Quote
Quote Cart
clear all items
All Equipment Ribbon & Paddle Mixers

Ribbon & Paddle Mixers - Used and Surplus Inventory | IPP

Used ribbon and paddle mixers for sale: proven blending for powders, granules and bulk solids

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Mixer-Ribbon & Paddle
Clear all filters
Featured

Top Ribbon & Paddle Mixers in stock

Highest-ranked available inventory for this selection.

Browse

Viewing Mixer-Ribbon & Paddle

No subtypes are available.

Mixer Types
Mixer-Banbury Mixer-Charge Can and Pony Mixer-Continuous Mixer-Disperser Mixer-Double Arm Mixer-Intensive Mixer-Muller Mixer-Munson and Rotating Mixer-Nauta Mixer-Ribbon & Paddle Mixer-Shot and Sand Mixer-Static Mixer-Twin Shell & Double Cone
Refine Results

Narrow these listings

Specifications
Results 34 items found

Available Ribbon & Paddle Mixers

Showing 25 of 34 matching Ribbon & Paddle Mixers.

Featured
Stock Number: #110637
Mixer-Ribbon & Paddle by Young Industrial Machinery Stainless Steel 304
Design Capacity: 10 ft3
Operating Capacity: 6 ft3
Vessel Pressure: 200 psi
Vessel Temperature: 3 °F
Ribbon Type: Double Helix
Length: 48 in
Width: 22 in
Height: 24 in
Additional Information: CS jacketed ribbon blender Internal pressure rated 3 psi @ 200 deg. F to -20 deg. F min.
Jacket is rated 60 psi @ 200 deg. F to -20 deg. F min. Blender configuration is full flat top cover with center bottom outlet. Shaft has stuffing box, ribbon design is removable, continuous double ribbon with Teflon wipers Shaft is driven through a Dodge shaft mounted reducer with a 24.7/1 gear reducer. Top cover is clamp on removable design. Top cover openings include 2-4", 1-8", 2-1", and 1 top feed/manway opening of 12"x16". Vessel is fully insulated. Center bottom outlet is approx. 6" and discharges through a knife gate into a Young motorized 2-3 hp delumper.
More Details ⟶
Featured
Stock Number: #208406
Mixer-Ribbon & Paddle SCHICHAU-GRIEP DS 160 Stainless Steel 321
Design Capacity: 706 ft3
Operating Capacity: 459.1 ft3
Ribbon Type: Single Helix
Additional Information: ribbon mixers with cylindircal housing, ribbon agitator stuffing box weight motor 660 kg, inlet and outlet filters
More Details ⟶
Featured
Stock Number: #208450
Stainless Steel 321 Loedige Littleford Ploughshare FKM 3000.D.4MZ.4ZF.4L Mixer-Ribbon & Paddle
Design Capacity: 105.9 ft3
Operating Capacity: 70.6 ft3
Vessel Temperature: 230 °F
Ribbon Type: Plows
Agitation Shaft Sealing: Packing
Length: 169.3 in
Width: 70.9 in
Height: 74.8 in
Additional Information: jacketed Loedige ploughshare mixer with choppers machine #7644 behalter #1952 jacket pressure 0.5 bar @ 110 deg C (180ltr) chamber 1110mm diameter x 2960mm straight side, internal rotor with (10) plow blades and (2) end blades, blades are removable via a reduction gearbox, packed gland on shaft, c/steel jacket on straight side only. (4) 321 s/steel choppers each belt driven by a 2-speed motor 7.5 kw 3/50/230/460/380/420 volt, 2950 rpm or 8.5 kw, 3/60/440/480 volt, 3510 rpm (8) spray nozzles, openings top: 3-350mm, jacket: 6-50mm, straight side: 2-540mm wide x 400mm high inspection doors, 2-50mm (for probes), bottom: 3-300mm long x 200mm wide each with a pneumatic operated valve, 8-25mm (spray nozzles,
More Details ⟶
Featured
Stock Number: #217872
Mixer Ribbon & Paddle Loedige Littleford Ploughshare FKM 1200 D2 Z Stainless Steel
Design Capacity: 42.4 ft3
Operating Capacity: 21.2 ft3
Vessel Pressure: 14.7 psi
Ribbon Type: Plows
Length: 92.5 in
Width: 66.9 in
Height: 74.8 in
