Quote
Quote Cart
clear all items
Equipment Search

New and Used Equipment

Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Buflovak/Blaw Knox
Clear all filters
Refine Results

Narrow these listings

Results 13 items found

Available equipment

Showing 13 of 13 matching equipment.

Featured
Stock Number: #246737
Rising/Falling Film Evaporator Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316
Evaporation Rate: 14,900 lb/h
Total Heat Transfer Surface Area: 2,850 ft²
Orientation: Vertical
Pressure: 120 psi
Temperature: 300 °F
Vacuum: Yes
Number of Effects: 2
Vapor Body #1: 316 SS 36" OD x 102 " SS, lug Mounted Print weight 1400 lbs.
Vapor Body # 2: 316SS 42" OD x 102" SS, lug mounted Print weight 2000 lbs.
Steam Chest #1: 903 Sq.Ft. 316 SS tubes and tube sheets, CS shell. 36" OD x 319" OAL . 116 straight tubes, 1.5"OD x 239" Vertical lug mount.
Steam Chest # 2: 1924 Sq.Ft. 316 SS tubes and tube sheets, CS shell. 34" OD x 333" OAL 245 1.5" tubes 0.049" wall x 20' long. Vertical lug mount.
Condenser: 900 Sq.Ft. 316 SS tubes, tube sheets and heads, CS shell. 30" OD x 137" OAL, 430 straight tubes 1" OD x 0.049" wall x 8' long Horizontal saddle mounted.
Additional Information: Feed Heating: 316 SS plate & Frame Alfa Laval 27 Sq.Ft. & 51 Sq.Ft..
More Details ⟶
Stock Number: #220739
Stainless Steel 316 Rising/Falling Film Evaporator
Evaporation Rate: 16,000 lb/h
Total Heat Transfer Surface Area: 900 ft²
Pressure: 50 psi
Temperature: 300 °F
Additional Information: • tubular evaporation system manufactured by Buflovak-Blaw-Knox. Includes 5 main pieces and support equipment such as pumps and small plate heat exchanger. Main pieces are as follows:(D) 1st effect steam chest (heat exchanger), 900 Sq Ft. NB #8255/ 9393, SN # 17669/18701, (1997) rated for 50 psi at 300 degrees on the shell, Model 1256642. 36" diameter x 10' OAL mounted vertical. (C) 1st effect vapor separator, RRFC, 42" diameter x 9' OAL with top side man way and "York" style 931 316 SS demisting mesh packing for vapor carry over.(needs to be replaced). (E) 2nd effect heater, 4' diameter x 13' OAL, with (B) 38" diameter x 8' OAL separator with cone bottom. NB # 3136, serial # 11514, Rated for MAWP Vacuum at 179 degrees F. ( HSB # 2544B) Plant # S-11181-2. With 18" man way and sight glass. With 12" interconnecting pipe, and elbow pump. Overhead condenser (A) approx. 2000 Sq. ft., 316 SS , 2/4 pass on tube side(cooling) with 12" water inlet/outlet. Discharge of overheads to distillate. 30" diameter x 10' 3" OAL, saddle mounted, with two 40 Lb. steam jets to supply vacuum.
More Details ⟶
Stock Number: #247011
Stainless Steel 304 Buflovak/Blaw Knox Rising/Falling Film Evaporator
Evaporation Rate: 21,100 lb/h
Total Heat Transfer Surface Area: 4,200 ft²
Orientation: Vertical
Pressure: 14 psi
Temperature: 300 °F
Vacuum: Yes
Number of Effects: 2
Vapor Body #1: 304 SS top 54" diameter x 84" long (vapor) bottom is 24" diameter x 72" long. (liquid) Lug mounted, with welded dish heads.
Vapor Body # 2: 304 SS 64" diameter x 150' straight side with welded dish heads. Lug mounted. Manufactured by IPS Inc. serial # 05-1122, NB # 135.
Steam Chest #1: 2315 Sq.Ft., 304 SS with CS shell, vertical steam chest. 38" diameter x 157" long, with clamped heads mounted by lugs. Estimated 442 straight tubes 2" OD x 10" long.
Steam Chest # 2: 1906 Sq.Ft., 304SS tubes with CS shell vertical steam chest. 32" diameter x 163" long side with clamped heads, mounted by lugs. Estimated 364 straight tubes 2" OD x 10' long.
