IPP# 704420 - Mixer-Intensive 36 L (9.51 gallons) Stainless Steel 316 For Sale

Type: Mixer-Intensive

Manufacturer: Gunther Papenmeier

Model: TGAHK

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 37.9 L (10 gallons)

Motor Power: 22.4 kW (30 HP)

high intensity mixer
Has 3-blade propellor type mixer.
Vert mixing chamber 14" dia x 16" deep.
Has manual plow.
Manual plow valve on 4" outlet.
variable speed motor
530 rpm min
W/controls and timers.

Bowl Diameter: 356 mm (14 in). Bowl Depth: 406 mm (16 in). Blade Type: 3 blade propellor. Bowl Jacket: Yes. Jacket Material: Carbon Steel. Controls: Yes.

Type: Mixer-Intensive

Manufacturer: Plastechnik Greiz

Model: MVA-1000R

Condition: Unused

Material: Stainless Steel 316

Capacity (Design): 1,000 L (264 gallons)

Motor Power: 30 kW (40.2 HP)

Trusioma high intensive mixer.
Jacket rated 0.05 mPA. 2-tier 2-blade impellor.
Total volume 1.0 cu M.
Approx working capacity 400 to 600 liters.
Top bolt cover with 1/3 hinged opening.
28-40 HP (22 to 30 KW), 3/50/220/380 volt,
740 to 1480 rpm
XP motor thru gear reducer.
Bowl 44.5 to 87 rpm.
200mm outlet w/manul gate valve.

Bowl Diameter: 1,440 mm (56.7 in). Bowl Speed (RPM): 87. Blade Type: 2-tier 2-blade. Bowl Jacket: Yes. Vacuum: Yes.

Type: Mixer-Intensive

Manufacturer: Jaygo

Model: DISHO V180/1300

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 1,300 L (343 gallons)

Motor Power: 14.9 kW (20 HP)

(317gallons)
Vacuum Mixing, Dispersing and Homogenizing Unit
with bolted dished top, cone bottom
Dispersing and Homogenizing Unit
Manufactured by Stainless Fabricators Inc
rated FV/25 psi @ 300 degrees F internal
fully insulated with SS shroud over insulation. With Top mounted dual motion agitator manufactured by Jaygo, has wide sweep with pitched blades and center shaft with pitched blades that intermesh with counter rotating wide sweep agitator.
3/60/230/460 volt motor
Vessel openings include: Top -14" manway with hinged cover, (3) 4"; (3) 1".
Vessel discharges into a horizontal DISHO homogenizing mill, multi chamber, driven by a 60 HP 3/60/230/460 volt motor. Complete skid mounted system with Intervac 5 HP water seal vacuum pump, controls and stainless steel enclosure for pump and mill drive.

Bowl Diameter: 1,118 mm (44 in). Bowl Depth: 1,829 mm (72 in). Blade Type: wide sweep & pitched perforated blade w/ side wall scraper. Pressure: 1.72 bar (25 psi). Temperature: 149 °C (300 °F). Bowl Jacket: Yes. Jacket Pressure: 6.89 bar (100 psi). Jacket Temperature: 149 °C (300 °F). Vacuum: Yes. Controls: Yes.

Type: Mixer-Intensive

Manufacturer: Henschel

Model: FM10

Condition: Used

Material: Stainless Steel 316

Capacity (Design): 10 L (2.64 gallons)

Motor Power: 1.8 kW (2.41 HP)

sanitary jkt high intensity mixer
SS 4-blade rotor, manual SS plow
Variable speed drive. CS str jkt.
Hinged top cover with 2 1/2" (63mm) sight glass w/light, 2-1/2" (12mm) jkt outlets, 1-2 1/4" (57mm) discharge.
On/off switch, safety cutoff switch on top cover.

Bowl Diameter: 230 mm (9.06 in). Bowl Depth: 230 mm (9.06 in). Blade Type: rotor mounted (4x) SS blades w/ manual plow. Bowl Jacket: Yes. Jacket Material: Carbon Steel. Controls: Yes.