Industry-Specific Categories from IPP. Over 207 pieces for sale. Chemical Equipment and Process Equipment buy unused, surplus, second hand or used here.

Polymer filter continous rotary filtration system1220 SqCm active screen area9500 Cm/Hr capacity, 48000 watt oil/vapor heating capacity, with 2 heater zones. CS construction.RexRoth 11 KW power pack 3/50/500 volt 1460 Rpm. 2900 Kg Filter

diverter valve and screen changer masch #20004017,2- 110 cm2 screens screen dimensions 120mm x 0.5mm x 93mm (+0.5),230-600 kg/hr throughput, heating capacity of the 6-cartirdges is 6 x 1000 watt, Gebhard/HLP type cartridges, hydraulically driven by a Heusinger and Salmon powerpack, powerpack driven by a 11/12.7 kw,3/50/60/380/660/420/720/380/660/480/830 volt,1440/1465/1730/1755 rpm 2-speed motor, local control panel on a davit,

plastic 'Utiliser' dry granulator
model 20-strand
321 stainless steel rotor with cutting blades
motor : 50/60 Hz, 400/380/415 volt, 981/982/1184 rpm , IE2 CE motor
aluminium chamber with hinged top inspection cover

type 20-48T
Plastic 'Utiliser' dry granulator
Model 20-strand
321 stainless steel rotor with cutting blade
Aluminium chamber with hinged top inspection cover
driven by 15 kw, 3 phase, 50/60 Hz, 400/380/415/460/660/690 volt, 970/975/1180 rpm

plastic 'Utiliser' dry granulator
model 20-strand
321 stainless steel rotor with cutting blades
motor : 50/60 Hz, 380/400/415/460/660/690 volt, 970/975/1180 rpm
aluminium chamber with hinged top inspection cover

centrifugal dryer, for plastic pellets/granules
rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h

stainless steel fluid bed crystallizer
used on PET pellets with heated nitrogen
total pressure drop, ca.30 mbar, differential pressure ca 2 mbar, design pressure pe=90 mbar
product thickness ca.200mm
approximate bed with glass inspection hatches
1.6m wide x 3.3m long x 500mm deep with glass inspection hatches
Openings include: product inlet 100mm diameter with rotary valve, hot air inlet 700mm diameter, hot air outlet 700mm diameter, product outlet 150mm x 185mm, chamber with hood,

Unused Hydraulic unit for a 3V Cogiem filter dryer.3.7kw, 200 bar max pressure. 150 liter tank. Complete except Motor.

30" Industrial dishwasher, 304 SS, with dual baskets
Washing chamber is 30" x 30" x 36". Pump driven by a 2 HP motor.
Inlet is 3/4", discharge is 1.5"

• Floor Console Incubator/Orbital Shaker.
• Takes a 6 liter or a 4 liter flask
• 25 up to 525 RPM
• 41 degrees F., to 140 degrees F.

Vibrating fluid bed with enclosed chamber rated pe=60 mbar
total pressure drop, ca.30 mbar
differential pressure ca 2 mbar
design pressure pe=90 mbar @ 200 deg C, 400 deg C
product thickness ca.200mm
Openings include: product inlet 100mm diameter with rotary valve, hot air inlet 700mm diameter, hot air outlet 700mm diameter, product outlet 150mm x 185mm, chamber with hood

• Portable energy/hot water heating controller
• 50 Hz
• 400 V
• 1 A
• 90°C temperature limit
• Mounted in a carbon steel cabinet with wheels
• Explosion-proof control box with on/off switch

Waters 2695 alliance HPLC with 2487 detector. The 2487 dual wavelength absorption detector features the following: Advanced programmability, Unmatched signal to noise ratio, reduced optical band with and exceptional linearity. The Waters 2695 separations module is used for In-vitro diagnostic testing to analyze many different compounds. This is an integrated solvent and sample management platform.