Additional Information: • Plough share mixer without jacket rated internal atmospheric mixer included 2 choppers ,two doors for bottom discharge main V-belt drive data Main drive and gear box dismantled
More Details ⟶
Stock Number: #45799
Stainless Steel 316 Mixer-Ribbon & Paddle
Design Capacity: 250 ft3
Operating Capacity: 150 ft3
Operational mode: Batch
Ribbon Type: Paddles
Paddle/Ribbon MOC: Stainless Steel 316
Agitation Shaft Sealing: Packing
Length: 150 in
Width: 60 in
Additional Information: • Horizontal continuator . • Jacket rated 14.9 psi @ 250 degrees F. • SS cover, Pillow block bearings. • Unit has paddle type agitator with paddles running the length of the blender. • 24" x 24" rotary valve discharge
More Details ⟶
Stock Number: #208409
20 m3 (706 ft3) Stainless Steel 321 Mixer-Ribbon & Paddle
Design Capacity: 706 ft3
Operating Capacity: 459.1 ft3
Ribbon Type: Single Helix
Additional Information: with cylindircal housing ribbon agitator stuffing box weight motor 660 kg, inlet and outlet filters, and documents
More Details ⟶
Stock Number: #208410
20 m3 (706 ft3) Stainless Steel 321 Mixer-Ribbon & Paddle
Design Capacity: 706 ft3
Operating Capacity: 459.1 ft3
Ribbon Type: Single Helix
Additional Information: with cylindircal housing ribbon agitator motor : 500 V/78 A/50 Hz/1485 rpm weight motor 660 kg, inlet and outlet filters, and documents
More Details ⟶
Stock Number: #203129
8.5 m3 (300 ft3) Carbon Steel Mixer-Ribbon & Paddle
Design Capacity: 300 ft3
Operating Capacity: 200 ft3
Ribbon Type: Single Helix
Agitation Shaft Sealing: Packing
Length: 120 in
Width: 54 in
Additional Information: Jacketed, Carbon steel body and Jacket, 316 SS Clad internal(contact) Single Ribbon Mixer. with CS jacket. Packing glands on shaft, Chain drive with by approximately 30 HP motor and reducer.
More Details ⟶
Stock Number: #78681
Stainless Steel 304 Werner & Pfleiderer Simplex Mixer-Ribbon & Paddle
Design Capacity: 91.8 ft3
Operating Capacity: 70.6 ft3
Ribbon Type: Interrupted ribbon
Length: 122 in
Width: 70.9 in
Height: 94.5 in
Additional Information: jkt ribbon blender. Total capacity 2600 liter. Jkt rated 8 bar. 1470 rpm motor (no motor) 240 rpm input, 36 rpm output. Shaft 6" (150mm) dia. Openings: top 34" long x 16" wide, 1-9"; jkt 2-1", 4-1/2"; center btm outlet approx 8" dia w/pneumatically operated swing valve, discharging into chute 31" x 15". Fitted hinged full cover w/counter weight. Cover has vert charge hole approx 2'6" x 1'6" w/hinged cover.
More Details ⟶
Stock Number: #228346
Stainless Steel 304 Littleford Bros, Inc FKM-600-D Ribbon Paddle Mixer
Design Capacity: 28 ft3
Vessel Pressure: -14 psi
Jacket Temperature: 3 °F
Jacket Pressure: 7 psi
Jacket Type: Standard
Operational mode: Batch
Paddle/Ribbon MOC: Stainless Steel 304
Agitation Shaft Sealing: Packing
Length: 48 in
Width: 36 in
Height: 36 in
Additional Information: • Product contact Designed for batch operation. • Designed for vacuum operation to -25 "hg. • Internal finish polished to a 120 grit finish. • Center bottom discharge 15.5" ID.
More Details ⟶
Stock Number: #217882
Stainless Steel Other Mixer-Ribbon & Paddle
Design Capacity: 1.77 ft3
Operating Capacity: 1.06 ft3
Length: 1,400 mm
Width: 800 mm
Height: 1,800 mm
Additional Information: Laboratory stainless steel Loedige mixer with one chopper and one door (150mm) for bottom discharge Motor: 220/380 V main V-belt drive data: 2.2 kW, 220/380 V, 50 Hz, 1.4200 rpm
More Details ⟶
Stock Number: #205877
Stainless Steel 304 Mixer-Ribbon & Paddle
