Quote
Quote Cart
clear all items
Equipment Search

New and Used Equipment

Search our inventory of over 15,000 new and used industrial equipment. Filter by manufacturer, material of construction, industry uses, and technical specs.

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Manufacturer: Artisan
Clear all filters
Refine Results

Narrow these listings

Results 7 items found

Available equipment

Showing 7 of 7 matching equipment.

Stock Number: #94604
Stainless Steel 316 Artisan Pressure Leaf Filter
Filtration Area: 65 ft²
Pressure: 400 psi
Temperature: 200 °F
Additional Information: continuous filter/washer Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each stage 12-stages, 24-rotating discs thru Dodge reducer 5.5:1 ratio W/control panel
More Details ⟶
Stock Number: #49898
181.4 kg/h (400 lb/h) Stainless Steel 316 Wiped/Thin Film Evaporator
Evaporation Rate: 400 lb/h
Total Heat Transfer Surface Area: 80 ft²
Orientation: Horizontal
Diameter: 42 in
Height: 84 in
Pressure: 25 psi
Temperature: 750 °F
Mechanical Seal on Shaft: Yes
Additional Information: Kontro wiped film evaporator shell rated 25 psi @ 750 deg F. Jacket rated 65 psi @ 750 degree F. Has removable 18" diameter rotor. Mechanical seal. Has 1/2 CS jacket with expansion joint. Has outboard bearings. Has 12" diameter inlet, 8" diameter outlet. Belt driven by 40 HP, 3/60/208/220/440 volt, 885 rpm motor, UL label.
More Details ⟶
Stock Number: #94605
Stainless Steel 316 Pressure Leaf Filter
Filtration Area: 65 ft²
Pressure: 400 psi
Temperature: 200 °F
Additional Information: Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each stage 12-stages, 24-rotating discs thru Dodge reducer, 5.5:1 ratio. W/control panel
More Details ⟶
Stock Number: #94603
Stainless Steel 316 Artisan Pressure Leaf Filter
Filtration Area: 65 ft²
Pressure: 400 psi
Temperature: 200 °F
Additional Information: Filtration resistance due to cake build-up on stationary filter plates is limited to specific controlled thickness by the wiping action of the blades attached to rotating discs in each stage 12-stages, 24-rotating discs thru Dodge reducer, 5.5:1 ratio. W/control panel.
More Details ⟶
Stock Number: #91223
Stainless Steel 316 Artisan Wiped/Thin Film Evaporator
Evaporation Rate: 15 lb/h
Total Heat Transfer Surface Area: 3 ft²
Pressure: 15 psi
Temperature: 450 °F
Vacuum: Yes
Additional Information: hot oil jacket rated 30 psi/full vacuum @ 450 deg F. Driven by 7.5 HP, 3/60/230/460 volt, 1750 rpm motor. With 3 HP, 3/60/230/460 volt, 1750 rpm rotary gear pump.
More Details ⟶
Stock Number: #38727
45.4 kg/h (100 lb/h) Stainless Steel 316 Wiped/Thin Film Evaporator
Evaporation Rate: 100 lb/h
Total Heat Transfer Surface Area: 20 ft²
Orientation: Horizontal
Diameter: 24 in
Height: 66 in
Pressure: 15 psi
Temperature: 400 °F
Vacuum: Yes
Additional Information: Consists of 20 sq ft Artisan horiz 316SS thin film evaporator. jkt rated 150 psi @ 400 deg F. 316SS rotor. Shell 2' dia x 5'6" long; btm head 2' dia x 2' long. Segmented. Mech seal. Belt driven by 7.5 HP, 1170 rpm, 3/60/230/460 volt motor. w/belt guard.
More Details ⟶
Stock Number: #103350
Stainless Steel 304 Artisan 3 Pressure Leaf Filter
Filtration Area: 3 ft²
Diameter: 6 in
Pressure: 400 psi
Temperature: 200 °F
Additional Information: Continuous filter/washer Number of stationary filter plates: 11 Number of solid rotor discs with cake trimming vanes: 12 Drive: 3 HP adjustable speed drive Seal: Mechanical seal Sensor: Torque sensor Cake outlet size: 3/4" Filtrate outlet size: 2" Feed inlet size: 1/2" Mounting: On stand Control panel: Included 500 psi Pulsa diaphragm metering pump, Mdl 7120-S-E, driven by 1/2 HP motor.
More Details ⟶
Request a Quote