Quote
Quote Cart
clear all items
All Equipment Filters

Filters - Used and Surplus Inventory | IPP

Used filters for sale: industrial solid-liquid separation for consistent, high-purity output

Searching equipment…
Active Filters
Equipment
Manufacturer: Rosenmund
Filter
Clear all filters

Top Filters in stock

Highest-ranked available inventory for this selection.

Select a Filter type

Choose a subtype for a more focused set of listings.

Narrow these listings

Specifications

Available Filters

Showing 6 of 6 matching Filters.

Stock Number: #705428
Filtration Area: 0.6 m²
Diameter: 34.9 in
Pressure: 90 psi
Temperature: 450 °F
Jacket: Yes
Jacket Pressure: 150 psi
Jacket MOC: Stainless Steel 304
Jacket Temperature: 450 °F
Additional Information: Internal working pressure 90 psi and full vacuum @ -20/+450 degree F, jacket 150 psi @ -20/+450 degree F.Filter plate 150 psi @ -20/+450 degrees. F,total volume 150 gallon, max solids volume 47.5 gallon, stroke pressure shovels 12", 316L stainless steel filterplate304L stainless steel jacket. Paddle speed approx 5-35 rpm, packed gland on shaftAgitator raise and lower mechanism driven by same powerpak. Center bottom discharge with hydraulic valve. Heated filter perforated plate with hydraulic lowering ramMax capacity vessel 17 cubic feet, jacket 1.9 cubic feet, filter plate 0.3 cubic feet, built on control panel with agitator speed control, raise/lower speed control, counter pressure control, discharge tube open/close switch, base open/close switch, pressure gauge, and emergency stop button. Fabricate under license from Rosenmund by Gaston County. Gaston County serial # F80019-588-1. • Can be used with 248331 APOVAC system for vacuum at an additional cost.
More Details ⟶
Stock Number: #219220
Filtration Area: 8 m²
Diameter: 3,250 mm
Pressure: 3 psi
Temperature: 165 °F
Jacket: Yes
Jacket Pressure: 5 bar
Jacket Type: Half Pipe/Limpet
Jacket Temperature: 165 °C
Additional Information: CODAP 85, center bottom discharge design Non-cored shaft internal pressure -1/3 bar @ -15/165 deg C;, jacket -1/5 bar @ -15/165 deg C With 316L (1.4435) stainless steel half pipe coil jacket on straight side cover with a shroud Designed for cake thickness 500 mm Vessel is 13200 liter volume Includes hydraulic controls and vacuum pump skid.
More Details ⟶
Stock Number: #230453
Filtration Area: 0.3 m²
Pressure: 6 bar
Temperature: 200 °C
Jacket: Yes
Additional Information: Agitated Pressure Filter The 24.5 Liter vessel is rated -1/6 Bar @ -20 to 200 degree C The 2.7 Liter jacket is rated -1/6 Bar @ -20 to 200 degree C. The .3 Liter Heated Base is rated -1/6 Bar @ -20 to 200 degree C. With Bergmann mechanical seal on shaft, and CIP ports with spray balls for cleaningSide bottom solids discharge with manual flush valve, center bottom fluid outlet with manual ball valve. Clamped bottom head for removing heals. Comes with portable hydraulic power pack, that utilizes a piston pump for up/down and right/left agitator movement. Power pack has AB electric controls Filter housing is mounted on a stainless steel frame with castors, and the hydraulic power pack is also on castors, making the entire unit portable.
More Details ⟶
Stock Number: #219221
Filtration Area: 8 m²
Diameter: 3,250 mm
Pressure: 3 bar
Temperature: 165 °C
Jacket: Yes
Jacket Pressure: 5 bar
Jacket Type: Half Pipe/Limpet
Jacket Temperature: 165 °C
Additional Information: center bottom discharge design internal pressure -1/3 bar @ -15/165 deg C; jacket -1/5 bar @ -15/165 deg C. Non-cored shaft Designed for cake thickness 500 mm Vessel is 13200 liter volume jacket volume is 75 liters
More Details ⟶
Stock Number: #205289
Filtration Area: 0.03 m²
Pressure: 87 psi
Temperature: 392 °F
Jacket: Yes
Jacket Pressure: 147 psi
Jacket Temperature: 392 °F
Additional Information: Manually operated rake 2 to 5 KG of cake volume 30.44 liters coil volume is 2.57 liters Maximum capacity 3 gallons (11 liter) Gaskets are Teflon
More Details ⟶
Stock Number: #219219
Filtration Area: 8 m²
Diameter: 3,250 mm
Pressure: 3 bar
Temperature: 165 °C
Jacket: Yes
Jacket Pressure: 5 bar
Jacket Type: Half Pipe/Limpet
Jacket MOC: Stainless Steel 316
Jacket Temperature: 165 °C
Additional Information: Codap85 center bottom discharge design Includes hydraulic controls and vacuum pump skid. 316L stainless steel half pipe coil jacket on straight side cover with a shroud jacket volume is 75 liters. jacket -1/5 bar Non-cored shaft. Rated: internal pressure -1/3 bar Designed for cake thickness 500mm.
Vessel is 13200liter volume Includes hydraulic controls and vacuum pump skid
More Details ⟶

