Quote
Quote Cart
clear all items
All Equipment Continuous Mixers

Continuous Mixers - Used and Surplus Inventory | IPP

Used continuous mixers for sale: nonstop blending solutions for powders, slurries and pastes

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Mixer-Continuous
Clear all filters
Featured

Top Continuous Mixers in stock

Highest-ranked available inventory for this selection.

Browse

Viewing Mixer-Continuous

No subtypes are available.

Mixer Types
Mixer-Banbury Mixer-Charge Can and Pony Mixer-Continuous Mixer-Disperser Mixer-Double Arm Mixer-Intensive Mixer-Muller Mixer-Munson and Rotating Mixer-Nauta Mixer-Ribbon & Paddle Mixer-Shot and Sand Mixer-Static Mixer-Twin Shell & Double Cone
Refine Results

Narrow these listings

Specifications
Results 20 items found

Available Continuous Mixers

Showing 20 of 20 matching Continuous Mixers.

Featured
Stock Number: #217875
Mixer Continuous horizontal conical continuous mixer with integrated nozzles
Motor Power: 15 kW
Flow Rate: 33,050 lb/h
Orientation: Inclined
Additional Information: 15 ton/hr stainless steel horizontal conical continuous mixer with integrated nozzles for adding up to 3 components into the powder, for mixing and agglomerations pocket wheel / chain (2) trunnions, additional small mixing screw on the powder outlet to add another powder for finishing
More Details ⟶
Featured
Stock Number: #212563
Mixer Continuous Wahlco XN4612 B Stainless Steel 321
Motor Power: 60 HP
Diameter: 45 in
Length: 46 in
Orientation: Horizontal
Screw: Yes
Additional Information: twin shaft wad mill (pug mill) with a removable 304SS cover 1/8" thick lining Twin chrome plated mixing shafts, 5" diameter with chrome plated blades, with a CS compacting tapered screw discharge on the end of each shaft . Tapered screw sections are 14" diameter x 36" long, feeding a single 9 3/4" wide x 6" high 304SS lined discharge chute. With an air operated automatic wire cutter on discharge end of machine to cut extruded clay. Screw shafts driven through a 25.38 ratio shaft mounted reducer Motor rated for 230/460 Volts
More Details ⟶
Featured
Stock Number: #208251
Mixer-Continuous
Motor Power: 1 kW
Diameter: 1,600 mm
Length: 2,200 mm
Orientation: Vertical
Screw: Yes
Number of Screws: 1
Additional Information: weld flat top weld coned bottom approx 200mm diameter central screw,148-1400 rpm150mm bottom outlet
More Details ⟶
Featured
Stock Number: #23132
Stainless Steel 304 Strong Scott TS-14 Mixer-Continuous
Motor Power: 50 HP
Diameter: 14 in
Length: 42 in
Orientation: Horizontal
Seal Type: Packing
Additional Information: turbolizer Size 661-K min 382 rpm 14" dia x 42" long chamber Drop door style. Packing gland on shaft.
More Details ⟶
Stock Number: #217877
39 kW (52.3 HP) Stainless Steel Other Mixer-Continuous
Motor Power: 39 kW
Orientation: Vertical
Additional Information: stainless steel/rubber vertical continuous mixer and agglomerator 3~/330-440V/2946rpm.
More Details ⟶
Stock Number: #207108
Stainless Steel 904 List (Switzerland) AP12-82 Conti Mixer-Continuous
Motor Power: 13.4 HP
Capacity (Design): 8.1 gallons
Length: 37.2 in
Orientation: Horizontal
Pressure: 0.5 bar
Temperature: 662 °F
Jacket Pressure: 6 bar
Jacket Temperature: 350 °C
Jacket Material: Stainless Steel 304L
Additional Information: 25 Liter Double Shaft Kneader Mixer with 1.4306 s/steel Double wall jacket internal -1/+0,5 bar hydraulic drive
More Details ⟶
Stock Number: #217876
15 kW (20.1 HP) Stainless Steel Other Mixer-Continuous
Motor Power: 15 kW
Flow Rate: 33,050 lb/h
Orientation: Inclined
Additional Information: 15 ton/hr stainless steel horizontal conical continious mixer with integrated nozzles for adding up to 3 components into the powder, for mixing and agglomeration spocket wheel / chain driven (2) trunions, additional small mixing screw on the powder outlet to add another powder for finishing
More Details ⟶
Stock Number: #220801
111.9 kW (150 HP) Stainless Steel 304 Mixer-Continuous
Motor Power: 150 HP
Diameter: 12 in
Length: 87 in
Orientation: Horizontal
Additional Information: Twin barrel mixer/processor Two 8" barrels input rpm 778, output rpm, 105
More Details ⟶
