6,300 liter order number 60669 Pressure ratings: Internal -1/6 Bar @ -25/+200°C total volume 8,190 liters; Jacket rated -1/6 Bar @ -25/+200°C total volume 795 liters. Lined with glass WWG9115 With a top mounted drive with Burgmann mechanical seal type M462L-D20 and Burgmann Thermosyphon TS 2000 pneumatic bottom outlet valve, and solids dosing device,

UNUSED

Internal finish 240 grit buff polished-Bright polished, external buff polish to a matte finish. ASME NB rated, and "U" stamped.

welded dish heads (2:1) 12 mm thick

Coil: 114 mm OD x 4 mm thick,

Limpet covers bottom dish and 2615 mm of straight side (pitch 150mm). Coil heating surface area.

With Insulation rings and upper drip ring. Two top lifting lugs and one tailing lug.

20" Manhole with Cover and davit arm assist, one 6" sight glass, Support Type: Lugs.

• New Base Reactor Body (with covers) Bare reactor price in sales comments.
• Can be upgraded w/ drive system to reactor
• Both ASME National Board # and CE Marked
• Interchangeable with UGE Agitation Systems & Pfaudler Agitation Systems

• This is a bare reactor

• Rated for lethal service.
• Nozzles with Inconel 625 inlay.
• Glasslined beavertail baffle with WIKA TR-10 & PT100 temperature probes.
• Mechanically sealed agitator: FlowServe MD-200 DN140.
• See sales comments for additional options.

• Can be equipped with Agitation System
• Reglassed KC series reactor body
• Manufacturers number 4364421
• With (4) side support lugs or (8) leg couplings for mounting/installation.

jacketed high pressure reactor Jacket volume: 1700 liter Total length: 8000 mm Jacket wall thickness: 30 mm

• Sheathing covering Insulation rock wool and puff , 304 SS sheathing completely sealed to 0.4 bar
• With thermowell and dip pipe.
• Internal : Buff polished to 240 Grit.
• External: Buff polished to 180 Grit.
• UNDER FABRICATION, WILL BE FACTORY COMPLETE WEEK OF DEC 15 2025! Support Type: Lugs.

Auft # 37387 belt driven by LOHER 3.6 KW, 1715 RPM, 3/7.7-13.3A/60Hz/220-380 volt motor, ex proof (T3). Designed to German TUV standards. Reglassed in Romani by UGE 2001.

MFR # 12269 Model SA-3000 Special three top lifting lugs, six leg couplings, four side wall lugs Shell=1 & 1/64", heads=1 & 1/64", jacket =5/8" PTE size 10 drive with an EX proof 20 HP motor and a dry seal. 36" main cover. 18" man way with pro ring and sight glass assembly with man way assist.

Shell rated 150/FV @ 450 degrees F. Conventional jacket 150/FV @ 450 degrees F with welded 2:1 elliptical heads Alloy mixer with dual tier agitation, lower is a CBT, upper is a PBT

• Two vessels, both the same serial # J57022 A & B NB # s 10936 & 10935.
• Mirror Polished, sanitary, portable.
• On board controls for mixer. Vortex breaker.
• SS washdown motor. CIP: Yes. Support Type: Legs.

• Mirror polished Bio Reactor with conventional jacket
• TUV stamped
• Vertical top mount agitator with double stack up mechanical seal with 2 seal pots Driven agitator is a high polish helical screw ,drive motor is a Lonne, 50 Hz, 0.6 kW, 1350 rpm, 220/240vac. Motor CE certified. Jacket volume is 10 liter With six bottom side nozzles for electrodes Equipped with Spray ball(s) for Clean in Place (CIP)
• Re polished in 2009 CIP: Yes. Support Type: Legs.

• Jacket thickness 0.188
• Polished, sanitary, sanitary jacket shroud.
• Second vessel is NB # 1919, serial 957148 Built 1995.
• On Board controls with VFD for agitator motor. CIP: Yes. Support Type: Legs.

with the jacket chamber insulated and sheathed with 14Ga 316SS Manufacturer's number: 2516 Glass 3009 Manuf #: 2516. Head NB# 1755 Head rated for 150psi/FV @ 500 degree F Glass 3009 3 blade pitched turbine agitator Motor: driven by 2 hp,230/460 volt XP

Head rating: Head 12 psi/FV @ 450 degree psi certified by: Ceramic coating Co. Man Serial# 844219 Model# 09185KB28 Right angle driver Manufactured by Textron 2500 rpm (6:1) ratio Top material: Glass L2001 (R104) 6” handway Glass L2001 (R104)

high pressure reactor Agitator: top mounted Pro-Quip agitator drive with a flange mounted approx 3 HP motor and mechanical seal on shaft

• Full Mirror Polish and sanitary.
• With CIP. CIP: Yes. Support Type: Legs.

• Appears plug free, fire polish OK slightly dulled, Glass 9115
• Sanitary shroud over clamp top.
• Motor speed controlled by Potentiometer.
• Has One "R" tag and a replacement Nameplate.

straight side and coned bottom , internal pressure -1/6 bar @ -30/150 degrees C (13500 liter), jacket -1/10 bar @ -30/150 degrees C (270 liter), TUV certified Powder transfer unit: Capacity: 19 liters Material: 316Ti (1.4571) stainless steel Manufacturer: Enco Serial number: T5350 Internal pressure: -1/6 bar @ -30/200 degrees C (19 liters) Dimensions: 206mm diameter x 600mm straight side Bolt dished top Bolts directly onto a tank/reactor flange.

With baffle.

Top mounted 2.5 TW drive belt driven by a 2 HP 3/60/230/460 volt motor.

glass lined reactor assembly Equipped with 2.5 TW drive with belt driven motor.

• MOC is Duplex 2205
• Design pressure internal 15 barg + full vacuum @ 170 degrees C, jacket 7.4 barg + full vacuum @ 180 degrees C.
• Agitation system driven by 7.5kW, 3/50/380-415/660-720 volt 975 rpm Ex motor.
• Internal baffle plates on sidewall, 316L stainless steel limpet coil jacket on straight side and bottom dish.
• Design code PD5500:2003:CAT 2.