Rising/Falling Film Evaporator Buflovak/Blaw Knox x-320 steam chest Stainless Steel 316 - IPP# 246737

Type: Evaporator

Subtype: Rising/Falling Film

Manufacturer: Buflovak/Blaw Knox

Condition: Used

Material: Stainless Steel 316

Evaporation Rate: 7,257 kg/h (16,000 lb/h)

Total Heat Transfer Surface Area: 83.6 m² (900 ft²)

• tubular evaporation system manufactured by Buflovak-Blaw-Knox. Includes 5 main pieces and support equipment such as pumps and small plate heat exchanger. Main pieces are as follows:(D) 1st effect steam chest (heat exchanger), 900 Sq Ft. NB #8255/ 9393, SN # 17669/18701, (1997) rated for 50 psi at 300 degrees on the shell, Model 1256642. 36" diameter x 10' OAL mounted vertical. (C) 1st effect vapor separator, RRFC, 42" diameter x 9' OAL with top side man way and "York" style 931 316 SS demisting mesh packing for vapor carry over.(needs to be replaced). (E) 2nd effect heater, 4' diameter x 13' OAL, with (B) 38" diameter x 8' OAL separator with cone bottom. NB # 3136, serial # 11514, Rated for MAWP Vacuum at 179 degrees F. ( HSB # 2544B) Plant # S-11181-2. With 18" man way and sight glass. With 12" interconnecting pipe, and elbow pump. Overhead condenser (A) approx. 2000 Sq. ft., 316 SS , 2/4 pass on tube side(cooling) with 12" water inlet/outlet. Discharge of overheads to distillate.
  30" diameter x 10' 3" OAL, saddle mounted, with two 40 Lb. steam jets to supply vacuum.

Pressure: 3.45 bar (50 psi). Temperature: 149 °C (300 °F).

Type: Evaporator

Subtype: Rising/Falling Film

Manufacturer: Buflovak/Blaw Knox

Condition: Used

Material: Stainless Steel 304

Evaporation Rate: 9,573 kg/h (21,105 lb/h)

Total Heat Transfer Surface Area: 392 m² (4,221 ft²)

Second Effect separator replaced by IPS, Inc.-Condenser changed from original design and now is an Alfa Laval spiral, IPP stock # 246876. 270 Sq.Ft., 316 SS clad on CS, 55 psi at 300 degrees F.

Orientation: Vertical. Pressure: 0.965 bar (14 psi). Temperature: 149 °C (300 °F). Vacuum: Yes. Number of Effects: 2. Vapor Body #1: 304 SS top 54" diameter x 84" long (vapor) bottom is 24" diameter x 72" long. (liquid) Lug mounted, with welded dish heads.. Vapor Body # 2: 304 SS 64" diameter x 150' straight side with welded dish heads. Lug mounted. Manufactured by IPS Inc. serial # 05-1122, NB # 135.. Steam Chest #1: 2315 Sq.Ft., 304 SS with CS shell, vertical steam chest. 38" diameter x 157" long, with clamped heads mounted by lugs. Estimated 442 straight tubes 2" OD x 10" long.. Steam Chest # 2: 1906 Sq.Ft., 304SS tubes with CS shell vertical steam chest. 32" diameter x 163" long side with clamped heads, mounted by lugs. Estimated 364 straight tubes 2" OD x 10' long.. Condenser: Alfa Laval spiral, See stock # 246876 for details. Feed Heating: No.

Type: Evaporator

Subtype: Rising/Falling Film

Manufacturer: Kleiser Gmbh

Condition: Used

Material: Stainless Steel 316

Evaporation Rate: 9,400 kg/h (20,723 lb/h)

Orientation: Vertical

single effect falling film evaporator
pressure internal -1/6 bar @ 200 degrees C (1291 liter), jacket -1/6 bar @ 200 degrees C (1020 liter) 9.4 m3/hour evaporation rate
single pass tubeside, 316Ti (1.4571) stainless steel tubesheets, 700mm diameter 316Ti stainless steel (1.4571) shell with expansion joint, 7250mm overall length, (1) 316Ti stainless steel (1.4571) dished head, (1) 316Ti stainless steel (1.4571) bonnet head
evaporator with (1) 316Ti stainless steel (1.4571) expansion boiler, 1227 liter, 800mm diameter x 2250mm, pressure and vacuum resistant, manual valves and control valves

Pressure: 6 bar (87 psi). Temperature: 200 °C (392 °F). Vacuum: Yes.

Type: Evaporator

Subtype: Rising/Falling Film

Condition: Used

Material: Stainless Steel 316

Total Heat Transfer Surface Area: 17.3 m² (186 ft²)

Orientation: Vertical

SMS vertical single effect falling film evaporator,
c/steel heads
pressure shell side 5.5/8 bar @ 160/170 degrees C (190 liter)
tube side vacuum @ 45/145 degrees C (160 liter),
Shell dimensions: 368mm diameter x 8mm

Pressure: 8 bar (116 psi). Temperature: 170 °C (338 °F). Vacuum: Yes.