Shop used, secondhand and surplus filters from IPP – in stock and engineered for chemical, pharmaceutical, and food-grade applications

Streamline your process with IPP’s ready-to-ship filters designed to reduce waste, recover product, and meet regulatory standards

Used filters are essential components in countless process operations where solids must be separated from liquids. Whether you’re removing fine particulates, clarifying solutions, or recovering valuable materials, industrial filters play a critical role in improving product quality, protecting downstream equipment, and maintaining compliance. With more than 47 years of experience, IPP supplies used, secondhand, and surplus filters from 20 global plant sites and maintains an extensive inventory of 15,000+ process systems.

IPP stocks a wide range of filter types—pressure leaf, plate and frame, cartridge, vacuum drum, nutsche, and candle filters—from leading brands like Sparkler, Pall, Funda, and Millipore.

Primary uses across industries

  • In chemical processing, for separating solids from liquids in catalyst recovery, resin filtration, and acid clarification
  • In pharmaceuticals, for sterile filtration of intermediates, APIs, and final formulations
  • In food and beverage, for wine clarification, edible oil filtration, and sugar refining
  • In environmental and wastewater, for sludge dewatering and contaminant removal

Types of materials processed

  • Slurries, suspensions, and solutions with fine particulates
  • Heat-sensitive or viscous liquids requiring gentle handling
  • Solvent-based, aqueous, or corrosive mixtures

Common materials of construction

Industrial filters are built to resist corrosion, handle pressure, and maintain hygiene:

  • Stainless steel for sanitary, pharma and food-grade use
  • Carbon steel for robust chemical and utility processes
  • Hastelloy, titanium or lined steel for aggressive media or high-purity applications

Key features of process filters

  • Multiple filter formats to match flow rate and solids content
  • Jacketed options for temperature-sensitive operations
  • ASME code-rated vessels available for pressure applications
  • Options for automated cake discharge or backflushing
  • Compact, modular systems designed for integration and easy maintenance

Learn more about industrial filtration technologies and applications from Chemical Processing.

Find your industrial filter at IPP

Search the IPP inventory or contact IPP’s filter experts to locate the right used, surplus, or secondhand filter for your process. With trusted manufacturers, quality systems, and rapid delivery, IPP helps you reduce downtime and improve filtration efficiency.

Filter FAQ

Have questions about Filters or our services? Learn more about our products and why customers choose IPP.

What’s the difference between pressure leaf and plate and frame filters?
Pressure leaf filters offer continuous, enclosed operation ideal for fine filtration, while plate and frame units are great for batch operations and easier cake discharge.
Are used filters suitable for pharmaceutical or food processing?
Yes – many are built to sanitary standards and can be revalidated or retrofitted with new filter media and gaskets.
What factors should I consider when selecting a filter?
Key factors include particle size, solids concentration, flow rate, operating pressure, temperature, and chemical compatibility.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP offers significant savings, reduced lead times, and global support based on more than 47 years of equipment expertise.