Quote
Quote Cart
clear all items
Equipment Search

New and Used Equipment

Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Bepex
Clear all filters
Refine Results

Narrow these listings

Results 14 items found

Available equipment

Showing 14 of 14 matching equipment.

Featured
Stock Number: #203737
Briquetter / Chilsonator Bepex K300/200 Stainless Steel 316
Diameter: 11.8 in
Motor Power: 22 kW
Briquetter Type: Briquetter
Number of Rolls: 431
Roll details: (dimensions of the roles: 300mm diameter; 200mm wide), material roles SS (431) 1.4057
Additional Information: with feed hopper serial #10 486
More Details ⟶
Featured
Stock Number: #225385
Unused Dryer-Thermal Disc Bepex TD48-9
Diameter: 48 in
Length: 108 in
Height: 78 in
Number of Disc Shafts: 1
Vessel Temperature: 350 °F
Disc Temperature: 350 °F
Vessel Pressure: 15 psi
Disc Pressure: 100 psi
Operational Mode: Continuous
Heat Transfer Surface Area: 460 ft²
Additional Information: Bepex Torus Disc Cooler U shaped trough, continuous design. Certified by Moorhead Machinery & Boiler Co Moorhead Serial number 605-2300.
Shell rated 15 psi @ 350 degrees. No jacket on trough.
U shaped trough, bolted flat top, with one end bolted for rotor removal. Inside dimensions 48” ID x 9’ long Nominal 106 cubic foot working capacity, approx.
Unit has a tubular rotor with hollow discs mounted on the rotor to allow heating/cooling media to flow through the rotor. The shaft is mounted on outboard bearings, rotary joint on one end, packing glands. Chain and sprocket drive with a gear reducer and 25 HP 3/60/230/460 volt motor. 15 RPM shaft speed. The residence time is adjustable by and overflow weir at the discharge end.
More Details ⟶
Stock Number: #225384
Unused Carbon Steel Bepex TD48-9 Dryer-Thermal Disc
Diameter: 48 in
Length: 108 in
Height: 78 in
Number of Disc Shafts: 1
Vessel Temperature: 350 °F
Disc Temperature: 350 °F
Vessel Pressure: 15 psi
Disc Pressure: 100 psi
Operational Mode: Continuous
Heat Transfer Surface Area: 460 ft²
Additional Information: Bepex Torus Disc Cooler U shaped trough, continuous design. Certified by Moorhead Machinery & Boiler Co Moorhead Serial number 605-2299.
Working pressure in the hollow rotor is 100 PSI @ + 50 to 350 degrees F Shell rated 15 psi @ 350 degrees. No jacket on trough.
U shaped trough, bolted flat top, with one end bolted for rotor removal. Inside dimensions 48” ID x 9’ long Nominal 106 cubic foot working capacity, approx.
Unit has a tubular rotor with hollow discs mounted on the rotor to allow heating/cooling media to flow through the rotor. The shaft is mounted on outboard bearings, rotary joint on one end, packing glands. Chain and sprocket drive with a gear reducer and 25 HP 3/60/230/460 volt motor. 15 RPM shaft speed. The residence time is adjustable by and overflow weir at the discharge end.
More Details ⟶
Stock Number: #220748
Stainless Steel 304 Bepex RP-6K115 Colloid Mill
Drive Power: 3 HP
Powered By: Electric
Additional Information: Reitz "Disinigretor" Hammer mill Blades are 12" long with a 2.5" deep product chamber
More Details ⟶
Stock Number: #95891
Stainless Steel Other Dryer- Ribbon & Paddle
Jacket Pressure: 50 psi
Jacket Temperature: 250 °F
Agitation Shaft Sealing: Packing
Additional Information: Strong Scott Solidaire dryer Material of construction SS, with CS outer Jacket. 188" thick. Removable rotor. Outboard bearings.
More Details ⟶
Stock Number: #96831
Unused 1,750 mm (69 in) Carbon Steel Dryer-Thermal Disc
Diameter: 69 in
Length: 177 in
Height: 154 in
Number of Disc Shafts: 1
Vessel Temperature: 185 °F
Jacket Temperature: 385 °F
Vessel Pressure: 15 psi
Jacket Pressure: 190 psi
Hood/Cover: Yes
Operational Mode: Continuous
Heat Transfer Surface Area: 1,250 ft²
Additional Information: Torus disc dryer The rotor is 60" diameter x 14' long, and is hard faced. The rotor is cored for steam heating Heating medium is steam Trough is 69" wide x 177" long x 84" high with a vapor dome. Total height with dome cover is 154" high. Panel coil jacket on 25% of the dome cover. Continues product flow with retention time is controlled by adjustable product discharge weir. Rotor had hollow discs, and is chain and sprocket drive Outboard bearings, packing glands with N2 seal purge, Johnson rotary joint on shaft.
More Details ⟶
Stock Number: #96809
Unused Carbon Steel Bepex CRUJ-400 Dryer- Ribbon & Paddle
Design Capacity: 400 ft3
Operating Capacity: 250 ft3
Vessel Pressure: 15 psi
Vessel Temperature: 385 °F
Jacket Pressure: 190 psi
Jacket Temperature: 395 °F
Operational mode: Continuous
Heating Transfer Surface Area: 214 ft²
Heating Type: Steam
Ribbon Type: Paddles
Agitation Shaft Sealing: Packing
