Pumps, Vacuum, Air & Fluid Handling - Used and Surplus Inventory | IPP

pressure compressor cooling medium R717 Motor current: 144A

• Variable speed motor based on load.

C 3-stage reciprocating Boil-off-gas (BOG) compressor system maximum allowed rod. Load 100kN, rated discharge pressure of final stage 69 barg, suction pressure 1st stage 0.05 bar @ 30 degrees C, 2nd stage 4.6 bar @ 45 degrees C, 3rd stage 27.7 bar @ 45 degrees C, discharge pressure 1st stage 4.7 bar @ 176 degrees C, 2nd stage 27.9 bar @ 190 degrees C, 3rd stage 69 bar @ 160 degrees C, driven by a 250kw, 3/50/400 volt, 594 rpm ATEX 1022 EExd II B T4Loher motor, (1) 550 liter stainless steel vertical pulsation dampner vessel, manufactured by Nadoba Stabilini, serial #954, pressure 0.05 bar @ -118/+30 degrees C, 610mm diameter x 1740mm straight side, weld dished top and bottom, (1) 125 liter carbon steel horizontal pulsation dampner, manufactured by Tlakova Nadoba Stabilini, serial #955, pressure 10.7/69.6 bar @ 57/159 degrees C, weld dished ends, (1) carbon steel tube and shell horizontal 1st stage intercooler, manufactured by APL Apparatebau AG, serial #W8227/EC22601, tubeside pressure 10 barg @ -10/200 degrees C (27 liter), shell 10 barg @ -10/200 degrees C (53 liter), (1) carbon steel tube and shell horizontal 2nd stage intercooler, manufactured by APL Apparatebau AG, serial #W8228/EC22602, tubeside pressure 29 barg @ -10/200 degrees C (20 liter), shell 10 barg @ -10/200 degrees C (55 liter), (1) carbon steel tube and shell horizontal 3rd stage intercooler, manufactured by APL Apparatebau AG, serial #W8229/EC22603, tubeside pressure 78 barg @ -10/200 degrees C (9 liter), shell 10 barg @ -10/200 degrees C (42 liter), system also includes interconnecting pipework, valves, etc, ALL CE MARKED

Nash SC2SS Vacuum pump, with vapor recovery system Test # 90Y002 The system includes the following equipment; a vacuum pump, two heat exchangers, a separating tank, and seal pots. The direct drive vacuum pump, is manufactured by Nash, size SC2SS, Pos. 4 ,Vac, rated 200 cfm @ 5-20" Hg. The vapor exchanger is a 30 sq. ft., all 316 SS, horizontal heat exchanger manufactured by Industrial Process Equipment corp., Model # 2ST8-60, Serial # 105-641A National Board # 988 It’s shell and tubes are rated for 150/FV The condensate chiller is a 10 sq.ft., 316SS tube bundle, 316SS heads, with CS shell, horizontal heat exchanger and is also manufactured by Industrial Process Equipment Corporation. Serial # 1056413, and National Board # 989, Rated for 150/FV psi in the shell and tubes. The dual seal pot arrangement, with Nitrogen purge is provided by Duramettalic, Canada/Condex Heat Transfer Corp. Serial # 91-3-4146 & 4179, and rated for 400 psi at 400 degrees F. Both have level sight glasses and N2 purge line with regulator and Liquid make up valves. The units 316 SS separator, is manufactured by Jenco, Serial # 91-1327, National Board # 525, and rated for 30/FV at 350 psi. The separator tank also has a liquid level sight glass. The vapor inlet line is 4" flanged, and separator outlet is 1”. Automatic valves for liquid flow control are provided by Fisher and El-O-Matic, and the vapor contact piping is 316 SS. System includes all DP cells, RTD temperature probes, and pressure gauges. Designed to be used in a hazardous atmosphere, skid has a 60 amp Square D breaker, and explosion proof switches and controls.

This Aquadyne 3300DST is a robust, mobile, Detroit Diesel-powered reciprocating pump built to deliver very high pressure (up to 10,000 psi) at 45 GPM. Its design makes it well-suited for clean-in-place (CIP) operations—such as high-pressure tank washing—where reliability and performance are critical. This system includes a tank pressure washing module for installation on manways to perform CIP operations.

SIHI vacuum skid consisting of (1) 140m3/hour carbon steel liquid ring vacuum pump 3 bar (1) 4 liter carbon steel separator vessel, pressure -1/3 barg @ 120 degrees C 273mm diameter x 1020mm total height, (1) 9.9 square meter carbon steel condenser, pressure tube side 6 barg @ 250 degrees C, shell -1/3 barg @ 250 degrees C,

Multistage To include starter and soft start if applicable,

• vacuum pump skid with booster pump,
• water cooled,
• 1072/1295 m3/hr booster pump manufactured by Rietschle, type VWP 1000 (02) 101956-0200, 43mbar max pressure, 4kW, 3000 rpm,
• (1) radiator,
• (1) 63liter stainless steel pre-separator tank,
• (1) 15 liter stainless steel condensate collection tank,

