Quote
Quote Cart
clear all items
Equipment Search

New and Used Equipment

Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Schenk
Clear all filters
Refine Results

Narrow these listings

Results 21 items found

Available equipment

Showing 21 of 21 matching equipment.

Featured
Stock Number: #231224
Polypropylene Schenk Filter Press
Filtration Area: 17.5 m²
Cake Volume: 2 m3
Filter Press Plate Type: Plate and Frame
Number of Frames: 28
Number of Plates: 27
Plate MOC: Stainless Steel 316
Skeleton MOC: 316 SS
Plate Diameter or Width: 600 mm
Plate Height: 600 mm
Plate Thickness: 50 mm
Plates Recessed: Yes
Plates Shifted By: Manual
Additional Information: • Stainless steel recessed plate and polypropylene frame filter press. • (2) eye top and bottom feed/discharge. • Stainless steel skeleton. • Hydraulic press mechanism with built on power pack and manual controls
More Details ⟶
Stock Number: #208458
40 m² (430.6 ft²) Stainless Steel 321 Pressure Leaf Filter
Filtration Area: 40 m²
Diameter: 1,200 mm
Orientation: Vertical
Pressure: 6 bar
Temperature: 20 °C
Additional Information: Centrifugal discharge pressure leaf filter • Vessel number: 5062GW • Vessel volume: 2000 ltr (1) end head plate, (104) approx 1.2m diameter x 1.5mm straight side vertical chamber associated equipment includes, 1 x 1800 ltr 321. stainless steel vertical pressure tank, 0.5 bar @ 20° C, weld dished top and bottom, 1 x approx. 268 ltr stainless steel vertical aggitated tank, (1) auma (system Lewa) pump system type: EHV-L, serial#328114-010.004 (3) electrical panels
More Details ⟶
Stock Number: #208460
Stainless Steel Austenitic Schenk F1 - 1000/85 Press Filter
Filtration Area: 1,100 ft²
Pressure: 8 bar
Number of Plates: 111
Plate MOC: Stainless Steel 316
Skeleton MOC: Stainless Steel 316
Plate Diameter or Width: 1,000 mm
Plate Height: 1,000 mm
Plate Thickness: 0.35 in
Plates Shifted By: Manual
Additional Information: • Polishing plate filter press • Hydraulic press mechanism driven by hydraulic powerpac which is built into a control cabinet • 2 -80mm openings on plates, Stainless Steel skeleton includes (1) Photometer, manufactured by Sigrist, and stainless steel walkway platform with steps and handrail
More Details ⟶
Stock Number: #208459
Stainless Steel Austenitic Schenk F1 - 1000/125 Press Filter
Filtration Area: 2,000 ft²
Pressure: 8 bar
Filter Press Plate Type: Un-Gasketed Recessed
Number of Plates: 199
Plate MOC: Stainless Steel 316
Skeleton MOC: Stainless Steel 316
Plate Diameter or Width: 1,000 mm
Plate Height: 1,000 mm
Plate Thickness: 0.35 in
Plates Shifted By: Manual
Additional Information: • Polishing plate, filter press with (199) 316 s/steel polishing plates. • Hydraulic press mechanism driven by hydraulic power pac which is built into a control cabinet. • 2 -80mm openings on plates • Stainless Steel skeleton, includes (1) Photometer, manufactured by Sigrist, and a s/steel walkway platform with steps and handrail.
More Details ⟶
Stock Number: #217843
15 m² (161.9 ft²) Stainless Steel Austenitic Pressure Leaf Filter
Filtration Area: 15 m²
Orientation: Vertical
Pressure: 6 bar
Temperature: 200 °C
Jacket: Yes
Jacket Pressure: 6 bar
Jacket Temperature: 200 °C
Additional Information: vessel # 5293GW rated inside -1/6bar volume 1.000 liter rated jacket -1/6bar volume 110 liter, vertical jacketed centrifugal discharge. Cake capacity 0.45 cubic feet.
More Details ⟶
Stock Number: #92821
Stainless Steel 304 Schenk ZHF-S-40/30 Pressure Leaf Filter
Filtration Area: 28.8 m²
