed, Bowl tilting time 35 seconds. Mixing trough 58.5" Front blade output speed 25.5 RPM. Rear blade output speed 14.5 RPM. V belt driven. Base is 16'7" long x 9' 11" wide.
More Details ⟶
Stock Number: #203506
3,300 L (875 gallons) Stainless Steel Other Mixer-Double Arm
Capacity (Design): 875 gallons
Capacity (Working): 500 gallons
Jacket Pressure: 125 psi
Blade Type: double arm (Sigma Blades)
Blade Speed (RPM): 25.5
Tilting: Yes
Vacuum: Yes
Hydraulics: Yes
Additional Information: 20 TUEM Carbon Steel,double arm (Sigma Blades) Vaccum cover is SS Bowl tilting time 35 seconds. Mixing trough 58.5". Front blade output speed 25.5 RPM. Rear blade output speed 14.5 RPM. Mixing arms
More Details ⟶
Stock Number: #702213
1.36 m3 (48 ft3) Stainless Steel 316 Dryer-Twin Shell & Double Cone
Capacity Design: 48 ft3
Capacity Operating: 30 ft3
Vessel Pressure: 0.019 psi
Jacket Pressure: 30 psi
Jacket Temperature: 212 °F
Additional Information: belt and pulley drive to Kopp variable speed gearbox coupled to fixed speed reducer and pinion drive. with a stand, access platform Shell 4' diameter x 7'8" high. safety cage. Speed variable 0.6-5.7 rpm Working pressure: container 1 torr;
More Details ⟶
Stock Number: #705836
25 L (6.6 gallons) Stainless Steel 321 Mixer-Double Arm
Capacity (Design): 25 L
Capacity (Working): 4 gallons
Jacket Pressure: 70 psi
Jacket Temperature: 153 °C
Jacket Material: Carbon Steel
Tilting: Yes
Hydraulics: Yes
Additional Information: Mixer type: Baker Perkins wings twin shaft mixer trough 330mm wide x 400mm long x 320mm deep shafts driven by a hydraulic motor, Motor model B060/P pressure 1000 psi, hydraulic motor is driven by a hydraulic powerpac, manufactured by Towler hydraulics, type PX-2138, pressure 90 bar, serial # M790229, powerpac with Towler hydraulic pump, type 1-R-70,
More Details ⟶
Stock Number: #32601
Stainless Steel 304 Baker Perkins Pellet Mill
Diameter: 7 in
Drive Power: 5 HP
Powered By: Electric
Additional Information: centrifugal pelletizer Has infared temp meter Adjustable cutting blade. Max rpm 10,000 Cooling jkt on die housing. 3/60/230/460 volt motor
More Details ⟶
no image found
Stock Number: #77569
1,700 L (450 gallons) Carbon Steel Mixer-Double Arm
Capacity (Design): 450 gallons
Capacity (Working): 300 gallons
Blade Type: Shredder blades
Tilting: Yes
Hydraulics: Yes
Additional Information: double arm jacketed mixer with shredder blades 154" long x 100" wide x 110" high. gear reducer 4/45 rpm. hydraulic powerpak for tilting mechanism, manufactured by Keelavate, driven by 3 HP, 3/50/400/440 volt, 940 rpm motor. Packing gland carbon steel dimple jacket on straight side, bottom and ends. Openings: top 1-5" (125mm) feed, (2) 22" x 17" (600mm x 430mm) hinged lids.
More Details ⟶
Request a Quote