IPP# 99785 - Mixer-Ribbon & Paddle 1.5 m3 (53 ft3) Stainless Steel 304 For Sale

Type: Mixer-Ribbon & Paddle

Manufacturer: Patterson Kelly

Condition: Used

Material: Stainless Steel 304

Design Capacity: 12.7 m3 (450 ft3)

Operating Capacity: 8.5 m3 (300 ft3)

cylindrical slurry blender,
Has single shaft agit w/approx (12) paddle arms.
Sprocket for chain drive, takes 25 HP.
Openings: top 2-12", 2-10", 2-2";
heads 2-20"; 1-6" and 1-2" outlet.

Ribbon Type: Paddles. Length: 4,877 mm (192 in). Width: 1,829 mm (72 in).

Type: Mixer-Ribbon & Paddle

Manufacturer: Littleford Bros, Inc

Model: FKM-600-D

Condition: Used

Material: Stainless Steel 304

Design Capacity: 0.793 m3 (28 ft3)

Vessel Pressure: -0.965 bar (-14 psi)

• Product contact Designed for batch operation.
• Designed for vacuum operation to -25 "hg.
• Internal finish polished to a 120 grit finish.
• Center bottom discharge 15.5" ID.

Operational mode: Batch. Paddle/Ribbon MOC: Stainless Steel 304. Agitation Shaft Sealing: Packing. Length: 1,219 mm (48 in). Width: 914 mm (36 in). Height: 914 mm (36 in).

Type: Mixer-Ribbon & Paddle

Manufacturer: The Young Industries, Inc.

Model: 300L

Condition: Used

Material: Stainless Steel 304

Design Capacity: 8.5 m3 (300 ft3)

Operating Capacity: 7.79 m3 (275 ft3)

Ribbon Blender
Size 300L, Single ribbon design, packing glands on shaft, removable ribbon design.
Ribbon has a large sprocket on end of shaft for chain drive, no drive with unit.
Blender trough is 60" wide x 144" long x 72" deep, with a bolted on SS cover
The shaft measures 7 1/4" od.

Ribbon Type: Single Helix. Paddle/Ribbon MOC: Stainless Steel Other. Agitation Shaft Sealing: Packing. Length: 3,658 mm (144 in). Width: 1,524 mm (60 in). Height: 1,829 mm (72 in).

Type: Mixer-Ribbon & Paddle

Manufacturer: Loedige Littleford Ploughshare

Model: KM8000

Condition: Used

Material: Stainless Steel 304

Design Capacity: 8 m3 (283 ft3)

Operating Capacity: 5 m3 (177 ft3)

continuous mixing
25,000 kg/hr
8000 liter(2113 gallon) total capacity
with (2) side hatches with hinged covers and hand wheel swing bolts, (1) 16" x 24" ID top drive end charge port, (1) 16" ID vent port top center, and (1) 17" x 20" ID bottom end discharge port.
Internal shaft with plows
3/60/230/460 volt
1750 rpm down to 90 rpm
Weight 17,200 lbs.

Operational mode: Continuous. Ribbon Type: Plows. Length: 7,391 mm (291 in). Width: 1,727 mm (68 in). Height: 2,286 mm (90 in).