Heat Transfer Surface Area
Measure
Quote Cart
Used heat exchangers for sale: efficient thermal transfer systems for heating, cooling and energy recovery
Highest-ranked available inventory for this selection.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Use this setting to include or exclude equipment with this feature.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Enter a keyword to match this specification.
Set a numeric threshold to narrow the matching listings.
Set a numeric threshold to narrow the matching listings.
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Enter a keyword to match this specification.
Enter a keyword to match this specification.
Showing 9 of 9 matching Shell and Tube.
Rated FV/300 psi @ -20 to 425 degrees tube side; FV/50 psi @ -20 to 425 degrees F shell side.
with glass lined clamped heads Tube Number: 18. Tube Diameter: 0.75 in. Tube Length: 216 in.
2.5% Tung tubes (Non code) with TA liner silver brazed to tube sheet, glass lined carbon steel heads (tubes are roller expanded into grooves and seal welded to tube sheet face) 8 x 4 concentric reducer on one end and 8 x 4 eccentric reducer on other end. 4" thick foam glass insulation covered with 12 GA 316 L sheathing on the shell side only. Sheathing has a 50 RA finish with vent & drain. Six, PTFE Teflon (1/4" thick) baffles @8" spacing face to face. Length: 82.1 in. Shell-side Passes: 1. Tube-side Passes: 1. Tube Type: Straight Tube. Tube Number: 26. Tube Diameter: 0.75 in. Tube Length: 57 in. Tube Thickness: 0.015 in. Nozzle Schedule: Nozzle schedule : (1) 3" top left. (1) 3" nozzle bottom right. 8 5/8" diameter x 82 1/8" overall length. 8 x 4 concentric reducer on one end and 8 x 4 eccentric reducer on other end..
(48) 1" OD welded tubes. (2) Glass lined heads. Tube Diameter: 1 in.
design pressure tube side: 10.3 barg + full vacuum @ -40/204 degrees C (100 psig + full vacuum @ -40/400 degrees F), shell 10.3 barg + full vacuum @ -40/204 degrees C (100 psig + full vacuum @ -40/400 degrees F), 316L stainless steel baffles, design code: ASME VIII, DIV 1, Shell-side Passes: 1. Tube-side Passes: 1. Tube Type: Straight Tube. Tube Diameter: 0.75 in. Tube Thickness: 0.015 in. Nozzle Schedule: tube side: 2-80mm, shell side: 1-150mm, 2-50mm, .
Design pressure tube side: 10.3 barg + full vacuum @ -40/204 degrees C (100 psig + full vacuum @ -40/400 degrees F), shell 10.3 barg + full vacuum @ -40/204 degrees C (100 psig + full vacuum @ -40/400 degrees F), 316L stainless steel baffles, design code: ASME VIII, DIV 1, Tube-side Passes: 1. Tube Type: Straight Tube. Tube Diameter: 0.75 in. Tube Thickness: 0.015 in. Nozzle Schedule: tube side: 2-80mm, shell side: 1-150mm, 2-50mm, .
Graphite with CS shell Impervite modular cross bore inserts with 99 service holes and 118 process holes per module
Shell-side Passes: 1. Tube-side Passes: 1. Tube Type: Straight Tube. Tube Number: 130. Tube Diameter: 0.75 in. Tube Length: 72 in. Tube Thickness: 0.07 in. Nozzle Schedule: Two 6", two 3".
Length: 19.3 in. Shell-side Passes: 1. Tube-side Passes: 1. Tube Type: Straight Tube. Tube Number: 14. Tube Diameter: 0.75 in. Tube Length: 1.5 in. Tube Thickness: 0.07 in. Nozzle Schedule: shell side nozzles are 1.5", tube side nozzles are 1.5" and 2" with a 1" drain..
Shell-side Passes: 1. Tube-side Passes: 1. Tube Type: U-Tube. Tube Number: 12. Tube Diameter: 0.75 in. Tube Length: 67 in. Tube Thickness: 0.07 in. Nozzle Schedule: Shell nozzles are 1" and 3/4", Two tube nozzles are 1.5".
Used heat exchangers are essential in virtually every industrial setting where fluids need to be heated or cooled efficiently. These systems transfer thermal energy between liquids, gases, or steam without mixing the media—making them critical in process optimization, energy recovery and environmental control. With over 47 years of experience, IPP supplies used, secondhand and surplus heat exchangers from 20 global plant sites and maintains a massive inventory of 15,000+ systems ready for fast shipment.
IPP offers a wide variety of heat exchanger types including shell and tube, plate, air-cooled, spiral, and double-pipe designs from trusted brands like Alfa Laval, API Schmidt-Bretten, Tranter, Graham and ITT Standard.
Heat exchangers are unfired heat transfer equipment used in process plants. Heat exchangers are used for the transfer of heat or cold between two fluids for the purpose of heating the process, cooling the process, or condensing vapors during the process. Heat exchangers are measured in Square Feet. There are several different types of heat exchangers. These include:
Heat exchangers must withstand temperature, pressure and chemical exposure:
Learn more about industrial heat exchanger design and selection from Chemical Processing.
Search the IPP inventory or contact IPP’s thermal systems experts to find the right used, surplus or secondhand heat exchanger for your facility. From simple replacements to full energy recovery systems, IPP helps you optimize performance while cutting lead times and costs.
Have questions about Heat Exchangers or our services? Learn more about our products and why customers choose IPP.