Stock Number: #217881
37.6 kW (50.4 HP) Stainless Steel Other Mixer-Continuous
Motor Power: 37.6 kW
Orientation: Vertical
Additional Information: direct driven by BBC Brown Boveri Motor: 335-440 V included a motorized fan
More Details ⟶
Stock Number: #92820
Stainless Steel 304 Mixer-Continuous
Motor Power: 75 HP
Diameter: 8 in
Length: 120 in
Orientation: Horizontal
Pressure: 100 psi
Temperature: 650 °F
Jacketed: Yes
Additional Information: ko-kneader. 8" dia x 10' long kneading chamber. Cored shaft.
More Details ⟶
Stock Number: #92819
55.9 kW (75 HP) Stainless Steel 304 Mixer-Continuous
Motor Power: 75 HP
Diameter: 8 in
Length: 120 in
Pressure: 100 psi
Temperature: 650 °F
Jacketed: Yes
Additional Information: ko-kneader kneading chamber. Cored shaft, jkt chamber
More Details ⟶
Stock Number: #94654
Baker Perkins Ko-Neader Mixer-Continuous
Motor Power: 75 HP
Diameter: 8 in
Length: 120 in
Orientation: Horizontal
Pressure: 100 psi
Temperature: 650 °F
Jacketed: Yes
Additional Information: Cored shaft, jacket chamber. No motor available.
More Details ⟶
Stock Number: #704681
7.5 kW (10.1 HP) Stainless Steel 316 Mixer-Continuous
Motor Power: 10.1 HP
Diameter: 150 mm
Length: 900 mm
Orientation: Horizontal
Jacket Material: Stainless Steel 316
Screw: Yes
Number of Screws: 2
Additional Information: Type: Twin screw jacketed mixer 316 stainless steel shafts with scraper type removable blades. motor with cooling fan Unit with removable top, bottom and ends. Spare blades. Openings: feed 1-95mm; discharge 140mm x 75mm; 34-25mm on jacket.
More Details ⟶
Stock Number: #23134
37.3 kW (50 HP) Stainless Steel 304 Mixer-Continuous
Motor Power: 50 HP
Diameter: 14 in
Length: 42 in
Orientation: Horizontal
Seal Type: Packing
Additional Information: turbolizer. Unit driven by Reeves varidrive 50 HP, max 1222 rpm, min 132 rpm. 14" dia x 42" low chamber. Drop door style. Packing gland on shaft.
More Details ⟶
Stock Number: #99779
65 kW (87.2 HP) Mixer-Continuous
Motor Power: 65 kW
Diameter: 101.6 mm
Length: 40 in
Orientation: Horizontal
Pressure: 20 bar
Temperature: 200 °C
Screw: Yes
Number of Screws: 1
Additional Information: ****Buss kneader Oil pressure 6 bar @ 250 deg C water pressure 20 bar @ 200 deg C SS screw cored for steam heating, screw 140mm dia screw casing w/hinge (2) heating zones, (1) cooling zones. Screw driven by Miller Type KLA841-4, 14.8-65 KW, 500-2200 rpm, 3/50/380 volt varispeed motor via Type H6/R150, 14:1 ratio, Unit w/SS screw conveyor Chain driven by 3 HP varispeed motor. Mixer openings: feed 1-5 1/2"; discharge 1-5 1/2"; jkt connections 7-1/2", 4-1/4".
More Details ⟶
Stock Number: #20615
Stainless Steel 304 Mixer-Continuous
Diameter: 32 in
Length: 234 in
Orientation: Horizontal
Plow Type: Paddles
Additional Information: continuous Solidaire non-jkt paddle mixer. Agitator is lined w/small flat adjustable pitched paddles. Outboard bearings on shaft. Openings: top 2-13 1/2", hd 1-4". No drive w/unit.
More Details ⟶
Stock Number: #201456
Stainless Steel 304 Mixer-Continuous
Diameter: 22 in
Length: 144 in
Orientation: Inclined
Seal Type: Mechanical
Additional Information: Zig Zag blender, continous spray nozzle blender. Rated 60 LBS/CuFt. 19.81 rpm drum rotating speed. With feed and discharge hoods designed for nitrogen purge.
More Details ⟶
Stock Number: #23133
37.3 kW (50 HP) Stainless Steel 304 Mixer-Continuous
Motor Power: 50 HP
Diameter: 14 in
Length: 42 in
Orientation: Horizontal
Seal Type: Packing
Additional Information: Unit driven by Reeves varidrive 50 HP, max 1222 rpm, min 132 rpm. 14" dia x 42" low chamber. Drop door style. Packing gland on shaft.
More Details ⟶
Stock Number: #11845
Stainless Steel 304 Oakes 14MB-200A Mixer-Continuous
Motor Power: 200 HP
Orientation: Vertical
Seal Type: Mechanical
Additional Information: continuous plastic foam mixer. Double mech seal on shaft. Mixer enclosed in sound proof housing.
More Details ⟶
Stock Number: #220808
18.6 kW (25 HP) Carbon Steel Mixer-Continuous
Motor Power: 25 HP
Capacity (Design): 157 gallons
Diameter: 24 in
Length: 78 in
Orientation: Horizontal
Plow Type: Plows
Seal Type: Packing
More Details ⟶
Request a Quote