Design Capacity: 300 ft3
Operating Capacity: 275 ft3
Ribbon Type: Single Helix
Paddle/Ribbon MOC: Stainless Steel Other
Agitation Shaft Sealing: Packing
Length: 144 in
Width: 60 in
Height: 72 in
Additional Information: Ribbon Blender Size 300L, Single ribbon design, packing glands on shaft, removable ribbon design. Ribbon has a large sprocket on end of shaft for chain drive, no drive with unit. Blender trough is 60" wide x 144" long x 72" deep, with a bolted on SS cover The shaft measures 7 1/4" od.
More Details ⟶
Stock Number: #107553
Stainless Steel 316 Koppers EA26-6 Mixer-Ribbon & Paddle
Design Capacity: 15 ft3
Operating Capacity: 10 ft3
Ribbon Type: Paddles
Agitation Shaft Sealing: Packing
Length: 72 in
Width: 26 in
Height: 20 in
Additional Information: Unit has twin 2 1/2" diameter shafts with adjustable paddles. Packing glands on shafts. Has 2-section bolt on cover with 10" x 10" feed port, 12" x 16" with loose cover. 26" x 18" bottom discharge. 5 HP, 3/60/230/460 volt UL label, is not included.
More Details ⟶
Stock Number: #203241
Stainless Steel 316 Littleford Bros, Inc MGT125 Mixer-Ribbon & Paddle
Design Capacity: 4.4 ft3
Operating Capacity: 2.8 ft3
Ribbon Type: Paddles
Controls: Yes
Length: 80 in
Width: 48 in
Height: 72 in
Additional Information: 125 liter bowl capacity, Bowl type mixer with clamped flat top and pneumatic assist for raising the lid, lid has a 6" latching inlet and a 2" sanitary quick fitting. Unit has a 5" sanitary, pneumatic flush valve on side bottom of bowl for discharge. Sanitary polished finish on both internals and exterior. Unit has a high intensity mixing blade in bottom of the bowl and a high speed chopper through side wall. Air purge seals on chopper. Electric connections are plug in, air line is a quick coupling. Controls are self contained with the unit.
More Details ⟶
Stock Number: #232600
Stainless Steel 321 Will-Flow Mixer-Ribbon & Paddle
Design Capacity: 40 ft3
Operating Capacity: 26 ft3
Ribbon Type: Paddles
Paddle/Ribbon MOC: Stainless Steel 321
Agitation Shaft Sealing: Packing
Length: 62 in
Width: 36 in
Height: 37 in
Additional Information: jacketed Paddle Blender Rated for 50 psi at 300 degrees F 300 gallon liquid capacity. Scraped surface paddles.
More Details ⟶
Stock Number: #213607
Stainless Steel 304 Loedige Littleford Ploughshare KM8000 Mixer-Ribbon & Paddle
Design Capacity: 282.5 ft3
Operating Capacity: 176.6 ft3
Operational mode: Continuous
Ribbon Type: Plows
Length: 291 in
Width: 68 in
Height: 90 in
Additional Information: continuous mixing 25,000 kg/hr 8000 liter(2113 gallon) total capacity with (2) side hatches with hinged covers and hand wheel swing bolts, (1) 16" x 24" ID top drive end charge port, (1) 16" ID vent port top center, and (1) 17" x 20" ID bottom end discharge port. Internal shaft with plows 3/60/230/460 volt 1750 rpm down to 90 rpm Weight 17,200 lbs.
More Details ⟶
Stock Number: #207399
Stainless Steel 316 M.A.P SRL (Italy) WBHY 6000 Mixer-Ribbon & Paddle
Design Capacity: 211.9 ft3
Operating Capacity: 141.3 ft3
Ribbon Type: Plows
Agitation Shaft Sealing: Packing
Length: 274.8 in
Width: 1,600 mm
Height: 79.5 in
Additional Information: ploughshare mixer with (4) side choppers Job 167 Chamber is 1.5m I.D x 3370mm long packed glands on shaft shaft speed 74 rpm 2-speed motor chopper direct driven by a 2-speed motor, 5.5 kw, 3/50/220/240/380/420 volt, 1450 rpm or 6.4 kw, 3/60/250/280/440/480 volt, 1750 rpm,
openings top: 4-250mm x 250mm with pneumatic slide valves, 1-150mm, side: 2-750mm x 620mm inspection doors, 4-25mm, center bottom: 1-350mm x 250mm with actuated valve