Diameter: 54 in
Orientation: Vertical
Pressure: 90 psi
Temperature: 200 °F
Additional Information: Certified by Votator Corp horizontal plate design thru Falk gearbox, input 1750, ratio 6.246:1, output 290 Shell is 0.375 " thick head is 0.375" thick, head is 0.500" thick
More Details ⟶
Stock Number: #208456
Stainless Steel 321 Schenk ZHF-S80 Pressure Leaf Filter
Filtration Area: 80 m²
Diameter: 1,500 mm
Orientation: Vertical
Pressure: 6 bar
Temperature: 20 °C
Additional Information: vessel volume 5250 liter approx 1.6m diameter x 1.6mm straight side vertical chamber, approx 300mm discharge, mounted on (3) stainless steel legs, associated equipment includes 1 x 3000 liter vertical stainless steel pressure tank, pressure 0,5 bar to 20°C, 1.4m diameter x 1.4m straight side, weld dished top, weld coned bottom, mounted on 3 legs, 1 x approx 600 liter stainless steel tank with agitator, 2 x diaphragm pumps, 1 x Hilge centrifugal pump.
More Details ⟶
Stock Number: #202024
Polypropylene Schenk KFP 470/30-9 Filter Press
Filtration Area: 26.5 ft²
Pressure: 15 bar
Cake Volume: 2.4 ft3
Filter Press Plate Type: Un-Gasketed Recessed
Number of Plates: 15
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 470 mm
Plate Height: 470 mm
Plate Thickness: 75 mm
Plates Recessed: Yes
Plates Shifted By: Manual
Additional Information: • Operating pressure 7/15 bar. 4 eye. • With red and blue button plates for washing.
More Details ⟶
Stock Number: #92822
28.8 m² (310 ft²) Stainless Steel 304 Pressure Leaf Filter
Filtration Area: 310 ft²
Diameter: 54 in
Orientation: Vertical
Pressure: 90 psi
Temperature: 200 °F
Additional Information: Horizontal plate design Centrifugal discharge driven by 40 HP, 3/60/230/460 volt, 1775 rpm motor thru Falk gearbox input 1750, ratio 6.246:1, output 290
More Details ⟶
Stock Number: #204509
10 m² (107.6 ft²) Stainless Steel Austenitic Pressure Leaf Filter
Filtration Area: 10 m²
Orientation: Vertical
Pressure: 6 bar
Temperature: 200 °C
Jacket: Yes
Additional Information: Capacity: 760 liter Temperature Range: -25/200 deg C driven by hydraulic
More Details ⟶
Stock Number: #88512
2.5 m² (26.9 ft²) Stainless Steel Austenitic Pressure Leaf Filter
Filtration Area: 26.9 ft²
Orientation: Vertical
Pressure: 90 psi
Temperature: 200 °C
Jacket: Yes
Jacket Pressure: 90 psi
Jacket Temperature: 200 °F
Additional Information: Internal pressure 90 psi (6.2 ATU and full vacuum) @ 200 degrees C; jacket 90 psi @ 200 degrees C (16) horizontal leaves Centrifugal discharge driven by 4 PS, 3/50/500 volt, 462 rpm XP motor
More Details ⟶
Stock Number: #231026
9.5 m² (102.3 ft²) Stainless Steel Austenitic Pressure Leaf Filter
Filtration Area: 9.5 m²
Diameter: 950 mm
Pressure: 6 bar
Temperature: 200 °C
Additional Information: Pressure leaf/plate filter Internal volume: 640 liters Internal pressure: -1/6 bar approx (20) 800mm diameter stainless steel internal horizontal filter plates manual screw press mechanism, davit assist for top cover
More Details ⟶
Stock Number: #231027
9.5 m² (102.3 ft²) Stainless Steel Austenitic Pressure Leaf Filter
Filtration Area: 9.5 m²
Diameter: 950 mm
Pressure: 6 bar
Temperature: 200 °C
Additional Information: Pressure leaf/plate filter Internal volume: 640 liters pressure -1/6 bar manual screw press mechanism, davit assist for top cover
More Details ⟶
Stock Number: #208457
80 m² (861 ft²) Stainless Steel 321 Pressure Leaf Filter
Filtration Area: 80 m²
Diameter: 1,500 mm
Orientation: Vertical
Pressure: 6 bar
Temperature: 20 °C
