Stainless Steel 316 Blaw Knox Dryer-Rotary Vacuum - IPP# 100950

Type: Dryer-Rotary Vacuum

Manufacturer: Blaw Knox

Condition: Used

Material: Stainless Steel 304

Capacity Design: 3.54 m3 (125 ft3)

Capacity Working: 2.32 m3 (82 ft3)

4' diameter x 10' long chamber.
as 24" cored shaft with paddles and removable scrapers.
No drive available. Unit has chain guards for drive.
Top openings one 12", one 10 ".
Jacket openings are 2" NPT.
12" bottom discharge.

Diameter: 1,219 mm (48 in). Length: 3,048 mm (120 in). Height: 2,134 mm (84 in). Rated for Vacuum: Yes. Heat Transfer Surface Area: 11.7 m² (126 ft²). Agitation Seal Type: Packing. Jacket Material: Carbon Steel.

Type: Dryer-Rotary Vacuum

Manufacturer: Krauss Maffei

Model: DTB630C-List-Discotherm

Condition: Used

Material: Stainless Steel 316

Capacity Design: 0.72 m3 (25.4 ft3)

Capacity Working: 0.63 m3 (22.2 ft3)

vac dryer (cooler).
316SS shell
Total capacity 0.72 cbm
Shell 600mm (24") dia x 3.8m (12'6") long
Has 18" dia removable cored rotor.
Has 9" long scraper blades on shaft.
Has (17) fixed delumpers on str side of vessel.
Openings: top 2-24" w/bolt cover; btm 3-2", 2-8".

Diameter: 600 mm (23.6 in). Length: 3,800 mm (150 in). Height: 2,500 mm (98.4 in). Temperature: 50 °C (122 °F). Pressure: 6 bar (87 psi). Rated for Vacuum: Yes. Heat Transfer Surface Area: 14.3 m² (154 ft²). Orientation: Horizontal. Operational Mode: Continuous. Agitation: Yes. Jacket Material: Stainless Steel 304. Jacket Pressure: 7 bar (102 psi). Jacket Temperature: 50 °C (122 °F).

Type: Dryer-Rotary Vacuum

Manufacturer: Stokes

Model: 900-59-125

Condition: Used

Material: Stainless Steel 316

Capacity Design: 7 m3 (247 ft3)

Diameter: 1,219 mm (48 in)

jacketed rotary vacuum dryer
3/50/380 volt
Cleveland 63-55:1 ratio
3.8 HP, 1750 rpm gearbox
shaft cored for steam heating, no national board, rated 50 psi @ 300 degrees F
(1-straight side and 1-each end)
Rotary union joint, outboard bearings. Unit with dust collector. Openings: top (2) 3' x 18 1/2" hinged access covers with counter balanced mechanism, 2-12"; end 1-8"; bottom 1-10" with manual open/close mechanism; jacket 4-6", 4-2", 4-1", 4-3/4"; shaft 1-2", 1-1 1/2".

Length: 6,096 mm (240 in). Temperature: 149 °C (300 °F). Rated for Vacuum: Yes. Heat Transfer Surface Area: 23.3 m² (251 ft²). Shaft Cored and National Board Stamped: Yes. Orientation: Horizontal. Operational Mode: Batch. Agitation: Yes. Dust Collection: Yes. Jacket Material: Carbon Steel. Jacket Pressure: 3.45 bar (50 psi). Jacket Temperature: 149 °C (300 °F).

Type: Dryer-Rotary Vacuum

Manufacturer: Devine

Condition: Used

Material: Stainless Steel 316

Capacity Design: 2.83 m3 (100 ft3)

Capacity Working: 1.98 m3 (70 ft3)

Rotary vacuum dryer
Vessel rated for Full vacuum
12.5" diameter cored shaft with 24 fixed plows.
Outboard bearings with packing glands.

Diameter: 1,219 mm (48 in). Length: 3,048 mm (120 in). Rated for Vacuum: Yes. Heat Transfer Surface Area: 11.7 m² (126 ft²). Shaft Cored and National Board Stamped: Yes. Orientation: Horizontal. Agitation Seal Type: Packing. Jacket Pressure: 2.41 bar (35 psi). Jacket Temperature: 104 °C (220 °F).