Quote Cart
Rotary vacuum dryer
54" dia x 10' long shell.
16" dia charge port w/cover
10" center btm outlet.
Bolt flat heads w/2-4" end discharge.
16" x 22" end opening w/bolt cover.
Approx 8" x 8" sq hollowshaft w/SS paddles, gear driven.
No motor.
Type: Dryer-Rotary Vacuum
Manufacturer: Devine
Condition: Used
Material: Stainless Steel 304
Capacity Design: 3.77 m3 (133 ft3)
Capacity Working: 2.83 m3 (100 ft3)
54" dia x 10' long shell
16" dia charge port w/cover, 16" dia hydraulic operated center btm outlet.
Bolt flat ends. Approx 8" dia SS hollowshaft w/SS paddles.
Diameter: 1,372 mm (54 in). Length: 3,048 mm (120 in). Rated for Vacuum: Yes. Heat Transfer Surface Area: 13.1 m² (141 ft²). Orientation: Horizontal. Agitation: Yes. Jacket Material: Carbon Steel. Jacket Pressure: 3.45 bar (50 psi). Jacket Temperature: 204 °C (400 °F).
Type: Dryer-Rotary Vacuum
Manufacturer: Devine
Condition: Used
Material: Stainless Steel 316
Capacity Design: 2.83 m3 (100 ft3)
Capacity Working: 1.98 m3 (70 ft3)
Rotary vacuum dryer
Vessel rated for Full vacuum
12.5" diameter cored shaft with 24 fixed plows.
Outboard bearings with packing glands.
Diameter: 1,219 mm (48 in). Length: 3,048 mm (120 in). Rated for Vacuum: Yes. Heat Transfer Surface Area: 11.7 m² (126 ft²). Shaft Cored and National Board Stamped: Yes. Orientation: Horizontal. Agitation Seal Type: Packing. Jacket Pressure: 2.41 bar (35 psi). Jacket Temperature: 104 °C (220 °F).
Type: Dryer-Rotary Vacuum
Manufacturer: Devine
Condition: Used
Material: Stainless Steel 316
Capacity Design: 1.13 m3 (40 ft3)
Capacity Working: 0.85 m3 (30 ft3)
w/single ribbon type agit
no int rating
32" dia x 8' long shell
Bolt flat heads w/1-2" opening
16" dia charge port
12" dia center btm discharge
No drive or motor
Diameter: 813 mm (32 in). Length: 2,438 mm (96 in). Rated for Vacuum: Yes. Heat Transfer Surface Area: 12.6 m² (136 ft²). Orientation: Horizontal. Agitation: Yes. Jacket Material: Carbon Steel. Jacket Pressure: 3.45 bar (50 psi). Jacket Temperature: 149 °C (300 °F).
Type: Dryer-Rotary Vacuum
Model: 1.2-4-DBK
Condition: Unused
Material: Stainless Steel 304
Capacity Design: 3.99 m3 (141 ft3)
Capacity Working: 1.98 m3 (70 ft3)
304SS shell with CS jacket
Openings: top 1-14", 1-12", 1-24" w/28" dia x 36" str side air receiver
Center btm discharge 1-12"
Rotor speed 6 rpm
Diameter: 1,219 mm (48 in). Length: 3,962 mm (156 in). Pressure: 2 bar (29 psi). Heat Transfer Surface Area: 15.1 m² (163 ft²). Shaft Cored and National Board Stamped: Yes. Agitation: Yes. Agitation Seal Type: Packing. Jacket Material: Carbon Steel. Jacket Pressure: 8.14 bar (118 psi).