Pump-Vacuum - IPP# 247305

Type: Pump-Vacuum

Manufacturer: SIHI

Model: LEHA 1800 AB X3X WU P

Condition: Used

Material: Stainless Steel 316L

Air Flow: 1,450 m3/h (868 CFM)

Discharge Pressure: 1.01 bar (14.7 psi)

583 m3/hr @ 33 mbar, 1474 m3/hr @ 900 mbar, 980 rpm, ATEX Ex II 2G c/k classification, pump driven by approx 45kW, 3/50/400 volt 980 rpm Ex motor,

including (1) 270 liter 316L stainless steel vertical liquid separator, manufactured by HS ApparateTechnik Gmbh, serial #048/11936/2.1+2.2, internal pressure -1/0.5 bar @ -20/90 degrees C, weld dished top and bottom, 500mm diameter x 1210mm straight side, mounted on legs,

(1) 4 square meter 316L stainless steel tube, head and shell horizontal condenser, manufactured by E.Prang & Co, serial #53779-53780, pressure tube side -1/0.5 bar @ 0/150 degrees C (23.8 liter), shell side 0/10 bar @ 0/90 degrees C (49 liter),

also includes interconnecting pipework, valves etc,

Orientation: Horizontal. Inlet Diameter: 125 mm (4.9 in). Outlet Diameter: 125 mm (4.9 in). Seal Type: Liquid Ring. Temperature: 15 °C (59 °F).

Type: Pump-Vacuum

Manufacturer: SIHI

Model: CEHE-3601

Condition: Used

Material: Stainless Steel 316

Air Flow: 5 m3/h (2.9 CFM)

Inlet Diameter: 38.1 mm (1.5 in)

Water seal vacuum pump Packing glands on shaft. 3/50/220/380 volt, 25m HD single stage. Openings: top 1-1 1/2"; end 1-2".

Outlet Diameter: 50.8 mm (2 in). Seal Type: Liquid Ring. Cooling or Seal Water: Yes.

Type: Pump-Vacuum

Manufacturer: SIHI

Model: PIW 14000/2

Condition: Used

Material: Stainless Steel 316

Air Flow: 11,000 m3/h (6,450 CFM)

Discharge Pressure: 0.001 bar (0.015 psi)

Orientation: Horizontal. Inlet Diameter: 250 mm (9.8 in). Outlet Diameter: 150 mm (5.9 in). Seal Type: Liquid Ring.

Type: Pump-Vacuum

Manufacturer: SIHI

Model: PIW 14000/2

Condition: Used

Material: Stainless Steel 316

Air Flow: 11,000 m3/h (6,450 CFM)

Discharge Pressure: 0.001 bar (0.015 psi)

1 mbar System includes: 350 m3/Hr @ 33 to 0 mbar SIHI type LPHA 55320, Serial Number BN BFK42.4, Pump Number D005187903 Mounted above the SIHI vacuum pump is a SIHI Sterling CS Vacuum booster, rated 4000 m3/Hr, 11KW, type WNMY4000, Pump Number D72951 0106, driven by a 11 Kw Loher E-motor, type DNGW-160LB-04A, 500 volt, 50 cycle, 2930 U/min This booster discharges directly into the suction inlet of a second SIHI Rotary lobe booster rated 14000 m3/Hr direct coupled to a 30 KW motor Skid mounted system includes a 1.730mm diameter x 2.940 mm long separator tank, a plate heat exchanger used as a cooler, and a 110 liter Stainless steel separator tank rated 0,5 bar @ 100 degrees C. Total package dimensions are 2.940 mm long x 1.730 mm wide with separator and plate heat exchanger x 3.315 height over all, total weight including the carbon steel frame 5.200 Kg.

Orientation: Horizontal. Inlet Diameter: 250 mm (9.8 in). Outlet Diameter: 150 mm (5.9 in). Seal Type: Liquid Ring.