More Details ⟶
Stock Number: #701967
0.5 m3 (17.7 ft3) Stainless Steel 316 Mixer-Ribbon & Paddle
Design Capacity: 17.7 ft3
Operating Capacity: 9.6 ft3
Agitation Shaft Sealing: Packing
Length: 48 in
Width: 24 in
Height: 27 in
Additional Information: paddle mixer 36 rpm. paddle speed.Packed glands. Unit has bottom discharge with manual valve.
More Details ⟶
Stock Number: #704157
0.1 m3 (3.5 ft3) Stainless Steel 316 Mixer-Ribbon & Paddle
Design Capacity: 3.5 ft3
Operating Capacity: 2.3 ft3
Ribbon Type: Interrupted ribbon
Agitation Shaft Sealing: Packing
Length: 90 in
Width: 51 in
Height: 51 in
Additional Information: "L" Series ribbon blender Features: hinged lid, removable endplate, interrupted ribbon, external bearings, packing glands 220/250/380/440 volt 69.3 rpm Unit with a built-in on/off switch. Openings: inlet 18" x 9"; outlet 1-4" with manually operated 'V' Series discharge valve.
More Details ⟶
Stock Number: #704868
1.2 m3 (42.4 ft3) Stainless Steel 316 Mixer-Ribbon & Paddle
Design Capacity: 42.4 ft3
Operating Capacity: 28.3 ft3
Ribbon Type: Single Helix
Agitation Shaft Sealing: Mechanical
Length: 76.8 in
Width: 35.4 in
Additional Information: Shape: cylindrical Mixer type: ribbon mixer Ribbon type: un-interrupted Shaft seal: mechanical 3/50/380/660 volt 1440/205 rpm non-flameproof geared motor External bearings on shaft. Openings: top 19" x 18" inspection cover with 6" opening, 1-9" feed with hopper, 1-6"; straight side (2) 18" x 18" inspection doors; bottom 6" x 70" long hydraulic operated discharge. Unit with 316 stainless steel 34" diameter x 7" straight side x 36" cone feed hopper.
More Details ⟶
Stock Number: #706111
Stainless Steel Other Alpine (Hosokawa) HMC-60 Mixer-Ribbon & Paddle
Design Capacity: 2.1 ft3
Operating Capacity: 1.41 ft3
Ribbon Type: Interrupted ribbon
Additional Information: Type: Ribbon blender ribbon speed 158 rpm (max) 3/50/380/415 volt hinged top cover,
More Details ⟶
Stock Number: #706112
0.05 m3 (1.77 ft3) Stainless Steel Other Mixer-Ribbon & Paddle
Design Capacity: 1.77 ft3
Operating Capacity: 1.17 ft3
Ribbon Type: Interrupted ribbon
Length: 47.2 in
Width: 11.8 in
Height: 13.8 in
Additional Information: Blender type: Ribbon blender via gearbox hinged top cover
More Details ⟶
Stock Number: #706876
Stainless Steel 304L WAM WBN21500C001 Mixer-Ribbon & Paddle
Design Capacity: 530 ft3
Operating Capacity: 353.1 ft3
Agitation Shaft Sealing: Packing
Length: 5,000 mm
Width: 74.8 in
Additional Information: 15000 liter 1.9m diameter x 5m straight side 400/415 volt 1477 rpm packed glands on shaft openings top: 3-498mm, side: 3-600mm x 550mm inspection doors, 2-90mm ( 1 with sampling device), bottom: 1-438mm x 438mm with manual slide valve (center)
More Details ⟶
Stock Number: #706481
0.66 m3 (23.3 ft3) Stainless Steel 321 Mixer-Ribbon & Paddle
Design Capacity: 23.3 ft3
Operating Capacity: 15.5 ft3
Ribbon Type: Interrupted ribbon
Agitation Shaft Sealing: Packing
Additional Information: ribbon blender with removable endplates external bearings, packing glands Ribbon speed 37 rpm
More Details ⟶
Stock Number: #706110
Stainless Steel Other Alpine (Hosokawa) HMC-60 Mixer-Ribbon & Paddle
Design Capacity: 2.1 ft3
Operating Capacity: 1.41 ft3
Ribbon Type: Interrupted ribbon
Length: 47.2 in
Width: 11.8 in
Height: 13.8 in
Additional Information: ribbon speed 158 rpm (max) 3/50/380/415 volt trough 1.2m long x 300mm wide x 350mm deep hinged top cover
More Details ⟶
Request a Quote