Condenser: Alfa Laval spiral, See stock # 246876 for details
Additional Information: Second Effect separator replaced by IPS, Inc.-Condenser changed from original design and now is an Alfa Laval spiral, IPP stock # 246876. 270 Sq.Ft., 316 SS clad on CS, 55 psi at 300 degrees F. Feed Heating: No.
More Details ⟶
Stock Number: #108064
Stainless Steel 304 Buflovak/Blaw Knox Dryer-Rotary Vacuum
Capacity Design: 125 ft3
Capacity Working: 82 ft3
Diameter: 48 in
Length: 120 in
Rated for Vacuum: Yes
Heat Transfer Surface Area: 125 ft²
Shaft Cored and National Board Stamped: Yes
Agitation Seal Type: Packing
Jacket Pressure: 50 psi
Jacket Temperature: 300 °F
Additional Information: HSB # 3332A Shell rated full vacuum 4' diameter x 10' long chamber Has 24" diameter cored removable shaft with paddles and bolt-on scraper blades. 3" Johnson rotary joint. Has 12" diameter bottom outlet with hinged swing bolt cover. 2-12" feed ports.
More Details ⟶
Stock Number: #220772
Stainless Steel 316 Buflovak/Blaw Knox Tank
Capacity (Design): 1,900 gallons
Orientation: Vertical
Diameter: 60 in
Straight-side Length: 148 in
Internal Pressure: 25 psi
Internal Temperature: 212 °F
Vacuum: Yes
Cone Length: 53 in
Support: Lugs
Additional Information: Vapor body/separators for evaporation system Vapor head and swirl breaker dimensions: 68" diameter x 148" long with a slight cone drop leg is 12" diameter x 120" long. All welded construction
More Details ⟶
Stock Number: #31727
626 kg/h (1,400 lb/h) Stainless Steel 304 Wiped/Thin Film Evaporator
Evaporation Rate: 1,400 lb/h
Total Heat Transfer Surface Area: 50 ft²
Diameter: 40 in
Height: 68 in
Pressure: 15 psi
Temperature: 400 °F
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Additional Information: 304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system Mfd by Buflovak 165 psi @ 400 deg F jkt. NB stamped 5931. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor speed. (motor for drive not available). Unit has external upper & lower bearings, mech seals on shaft. Unit has 3" feed port and 10" x 24" discharge into centrifugal vapor/liquid separator. 36" deep cone btm. W/system is 565 sq ft, 304LSS shell side, CS head, horiz condenser with 3/4" OD x 18 bwg, 304LSS tubes, 143" long. 6 pass tube side. 18" dia 304ELC SS shell 161" overall length. CS channels. Unit designed for 30 psi & full vac @ 400 deg F shell side; 100 psig @ 400 deg F tube side. Openings: shell 1-10", 1-3"; channels 2-4" one head, (2) 3/4" other head. Mfd by Patterson Kelly. Also w/unit is an 81 sq ft aftercondenser. Mfd by Graham, 304SS shell side, CS tube side. Unit rated 50 psig/full vac @ 150 deg F shell side; 75 psig @ 150 deg F tube side. Asme code constructed. 8" dia shell, 8' long tubes, 9'11" overall length.
More Details ⟶
Stock Number: #31726
626 kg/h (1,400 lb/h) Stainless Steel 304 Wiped/Thin Film Evaporator
Evaporation Rate: 1,400 lb/h
Total Heat Transfer Surface Area: 50 ft²
Diameter: 40 in
Height: 68 in
Pressure: 15 psi
Temperature: 400 °F
Vacuum: Yes
Mechanical Seal on Shaft: Yes