Additional Information: • Vessel is rated for internal full Vacuum. • Continuator, Trough inside dimensions 69" diameter x 195" long, with a dome top cover. • 25% of the dome cover has panel coils. • The rotor is 18" diameter with 8" stub shafts, packing glands on shaft. outboard bearings. • The rotor paddles are hard-faced. 12 rpm screw speed. • Continuous design with an adjustable discharge weir. • Designed for steam heat. If used as a hydrotreater for sludge, machine is rated 5.8 short tons/hr.
More Details ⟶
Stock Number: #96808
Unused 11.3 m3 (400 ft3) Carbon Steel Dryer- Ribbon & Paddle
Design Capacity: 400 ft3
Operating Capacity: 250 ft3
Vessel Pressure: 15 psi
Vessel Temperature: 385 °F
Jacket Pressure: 190 psi
Jacket Temperature: 385 °F
Operational mode: Continuous
Heating Transfer Surface Area: 214 ft²
Heating Type: Steam
Ribbon Type: Paddles
Agitation Shaft Sealing: Packing
Additional Information: Continuator, Trough inside dimensions 69" diameter x 195" long, 214 Square foot heating surface. with a dome top cover, 25% of the dome cover has panel coils. The rotor is 18" diameter with 8" stub shafts, packing glands on shaft. outboard bearings. The rotor paddles are hard-faced. The rotor has a chain & sprocket drive, with a Foote Jones gear reducer, 38.7:1 ratio. 12 rpm screw speed, driven by 75 HP, 3/60/460 volt motor. Continuous design with an adjustable discharge weir. Designed for steam heat. If used as a hydrotreator for sludge, machine is rated 5.8 short tons.hr.
More Details ⟶
Stock Number: #20615
Stainless Steel 304 Mixer-Continuous
Diameter: 32 in
Length: 234 in
Orientation: Horizontal
Plow Type: Paddles
Additional Information: continuous Solidaire non-jkt paddle mixer. Agitator is lined w/small flat adjustable pitched paddles. Outboard bearings on shaft. Openings: top 2-13 1/2", hd 1-4". No drive w/unit.
More Details ⟶
Stock Number: #96807
Unused Carbon Steel Dryer- Ribbon & Paddle
Design Capacity: 400 ft3
Operating Capacity: 250 ft3
Vessel Pressure: 15 psi
Vessel Temperature: 385 °F
Jacket Pressure: 190 psi
Jacket Temperature: 385 °F
Operational mode: Continuous
Heating Transfer Surface Area: 214 ft²
Heating Type: Steam
Ribbon Type: Paddles
Agitation Shaft Sealing: Packing
Additional Information: Bepex Continuator 214 Square foot heating surface. with a dome top cover, 159.5 overall all height. 25% of the dome cover has panel coils. The rotor is 18" diameter with 8" stub shafts, packing glands on shaft. outboard bearings. The rotor paddles are hard-faced. The rotor has a chain & sprocket drive12 rpm screw speed. Continuous design with an adjustable discharge weir. Designed for steam heat. If used as a hydrotreater for sludge, machine is rated 5.8 short tons.hr.
More Details ⟶
Stock Number: #96720
Unused 1,200 mm (48 in) Carbon Steel Dryer-Thermal Disc
Diameter: 48 in
Length: 108 in
Height: 88 in
Number of Disc Shafts: 1
Vessel Temperature: 385 °F
Disc Temperature: 350 °F
Vessel Pressure: 15 psi
Disc Pressure: 100 psi
Type of Shaft Sealing: Packing glands
Operational Mode: Continuous
Heat Transfer Surface Area: 460 ft²
Additional Information: Torus disc cooler Vessel rated 15 psig/full vacuum @ 385 degree F Outboard bearings Johnson rotary joints on shaft Max speed 15 rpm
More Details ⟶
Stock Number: #96719
Unused 1,200 mm (48 in) Carbon Steel Dryer-Thermal Disc
Diameter: 48 in
Length: 108 in
Height: 88 in
Number of Disc Shafts: 1
Vessel Temperature: 385 °F
Disc Temperature: 350 °F
Vessel Pressure: 15 psi
Disc Pressure: 100 psi
Type of Shaft Sealing: Packing gland
Operational Mode: Continuous
Heat Transfer Surface Area: 460 ft²
Additional Information: Torus disc cooler
More Details ⟶
no image found
Stock Number: #204772
Stainless Steel 304 Bepex JMX JS 250 Mixer-Ribbon & Paddle
Design Capacity: 350 ft3
Operating Capacity: 250 ft3
Vessel Pressure: 14.7 psi
Vessel Temperature: 100 °F
Operational mode: Batch
Ribbon Type: Double Helix
Paddle/Ribbon MOC: Carbon Steel
Length: 154 in
Width: 61 in
Height: 67 in
Additional Information: ribbon blender Vessel rated for atmospheric Jacket code stamped designed for batch processing 304 Stainless Steel body with 304 SS dimple jacket Shell rated atmospheric @ 100 degrees F. Jacket rated for 150 psi @ 100 degrees F. Estimated heating surface area is 165 Sq.Ft. AC Reliance High Efficiency XE motor Dodge TM gear reducer Dodge Gear Reducer is a size # 281TU900A2, ID # 40401934PF rated for 30 HP, 24 rpm output with a 47:1 ratio. Chain driven. Two 8" pneumatic discharge gate valves. Closed top with two grated openings.
More Details ⟶
Stock Number: #246914
Stainless Steel 316 Bepex Briquetter
Diameter: 10 in
Motor Power: 15 HP
Briquetter Type: Briquetter
Capacity (Design): 800 lb/h
Number of Rolls: 2
Roll details: two roll briquetter. 3 rows briquettes.
Additional Information: • Briquette Size 1.25" long x 1" wide x 0.25" deep • Roll size is 10" diameter x 4" wide with a 4" shaft
More Details ⟶
Request a Quote