Waters 2695 alliance HPLC with 2487 detector. The 2487 dual wavelength absorption detector features the following: Advanced programmability, Unmatched signal to noise ratio, reduced optical band with and exceptional linearity. The Waters 2695 separations module is used for In-vitro diagnostic testing to analyze many different compounds. This is an integrated solvent and sample management platform.

The Husky INQ400 PET is a high-output, multi-material injection molding system specifically engineered for producing PET bottle preforms from virgin PET homopolymer, regrind, or barrier-layer materials. The system integrates a 64-cavity rotary turret mold with a robust clamp mechanism, high-capacity plasticizing/injection section, and an operator-friendly control platform.

System Overview

1. Clamp Unit (Mold Station & Turret Assembly)

• Supports the rotary 64-cavity turret mold used for PET preform manufacture.

• Incorporates:

  • Stationary platen
  • Rotary turret assembly directing mold opening/closing and indexing

• Provides precise mold alignment and repeatable movement across each molding cycle.

2. Injection Unit (Plasticizing & Injection Section)

• Designed for PET homopolymer and capable of processing regrind and barrier materials.
• Utilizes a high-efficiency screw for plasticizing resin pellets, delivering consistent melt quality.
• A dedicated injection piston charges melt into the mold during the injection phase.
• A distributor valve automatically directs resin flow depending on the operating stage (plasticizing vs injection), supporting multi-material operation.

3. Control Unit (HMI & System Controls)

• Integrated control system uses an PC-based platform.

• Standard interface includes:

  • 10.4” color flat-panel display
  • Alphanumeric keypad
  • Mouse input
  • Hinge-mount HMI enclosure

• Provides adjustments for process parameters, diagnostics, alarms, recipes, and machine sequencing.

Key Specifications

• Screw feed rate: 60 rpm
• Installed pump horsepower: 200 hp
• Machine heaters: 92 kW
• Mold heaters: 82 kW
• Mold type: 64-cavity rotary turret (PET preform)
• Material capability: PET homopolymer, regrind, barrier materials
• Included option: Dehumidification hood

Waters 2695 alliance HPLC with 2487 detector. The 2487 dual wavelength absorption detector features the following: Advanced programmability, Unmatched signal to noise ratio, reduced optical band with and exceptional linearity. The Waters 2695 separations module is used for In-vitro diagnostic testing to analyze many different compounds. This is an integrated solvent and sample management platform.

Waters 2695 alliance HPLC with 2487 detector. The 2487 dual wavelength absorption detector features the following: Advanced programmability, Unmatched signal to noise ratio, reduced optical band with and exceptional linearity. The Waters 2695 separations module is used for In-vitro diagnostic testing to analyze many different compounds. This is an integrated solvent and sample management platform.

lab pelletizer
7" wide opening

• Capacity: 264.5 lb (120 kg)

• Scale: Trayvou dial face scale

• Model: 101

• Serial Number: 021278

• Platform: 600 mm x 600 mm CS platform

• Graduations: 200 g

• Dial Face: 550 mm diameter, kilogram markings

• Features:

  • Locking mechanism for transportation
  • Built-in leveling indicator (bubble)
  • Base-mounted

1/50/240 volt. Heat seals plastic banding,
fitted with reel for 1/2" wide banding.
Table size 2' x 3' x 2'6" high. Mobile on wheels.

• Polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE- ATKA system # 6098
• Pump by LEWA Temperature Rating: 104 °F.

• Polished to a 180 Grit finish
• Modular Chromatography System
• Pump by Lewa Temperature Rating: 104 °F.

• 400 Liter/Hr.(1.7 GPM), 316 SS, polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE
• Skid mounted on wheels for mobility. Pressure Rating: 72.5 psi. Temperature Rating: 104 °F.

• 316 SS polished to a 180 grit finish.
• Pump by Lewa Pressure Rating: 87 psi. Temperature Rating: 104 °F.