Additional Information: 304 ELC SS 40% clad on Carbon steel (for product contact), thin film evaporator system 165 psi @ 400 deg F jkt NB stamped 5932. Rotor was under driven by 20 HP, 3/60/220/440 volt mtr w/UL label, 480 rpm rotor speed Unit has external upper & lower bearings, mech seals on shaft. Unit has 3" feed port and 10" x 24" discharge into centrifugal vapor/liquid separator. 36" deep cone btm W/system is 565 sq ft, 304LSS shell side, CS head, horiz condenser with 3/4" OD x 18 bwg, 304LSS tubes, 143" long. 6 pass tube side. 18" dia 304ELC SS shell 161" overall length. CS channels. Unit designed for 30 psi & full vac @ 400 deg F shell side; 100 psig @ 400 deg F tube side. Openings: shell 1-10", 1-3"; channels 2-4" one head, (2) 3/4" other head. Mfd by Patterson Kelly. Also w/unit is an 81 sq ft aftercondenser. Mfd by Graham, 304SS shell side, CS tube side. Unit rated 50 psig/full vac @ 150 deg F shell side; 75 psig @ 150 deg F tube side. Asme code constructed. 8" dia shell, 8' long tubes, 9'11" overall length.
More Details ⟶
Stock Number: #102517
304.8 mm (12 in) Stainless Steel 316 Dryer-Drum
Diameter: 12 in
Length: 18 in
Drum Heating-Cooling: Heating
Heating Type: Steam
Drum Configuration: Single
Additional Information: single drum dip feed dryer Drum cored for steam heating Manual knife discharge Has 15" x 19" CS jkt feed pan 3/60/230/460 volt, rated 44 rpm max, 8.8 rpm min
More Details ⟶
Stock Number: #79679
Stainless Steel 304 Buflovak/Blaw Knox Dryer-Rotary Vacuum
Capacity Design: 55 ft3
Capacity Working: 40 ft3
Diameter: 32 in
Length: 120 in
Temperature: 300 °F
Pressure: 55 psi
Rated for Vacuum: Yes
Heat Transfer Surface Area: 84 ft²
Shaft Cored and National Board Stamped: Yes
Orientation: Horizontal
Agitation: Yes
Jacket Material: Carbon Steel
Additional Information: rotary vac dryer 32" dia x 10' long shell. Bolt flat heads 12" dia charge port, 12" center btm discharge Approx 10" dia SS hollowshaft. 69.4 ratio
More Details ⟶
no image found
Stock Number: #246882
Stainless Steel Other Buflovak/Blaw Knox Grainer Dryer-Pan
Capacity Design: 66 ft3
Capacity Working: 44 ft3
Diameter: 68 in
Height: 34 in
Pressure: 14 psi
Temperature: 300 °F
Vacuum Rated: Yes
Jacket?: Yes
Jacket Type: Standard
Jacket Material: Carbon Steel
Jacket Pressure: 25 psi
Jacket Temperature: 300 °F
Additional Information: Grainer # 2 Welded dish bottom and bolted top head.
More Details ⟶
no image found
Stock Number: #246883
Stainless Steel Other Buflovak/Blaw Knox Grainer Dryer-Pan
Capacity Design: 66 ft3
Capacity Working: 44 ft3
Diameter: 68 in
Height: 34 in
Pressure: 14 psi
Temperature: 300 °F
Vacuum Rated: Yes
Jacket?: Yes
Jacket Type: Standard
Jacket Material: Carbon Steel
Jacket Pressure: 25 psi
Jacket Temperature: 300 °F
Additional Information: Grainer # 3 Welded dish bottom and bolted top head.
More Details ⟶
no image found
Stock Number: #246880
Stainless Steel Other Buflovak/Blaw Knox Grainer Dryer-Pan
Capacity Design: 66 ft3
Capacity Working: 44 ft3
Diameter: 68 in
Height: 34 in
Pressure: 14 psi
Temperature: 300 °F
Vacuum Rated: Yes
Jacket?: Yes
Jacket Type: Standard
Jacket Material: Carbon Steel
Jacket Pressure: 25 psi
Jacket Temperature: 300 °F
Additional Information: Welded dish bottom and bolted top head.
More Details ⟶
no image found
Stock Number: #246881
Stainless Steel Other Buflovak/Blaw Knox Grainer Dryer-Pan
Capacity Design: 66 ft3
Capacity Working: 44 ft3
Diameter: 68 in
Height: 34 in
Pressure: 14 psi
Temperature: 300 °F
Vacuum Rated: Yes
Jacket?: Yes
Jacket Type: Standard
Jacket Material: Carbon Steel
Jacket Pressure: 25 psi
Jacket Temperature: 300 °F
Additional Information: Grainer # 1 SO63-6634 Welded dish bottom and bolted top head.
More Details ⟶
Request a Quote