Additional Information: Centrifugal discharge pressure leaf filter Vessel volume: 5250 ltr approx 1.6m diameter x 1.6mm straight side vertical chamber associated equipment includes, 2 x diaphragm pumps, 1 x Hilge centrifugal pump,
More Details ⟶
Stock Number: #202747
Stainless Steel Austenitic Schenk ZHF-SR10KL Pressure Leaf Filter
Filtration Area: 4.7 m²
Diameter: 805 mm
Pressure: 6 bar
Temperature: 150 °C
Jacket: Yes
Jacket Pressure: 9 bar
Jacket Type: Half Pipe/Limpet
Jacket MOC: Carbon Steel
Jacket Temperature: 150 °C
Additional Information: jacket 1,9 bar at 150°C (10) 316Ti stainless steel filter leaves Mechanical seal on shaft, carbon steel half pipe coil on bottom head Filter volume 670 liter
More Details ⟶
Stock Number: #215247
Stainless Steel Austenitic Schenk ZHF-SR15 KLKB1 Pressure Leaf Filter
Filtration Area: 15 m²
Diameter: 805 mm
Orientation: Vertical
Pressure: 6 bar
Temperature: 100 °C
Additional Information: Vessel Number 5056GW Capacity: 955 liters Centrifugal wet cake discharge (32) 805mm diameter elements, (2) 805mm diameter scavenger elements mechanical seal
More Details ⟶
Stock Number: #204563
Polypropylene Schenk Membrane Filter Press
Filtration Area: 818 ft²
Cake Volume: 100 ft3
Filter Press Plate Type: Membrane Plates
Number of Plates: 53
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 1,200 mm
Plate Height: 1,200 mm
Plate Thickness: 80 mm
Plates Shifted By: Manual
Additional Information: • Membrane filter press. • Hydraulic driven by Siemens 500 V 50 Hz 4,2 A 1410 rpm EEx e II.
More Details ⟶
Stock Number: #215246
Stainless Steel Austenitic Schenk ZHF-SR15 KLKB1 Pressure Leaf Filter
Filtration Area: 15 m²
Diameter: 805 mm
Orientation: Vertical
Pressure: 6 bar
Temperature: 100 °C
Number of Filter Elements: 32
Vessel Liquid Capacity: 955 L
Scavenging: Yes
Number of Scavenging Elements: 2
Additional Information: Vessel Number: 5055GW Capacity: 955 liters Centrifugal wet cake discharge Elements: (32) 805mm diameter elements, (2) 805mm diameter scavenger elements Seal: Mechanical seal under driven
More Details ⟶
Stock Number: #38873
5 m² (53.8 ft²) Stainless Steel 316 Pressure Leaf Filter
Filtration Area: 53.8 ft²
Diameter: 32 in
Pressure: 6 bar
Temperature: 200 °C
Additional Information: pressure leaf filter body Discharge type: centrifugal Tank capacity: 350 litres Serial number: KH839 Int rated 6 bar/full vac @ 200 deg C Unit will take (10) leaves Vessel is 900mm (36"). No leaves w/unit.
More Details ⟶
Stock Number: #89367
5.7 m² (61.4 ft²) Stainless Steel 316 Pressure Leaf Filter
Filtration Area: 5.7 m²
Diameter: 900 mm
Pressure: 6 bar
Jacket: Yes
Jacket Pressure: 6 bar
Jacket MOC: Stainless Steel 321
Jacket Temperature: 200 °C
Additional Information: jaceketed pressure leaf filter with centrifugal discharge Shell made of 316 stainless steel (1.4439) jacket made of 1.4571 Internal pressure 6 bar & full vacuum ; jacket 6 bar @ -10/+200 degrees C with control panel Filter volume 670 liter, jacket volume 45 liter
More Details ⟶
Stock Number: #210272
Stainless Steel Austenitic Pressure Leaf Filter
Filtration Area: 6.5 m²
Diameter: 80 mm
Pressure: 6 bar
Temperature: 200 °C
Jacket: Yes
Jacket MOC: Stainless Steel 304
Additional Information: 1 sqm rest filtration area Vessel volume: 500 ltr Jacket volume: 46 ltr Internal pressure: vac/6 bar @ -10/200 degrees C Number of filter elements: 13 Number of rest filter elements: 2 Distance between filter elements: 30mm filter cake volume 150 ltr
More Details ⟶
Request a Quote