Air Flow
Measure
Quote Cart
Used vacuum pumps for sale: cost-effective solutions for industrial vacuum applications
Highest-ranked available inventory for this selection.
Used vacuum pumps for sale: cost-effective solutions for industrial vacuum applications
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Use this setting to include or exclude equipment with this feature.
Showing 25 of 267 matching Vacuum Pumps.
Nash SC2SS Vacuum pump, with vapor recovery system Test # 90Y002 The system includes the following equipment; a vacuum pump, two heat exchangers, a separating tank, and seal pots. The direct drive vacuum pump, is manufactured by Nash, size SC2SS, Pos. 4 ,Vac, rated 200 cfm @ 5-20" Hg. The vapor exchanger is a 30 sq. ft., all 316 SS, horizontal heat exchanger manufactured by Industrial Process Equipment corp., Model # 2ST8-60, Serial # 105-641A National Board # 988 It’s shell and tubes are rated for 150/FV The condensate chiller is a 10 sq.ft., 316SS tube bundle, 316SS heads, with CS shell, horizontal heat exchanger and is also manufactured by Industrial Process Equipment Corporation. Serial # 1056413, and National Board # 989, Rated for 150/FV psi in the shell and tubes. The dual seal pot arrangement, with Nitrogen purge is provided by Duramettalic, Canada/Condex Heat Transfer Corp. Serial # 91-3-4146 & 4179, and rated for 400 psi at 400 degrees F. Both have level sight glasses and N2 purge line with regulator and Liquid make up valves. The units 316 SS separator, is manufactured by Jenco, Serial # 91-1327, National Board # 525, and rated for 30/FV at 350 psi. The separator tank also has a liquid level sight glass. The vapor inlet line is 4" flanged, and separator outlet is 1”. Automatic valves for liquid flow control are provided by Fisher and El-O-Matic, and the vapor contact piping is 316 SS. System includes all DP cells, RTD temperature probes, and pressure gauges. Designed to be used in a hazardous atmosphere, skid has a 60 amp Square D breaker, and explosion proof switches and controls.
SIHI vacuum skid consisting of (1) 140m3/hour carbon steel liquid ring vacuum pump 3 bar (1) 4 liter carbon steel separator vessel, pressure -1/3 barg @ 120 degrees C 273mm diameter x 1020mm total height, (1) 9.9 square meter carbon steel condenser, pressure tube side 6 barg @ 250 degrees C, shell -1/3 barg @ 250 degrees C,
System with Knock out pot and heat exchanger. 25 Gallon 304 SS, receiver by J D. Cousins, rated for FV 75 psi at 350 degrees F. 30 Gallon condensate receiver, by TMT, Carbon steel, vertical, 12.75" x 38". 69 Sq.Ft. Hastelloy tube, tube sheet and head, CS shell, vertical heat exchanger shell rated for 100 psi at 300 degrees F, tubes rated for FV/100 psi at 300 degrees F.
Part number: BN117 4 Additional equipment: vacuum receiver SIHI stock number 900256, mechanical seals on shaft with vacuum receiver
Sihi Dry vacuum pump skid with a Roots booster pump Manufactured by Sterling Fluid systems SIHI dry H400/2000 roots input 400 volt, IP55 protection pressure 10mbar @ 0/40 degrees C, protection Ex II IG/2G IIB3/IIC T3 skid includes (1) 400m3/hr dry running SIHI vacuum pump, (1) booster pump, driven by 4kW, 3/50-60/400 volt EExde II CT4 motor, (1) stainless steel welded plate heat exchanger, manufactured by Vahterus, serial #32587, design pressure plate side 1/12 bar @ 50/250 degrees C, shell side 1/12 bar @ 50/250 degrees C, (1) 25liter stainless steel horizontal condensate vessel, manufactured by HS Apparatetechnik, serial #048/11620/1, design pressure 6 bar @ 100 degrees C,
single stage design, suction pressure atmospheric to 0.147 barg, absorbed power 43kw,1150 rpm pump speed, John Crane mechanical seal,
with (1) 1300 liter carbon steel vertical separator tank, manufactured by , pressure 5 bar + full vacuum @ -13/150 degrees C, 1m diameter x 1.6m straight side, weld dished top and bottom, mounted on legs,
(1) 10.5 square meter carbon steel tube, head and shell horizontal heat exchanger (seal water cooler), manufactured by , design pressure tube side 7 bar @ 80 degrees C, shell 7 bar @ 80 degrees C, (52) 16mm diameter x 1.5mm x 4m long carbon steel tubes, 4 pass tubeside, 1 pass shell side, 200mm diameter carbon steel shell, 4568mm overall length, (1) carbon steel bonnet head, (1) carbon steel channel head with flat end plate, mounted on fixed saddles
(1) 10m3/hr @ 20m head carbon steel centrifugal pump, manufactured by Worthington, type I HNN 111, discharge pressure 3 bar, mechanical seal, mounted on a baseplate
Skid mounted system with receiver, and cooler(heat exchanger) for seal water. Steam Jet requires 100 psi steam
single stage design, suction pressure atmospheric to 0.147 barg, absorbed power 43kw,1150 rpm pump speed, John Crane mechanical seal,
