New and Used Equipment

pressure internal rated 0.5 bar and full vauumc @ 220 degrees C. Jacket 13 bar @ 220 degrees C, Shell 850mm diameter x 4800mm long,

thin film continuous contact dryer (cooler) Jkt rated 8 bar @ 50 deg C Shell 600mm dia (24") x 4.492m (177") long

thin film evaporator jacket -1/1.1 bar @ 350 deg C (110ltr) 316L s/steel (1,4404) chamber, c/steel jacket on straight side only, 316L s/steel rotor, Crane 109 double mechanical seal with lubricator, speed 191 rpm, belt driven by 22kw, 3/50/380 volt, 730 rpm motor

Jkt rated 13 bar @ 220 deg C Shell 850mm (34") dia x 4800mm (15.8') long, Rotor driven by 30 KW, 3/50/380 volt, 260 rpm output speed.

Shell rated at FV/16 psi at 662 degrees F. jacket rated at FV/93 psi at 662 degrees Sako Thin Film type. Stainless steel rotor. Requires 40 HP drive system.

jacket rated 3 ATU @ 140 deg C Entrainment separator 900mm diameter x 1057mm long. Rotor speed 350 rpm. Mechanical seal on shaft. no V-belt motor. Conical section 730mm long

thin film continuous contact dryer (cooler). Jacket rated 8 bar @ 50 degrees C, Shell 600mm diameter x 4492mm long.

Jacket rated 8 bar @ 50 degrees C, Shell 600mm diameter x 4492mm long.

jkt rated 16 kg/sq cm @ 200 deg C. 9 gal capacity W/(2) rows of str blades and (2) rows of positive pitched blades @ 25 deg angle on central core. Driven by 20 HP, 1170 rpm Reeves variable speed drive, 6.2:1 ratio, 64 rpm min, 428 rpm max. C-configuration. Has air operated valve positioner w/mech seal. Has jkt btm cone; rotor extension (removable product propelling rotor section).

jacketed thin ‘filmtruder’ evaporator system, internal pressure -1/3.2 bar @ 200 degrees C (3900 liter), top jacket 7 bar @ 200 degrees C (11 liter), straight side jackets 7 bar @ 200 degrees C (3 x 65 liter), bottom cone jacket 7 bar @ 200 degrees C (9 liter), built to TUV, (3) 316L stainless steel jackets on straights side, coned bottom with 316L stainless steel jacket, 750mm diameter x 4850mm long 316Ti stainless steel (1.4571) rotor, rotor driven by a 45/54kw, 3/50/60/380-420/440-480 volt, 1475/1765 rpm motor via a reduction gearbox, mechanical seal, approx 850mm internal diameter, clamped flat top, bottom outlet with a pneumatic operated ball valve, evaporator mounted on carbon steel lugs and in a carbon steel structure, system includes: (1) 8.52 square meter 316L stainless steel (1.4404/1.4435) tube, head and shell vertical condenser, manufactured by Luwa SMS, fabrik #4826102, pressure tube side vacuum @ 55 degrees C (100 liter), shell 6 bar @ 90 degrees C (224 liter), (16) 44.5mm diameter x 2 x 4m long 316L stainless steel tubes, single pass, 324mm diameter 316L stainless steel shell, 4751mm overall length, 316L stainless steel tubesheets, (2) 316L stainless steel dished heads, mounted on lugs, (1) vacuum pump, (1) liquid separator

(3) evaporator sections Separator section 48" dia. Int rated full vac, jkt rated 150 psi @ 393 deg F. Cone btm not jkt. 4-blade rotor. Belt driven by 15 HP, 3/60/220/440 volt, 1140 rpm motor, UL label. Rotor 380 rpm.

2.25" shaft, seal housing for a wiped film evaporator. Mechanical seal with cooling lines. 2.25" shaft with key way.

thin film evaporator Equipped with 6 blade fixed rotor Packing gland on shaft. Entrainment separator 500 mm Diameter no pulley and Motor.

thin film evaporator Equipped with 6 blade fixed rotor no Motor. Entrainment separator 500 mm Diameter Packing gland on shaft, with conical bottom

jacketed wiped film evapaorator jacket 2.76 bar @ 250 deg C, 4- sections of carbon steel limpet coils on body and bottom cone,Rotor with 4-fixed blades (unused Hastelloy C276 spare rotor available) rotor belt driven by 18.5 kw, 3/50/415 volt, 975 rpm Ex motor chamber 600mm diameter x 5m staright side

jacketed wiped thin film evaporator with column and condenser pressure internal -1/3 bar @ 250/350 deg C (38ltr) jacket 29.6/26.9 bar @ 250/350 deg C (6ltr) s/steel jacket on straight side only, rotor belt driven by 1.5 kw 3/50/500 volt 710rpm Exd 3nG5 motor, Crane 109 mechanical seal, evaporator with (1) 300mm diameter x 1.8m high 316L s/steel jacketed packed column, manufactured by Dynamite Nobel, fabrik #521, pressure internal: 13 bar + vak @ 200 deg C (140ltr), jacket: 8 bar @ 200 deg C (30ltr), internal coil 8 bar @ 200 deg C (2.5ltr), bolt flat top, weld dsihed bottom, 300mm diameter x 1020mm high packing section, Sulzer packing, (1) 1.2 sqm 316L s/steel (1.4571) tube, shell and head vertical jacketed heat exchanger, pressure tube side: 6 bar @ 200 deg C (40ltr), shell side: 3 bar + vak @ 200 deg C (50ltr), jacket: 8 bar @ 200 deg C 925ltr), (34) 25mm diameter x 2mm x 2.5m long 316L s/steel tubes, shell 250mm diameter x 2140mm total length, (1) dished head, (1) flat bonnet head, all parts are TUV certified

Luwa wipe film evaporator jacket 4 bar, c/steel jacket 2 x 340mm diameter x 1.1m long clamped sections

thin film continuous contact dryer (cooler). Jkt rated 8 bar @ 50 deg C, Shell 600mm dia (24") x 4.492m (177") long.

thin film continuous contact dryer (cooler). Jkt rated 8 bar @ 50 deg C, Shell 600mm dia (24") x 4.492m (177") long.

thin film continuous contact dryer (cooler). Jkt rated 8 bar @ 50 deg C, Shell 600mm dia (24") x 4.492m (177") long. Rotor driven by 25 KW, 3/50/380 volt motor, 260 rpm output speed.

thin film continuous contact dryer (cooler) Jkt rated 8 bar @ 50 deg C Shell 600mm dia (24") x 4.492m (177") long

thin film continuous contact dryer. pressure internal 0.5 bar and full vacuum @ 220 degrees C. Jacket rated 13 bar @ 220 degrees C, Shell 850mm diameter x 4800mm long, Rotor was driven by 30 KW, 3/50/380 volt, 260 rpm output speed.

wiped film evaporator/filmtruder body only.

jkt rated 227 psi @ 392 deg F.

thin film continuous contact dryer (cooler) Jkt rated 8 bar @ 50 deg C Shell 600mm dia (24") x 4.492m (177") long

thin film continuous contact dryer Jkt rated 10 bar @ 200 deg C Shell 1000mm (40") dia x 6008mm long Rotor speed 80/160 rpm