Shop used, surplus and secondhand continuous mixers from IPP – in stock for food, chemical, pharmaceutical and plastics applications

Optimize throughput with IPP’s ready-to-ship continuous mixers for uninterrupted, high-volume production

Used continuous mixers are designed to deliver consistent, uniform blending of materials in a nonstop flow. Ideal for high-volume processing, these mixers eliminate batch downtime while maintaining strict control over mixing quality and retention time. With more than 47 years of process industry experience, IPP supplies used, surplus and secondhand continuous mixing systems from 20 global plant sites and maintains a deep inventory of 15,000+ ready-to-ship systems.

IPP offers a range of continuous mixers from trusted manufacturers including Readco Kurimoto, Gericke, Littleford, Hosokawa, and Lödige.

Applications and industries

  • In food processing, for continuously mixing dough, cereals, protein powders and ready-to-eat products
  • In chemical and plastics manufacturing, for compounds, pigments, and resins that require uniform dispersion
  • In pharmaceutical production, for blending powders and granules with tight consistency control
  • In building materials and adhesives, for slurries, sealants and dry mortar

Types of materials processed

  • Free-flowing powders and granular blends
  • Slurries and pastes with medium to high viscosity
  • Moisture-sensitive compounds needing controlled exposure
  • Reactive materials requiring short residence times

Common materials of construction

Continuous mixers are engineered for durability, sanitation and process compatibility:

  • 316L stainless steel for hygienic and corrosion-resistant applications
  • Carbon steel or specialty alloys for rugged or chemical-duty use
  • Jacketed housings and shafts for heating, cooling or drying during mixing
  • Abrasion-resistant coatings or linings for abrasive or high-solids formulations

Key features of continuous mixers

  • Precise control over residence time, shear and feed rate
  • Twin-shaft or paddle-style agitators for consistent dispersion
  • Integrated feeding and discharge systems for full automation
  • Customizable mixing zones for layering, wetting or heating
  • Available in lab, pilot and large-scale production capacities

Explore how continuous mixing improves consistency and efficiency from Food Engineering.

Find your continuous mixer at IPP

Search the IPP inventory or contact IPP’s continuous process equipment team to find the right used, surplus or secondhand mixer. Whether scaling production or upgrading outdated systems, IPP delivers proven solutions at competitive prices.

FAQ

Mixer-Continuous FAQ

Have questions about Continuous Mixers or our services? Learn more about our products and why customers choose IPP.

What are the advantages of continuous mixing over batch mixing?
Continuous mixers offer consistent quality, reduced downtime, and better scalability for high-volume operations.
Can continuous mixers handle both wet and dry materials?
Yes – many models are designed to process powders, slurries and pastes with precise moisture and texture control.
How do I know if a continuous mixer is right for my process?
If your operation requires consistent output, short cycle times or high volumes, a continuous mixer may be ideal. IPP can help assess your needs.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP delivers savings, speed and service – with over 47 years of experience and 15,000+ systems available now.