with (1) 1300 liter carbon steel vertical separator tank, manufactured by , pressure 5 bar + full vacuum @ -13/150 degrees C, 1m diameter x 1.6m straight side, weld dished top and bottom, mounted on legs,
(1) 10.5 square meter carbon steel tube, head and shell horizontal heat exchanger (seal water cooler), manufactured by , design pressure tube side 7 bar @ 80 degrees C, shell 7 bar @ 80 degrees C, (52) 16mm diameter x 1.5mm x 4m long carbon steel tubes, 4 pass tubeside, 1 pass shell side, 200mm diameter carbon steel shell, 4568mm overall length, (1) carbon steel bonnet head, (1) carbon steel channel head with flat end plate, mounted on fixed saddles
(1) 10m3/hr @ 20m head carbon steel centrifugal pump, manufactured by Worthington, type I HNN 111, discharge pressure 3 bar, mechanical seal, mounted on a baseplate
single stage, suction pressure atmospheric to 0.068 barg, absorbed power 26kw, John Crane mechanical seal,
with (1) 240 liter carbon steel vertical separator tank, manufactured by , pressure atmospheric @ 80 degrees C, 500mm diameter x 1.2m straight side, weld dished top and bottom, mounted on legs,
(1) 4.52 square meter carbon steel tube, head and shell heat exchanger (seal water cooler), manufactured by , design pressure tube side 7 bar @ 80 degrees C, shell 5.25 bar @ 80 degrees C, (30) 16mm diameter x 1.5mm x 3m long carbon steel tubes, 2 pass tubeside, 1 pass shell side, 150mm diameter carbon steel shell, 3464mm overall length, (1) carbon steel bonnet head, (1) carbon steel channel head with flat end plate, mounted on fixed saddles
single stage, suction pressure atmospheric to 0.068 barg, absorbed power 26kw, John Crane mechanical seal,
with (1) 240 liter carbon steel vertical separator tank, manufactured by , pressure atmospheric @ 80 degrees C, 500mm diameter x 1.2m straight side, weld dished top and bottom, mounted on legs,
(1) 4.52 square meter carbon steel tube, head and shell heat exchanger (seal water cooler), manufactured by , design pressure tube side 7 bar @ 80 degrees C, shell 5.25 bar @ 80 degrees C, (30) 16mm diameter x 1.5mm x 3m long carbon steel tubes, 2 pass tubeside, 1 pass shell side, 150mm diameter carbon steel shell, 3464mm overall length, (1) carbon steel bonnet head, (1) carbon steel channel head with flat end plate, mounted on fixed saddles
SIHI vacuum skid carbon steel liquid ring vacuum pump 33 mbar 380/660 volt (1) 60 liter carbon steel separator vessel, pressure 3 barg @ 120 degrees C (1) carbon steel condenser, 170mm diameter x 2130mm long, no nameplate
7.7 x 10-4 Torr Two Stage Oil seal Size: DA132MB-D Rotary Vane Mechanical Vacuum Pump 495 lbs
liquid ring design with a total recirculation system type 309-302, SIHI Drawing number SV1677. System includes a 4" diameter x 30" long, and a gas/liquid seperator/service liquid tank, CS 20" diameter x 45" straight side, rated 16psi @ -20 to 200 degrees f.
Pressure: 200 mbar With SIHI two stage water seal vacuum pump Typ: SIHI, LPHE 45316 driven by 3.0kW 3/50/380V, 1440 RPM motor. Mounted on unitized base.
1 mbar
mechanical seals on shaft (2) 1.5" inlets, (2) 1.5" outlets Direct coupled to a 10 HP Motor.
SIHI vacuum skid consisting of (1) 110m3/hour carbon steel liquid ring vacuum pump 30/1100 mbar (1) 6 liter carbon steel separator vessel, pressure -1/3 barg @ 120 degrees C, 273mm diameter x 1.2m high, (1) 2.85 square meter carbon steel condenser, pressure tube side 6 barg @ 120 degrees C, shell -1/3 barg @ 120 degrees C
Used vacuum pumps from IPP encompass a wide range of machinery essential for creating and maintaining vacuum environments across various industries. Whether you require rotary vane, liquid ring, or dry screw vacuum pumps, IPP offers equipment that meets your specific needs. With over 47 years of industry experience, IPP supplies used, surplus, and secondhand vacuum pump equipment from 20 global plant sites and maintains a ready-to-ship inventory of 15,000+ process systems.
IPP stocks equipment from leading manufacturers such as Nash, Kinney, Busch, and Leybold, ensuring quality and reliability.
To ensure durability and compliance, vacuum pump equipment is typically constructed from:
Discover how used vacuum pumps can enhance your processing efficiency at Machinery & Equipment Co.
Browse IPP inventory or contact IPP’s vacuum pump equipment specialists to find the right used, surplus, or secondhand machinery for your operations. From individual units to complete systems, IPP helps you achieve your production goals efficiently and cost-effectively.
Have questions about Vacuum Pumps or our services? Learn more about our products and why customers choose IPP.
