Quote Cart
fine impact stud mill Unit has (1) rotary disc 13.6" (340mm) dia w/(136) 1/4" studs; (1) stationary disc w/(200) 1/4" studs. Vibrating pan feeder with 1/2 HP (0.39 KW), 3/50/500 volt, 2250 rpm motor. W/(1) spare pin-disc set. (1) set of beater discs. Unit is similar to Alpine UPZ mill.
Type: Pulverizer
Subtype: Granulator/Disintegrator
Manufacturer: Pallman
Model: PS8-126
Condition: Used
Material: Carbon Steel
Inlet Diameter: 1,300 mm (51.2 in)
Motor Power (Design): 110 kW (147.5 HP)
Type PS8-12/6 granulation system 800mm diameter x 1200mm long rotor with 6 removable blades, 6 removable stator knives. Rotor speed 315RPM. With (2) access doors 1280 mm x 650 mm Rotor speed 340 rpm. Feed 1300 mm x 600 mm with steel chute, discharge with steel chute. System includes an Aerzner blower type GL16.12, SR# 81013, pressure difference 5 PSI. Blower was driven by 50 HP 3/50/380/440V, 1470 RPM motor. (1) rotary lock valve on granulator discharge, SR# 5928, belt driven by 0.75 kW 3/50/220/250/380/440V, 1400 RPM motor via gearbox. With steel dust collector with fan and associated blower.
Speed (RPM): 340. Orientation: Horizontal.
Type: Pulverizer
Subtype: Granulator/Disintegrator
Manufacturer: Black Clawson
Condition: Used
Material: Carbon Steel
Inlet Diameter: 152.4 mm (6 in)
Motor Power (Design): 223.7 kW (300 HP)
Orientation: Horizontal.
Type: Pulverizer
Subtype: Granulator/Disintegrator
Manufacturer: Raymond
Model: 50
Condition: Used
Material: Carbon Steel
Outlet Discharge Diameter: 279.4 mm (11 in)
Inlet Diameter: 406.4 mm (16 in)
bare mill only. (no drive).
Air flow and power requirement are 6000 acfm,
Fan power 40 Hp.,
Mill power minimum 50 HP, maximum 100 HP.
The Imp mill is designed for low cost, dependable, grinding for fine to medium grinds.
Motor Power (Design): 74.6 kW (100 HP). Orientation: Horizontal.
Type: Pulverizer
Subtype: Granulator/Disintegrator
Manufacturer: Cumberland
Model: 812SE
Condition: Used
Material: Carbon Steel
Motor Power (Design): 3.7 kW (5 HP)
Orientation: Vertical
"A" series compact portable carbon steel steel granulator Throat size 200mm x 300mm cutting circle diameter 200mm, throughput approx. up to 300 lbs/hr, depending on type and form of material. Rotor with (3) carbon steel removable knives feed chute designed for hand, robot or conveyor feed, chute is hinged for easy access to knives, unit discharge into removable bin designed for beside the press granulation.