CS/SS centrifugal blower system Houston-Texas with Rotary Lobe GAS pump, mfd by Roots, serial # 50289 RP71, Type Wispair. Inlet temp 135 deg F, inlet air 1758 icfm, inlet pressure 14.70 psia, discharge pressure 23.90 psia @ 516 rpm Inlet nozzle 12", outlet nozzle 10". Arrangement: horiz case CS, impellor 304SS. W/Carbone ring air seal. 1. silencer: model SDS-10, part # 58-310-AZ, serial # 11018-92-2 2. silencer: model RISY-10, part # 54-210-FH, serial # 11018-92-2 Motor data: 460V/191A/60HZ/1191 rpm, mfd by W/Marathon, model 150 HP # XD 449TTFS6589 AN V-belt driven. System includes cooling air tower, model AA-2000-10, serial # 392-B2827-1, mfd by Xchanger Inc. Hopkins-Minnesota.

• Ft./hd. (feet of head)

diesel centrifugal firewater pump system system consists of:(1) skid mounted 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" CMBB, serial #690603/1, 2000 rpm, packed gland on shaft, driven by a Leyland diesel engine, unit # CPU-3836, type PU401/21/3, engine # 911288, type UE401/113/3, tappet clearance 020" cold, injection 26 deg before top dead center, firing order 153624, exhaust with a silencer,(1) electric driven back up pump, 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" E-NE-B, serial # 690602/1, 3000 rpm, packed gland on shaft, direct driven by 60 hp, 3/50/380/420 volt, 2940 rpm motor,(1) Jockey pump with gauges and valves(1) control panel

3-step Membrane dosing/metering pump with vent screw on each pump head 1.4571 pulsation absorber 0,5 l, G 3/8’’, Element A: 1100 l/h @ max 10.5 bar Element B and C: 550 l/h @ 4.2 bar

115 to 125 max. psi Rotary Screw Air Compressor Oil Free, packaged design, with microprocessor controls, cooler and lubricator

Positive Displacement Rotary Lobe blower Series RBS, size 65/F includes Inlet and Exhaust filters. With patented special three lobe profile rotors with LOW-pulse system to reduce the pressure pulsations. Flow rate up to 1072 m3/h , solute inlet pressure starting from 450 mbar, maximum outlet temperature 150°C Material: rotor, shaft and housing (steel casting) Material: tooth wheels (18NiCrMo 5)

• Volume: 1.500 cm³/rpm
• Tooth wheel pump without motor and gear box,
• order # 40/4357, against pressure max. 300 bar.

330mm x 185mm motorised rotary valve leaking air 3767 dm³/min no motor

3/50/400/690 volt,

1.5 m3/hour at 150 bar 24-64 lift/minute,

2000 to 5000 cubic meter per hour triple head diaphragm pump working pressure 80 bar, max permissible working pressure 100 bar @ -196 degrees C driven by a 2-speed motor 52kw, 3/60/440/480 volt, 1770 rpm motor via a Lenze type 12.602.32.15 (5) 321 stainless steel valves,

motorized rotary valve pressure rated 3.5 bar @ 60 deg C chain driven by 1.5 kw, 3/50/500 volt, 1420 rpm motor with vari-speed gearbox inlet with s/steel feed hopper 650mm diameter top x 400mm straight side by 300mm diameter bottom mounted on carbon steel frame

Wet Gas Compressor Radial Split case two stage compressor motor through a Lufin gear reducer

The Datum compressor is an 18 frame size(inside case diameter) with a radial split case, six impellers and a back to back rotor design. The machine features a lube skid that supports the compressor, motor and gear, a gas skid for the double Dry Gas seals, and instrumentation for vibration and temperature detection.

MMSCFD Dry: 49.73; Lbs/Hr Wet: 224,820; Inlet PSIA: 20.9; Inlet Temp: 106 Degree F; Inlet ACFM Wet: 24,183 Designed for Outdoor Use, Under roof.
All Electricals are Class 1, Group CD, Division 2. Speeds: Maximum Continuous 5,653 RPM, Trip Speed 5,719, CCW rotation from drive end. With one piece shaft. Motor, Gear reducer, and Compressor skid mounted.
Lufkin Gear reducer, 3.178:1 ratio, rated 10,300 HP. The Oil control system is by Cobey, and skid mounted. The Seal gas system and skid are by Flowserve.

order#27.125.0 3 bar @ 110 deg C

Casing rated for 25 psi maximum working pressure.
Standard nozzle orientation motor : 219 amps

IP55 motor, water cooled, with integrated air dryer, mounted in an acoustic cabinet,

System with Knock out pot and heat exchanger. 25 Gallon 304 SS, receiver by J D. Cousins, rated for FV 75 psi at 350 degrees F. 30 Gallon condensate receiver, by TMT, Carbon steel, vertical, 12.75" x 38". 69 Sq.Ft. Hastelloy tube, tube sheet and head, CS shell, vertical heat exchanger shell rated for 100 psi at 300 degrees F, tubes rated for FV/100 psi at 300 degrees F.