Quote Cart
Centrifugal compressor with eight impellers Inlet pressure 358 psia, inlet temperature 50 degrees F. This compressor has an average compressibility factor of 1.013 Cooling water temperature is 85 degrees F, and after intercooling is 100 degrees the first critical speed is 5,400 rpm. The compressor rpm is 10,440, with a bhp of 8228 Up connected intake and discharge flanges, the suction is 10" and the discharge is 8" . The case design pressure is 1000 psi for the inlet and discharge. This compressor has a common lube system with other pieces in the train and two ring oil seals. Originally driven by a steam turbine (not included).
Type: Compressor
Subtype: Centrifugal
Manufacturer: Dresser Rand
Model: D18R6B
Condition: Unused
Compressor Type: Centrifugal
Inlet Pressure: 1.44 bar (20.9 psi)
Wet Gas Compressor Radial Split case two stage compressor motor through a Lufin gear reducer
The Datum compressor is an 18 frame size(inside case diameter) with a radial split case, six impellers and a back to back rotor design. The machine features a lube skid that supports the compressor, motor and gear, a gas skid for the double Dry Gas seals, and instrumentation for vibration and temperature detection.
MMSCFD Dry: 49.73; Lbs/Hr Wet: 224,820;
Inlet PSIA: 20.9; Inlet Temp: 106 Degree F; Inlet ACFM Wet: 24,183
Designed for Outdoor Use, Under roof.
All Electricals are Class 1, Group CD, Division 2.
Speeds: Maximum Continuous 5,653 RPM,
Trip Speed 5,719,
CCW rotation from drive end. With one piece shaft.
Motor, Gear reducer, and Compressor skid mounted.
Lufkin Gear reducer, 3.178:1 ratio, rated 10,300 HP.
The Oil control system is by Cobey, and skid mounted.
The Seal gas system and skid are by Flowserve.
Discharge Pressure: 13.4 bar (193.7 psi). Flow Rate: 41,087 m3/h (24,183 CFM). Speed (RPM): 5,653.
Type: Compressor
Subtype: Centrifugal
Manufacturer: Atlas Copco
Model: 1616 6551 80
Condition: Unused
Material: Carbon Steel
Compressor Type: Centrifugal
Air end compressor head Part # 1616 6551 GA55 GBD- part # 2901-0844-00.
Type: Compressor
Subtype: Centrifugal
Manufacturer: Clark
Model: 2M8-6
Condition: Used
Material: Carbon Steel
Compressor Type: Rotary
Inlet Pressure: 0.97 bar (14.1 psi)
4,079 acfm rotary air compressor Direct driven by a steam turbine (IPP# 212810) through a gear reducer (IPP# 212811) Pressure Suction 14.07 6400 rpm critical speed 12"" inlet X 10"" discharge Nozzle orientation is up
Discharge Pressure: 33.8 bar (490 psi). Flow Rate: 6,930 m3/h (4,079 CFM). Inlet Diameter: 304.8 mm (12 in). Speed (RPM): 10,211.
Type: Compressor
Subtype: Centrifugal
Manufacturer: Clark
Model: 4M8-7
Condition: Used
Material: Carbon Steel
Compressor Type: Centrifugal
Inlet Pressure: 2 bar (29 psi)
11,763 ACFM with seven impellers inlet temperature is 24 degrees F. The average compressibility factor is 0.979. The nozzle orientation up The compressor rpm is 5,875 rpm, with a maximum speed of 6,220 rpm and a first critical speed of 3,000 rpm. Compressor HP is 1,574. Designed to be driven by a steam turbine (IPP# 212817) with a speed increaser (IPP # 212818).
Discharge Pressure: 4.1 bar (60 psi). Flow Rate: 19,985 m3/h (11,763 CFM). Speed (RPM): 6,220.