Get used, secondhand and surplus ribbon and paddle mixers from IPP – in stock and ready to ship for food, pharma and chemical industries

Improve blend consistency and throughput with IPP’s ready-to-ship ribbon and paddle mixers for batch powder mixing

Used ribbon and paddle mixers are industry-standard solutions for mixing dry powders, granules, and other bulk solids. Whether you’re blending spice mixes, pharmaceutical powders, plastic additives or construction materials, these mixers offer reliable, repeatable results. With more than 47 years of process industry leadership, IPP supplies used, surplus and secondhand ribbon and paddle mixers from 20 global plant facilities and maintains a massive inventory of 15,000+ ready-to-ship systems.

IPP offers single- and double-ribbon designs, paddle agitators, and hybrid models from trusted manufacturers like Ross, Munson, American Process Systems, and Jaygo.

Applications and industries

  • In food processing, for dry ingredient blending, seasoning mixes and nutritional powders
  • In pharmaceuticals, for batch mixing of excipients, active ingredients and granules
  • In chemicals and plastics, for additives, pigments, resins and fillers
  • In construction materials, for dry cement, grout blends, and gypsum products

Types of materials processed

  • Free-flowing and semi-free-flowing powders
  • Granules and pellets requiring uniform coating
  • Moist materials for light pastes or damp blending
  • Formulations requiring liquid spray injection or dust control

Common materials of construction

Built to meet diverse industrial needs, these mixers are available in:

  • 304 and 316L stainless steel for sanitary or corrosion-resistant applications
  • Carbon steel for general-duty powder processing
  • Abrasion-resistant lined designs for harsh solids
  • Jacketed versions for heating, cooling, or vacuum processing

Key features of ribbon and paddle mixers

  • Horizontal trough with center discharge and removable covers
  • Ribbon mixers feature inner and outer helical blades for counter-directional flow
  • Paddle mixers provide gentle, folding action for fragile ingredients
  • Models with spray bars, liquid injection, or vacuum design available
  • Easy cleaning, fast discharge, and efficient blending in short cycle times

Learn more about batch powder mixing technologies and ribbon mixer performance from Powder & Bulk Solids.

Find your ribbon and paddle mixer at IPP

Browse the IPP inventory or contact IPP’s powder mixing experts to find the right used, surplus or secondhand ribbon or paddle mixer for your process. With equipment in stock and ready to ship, IPP helps you reduce costs, lead time, and production risk.

FAQ

Mixer-Ribbon & Paddle FAQ

Have questions about Ribbon & Paddle Mixers or our services? Learn more about our products and why customers choose IPP.

What’s the difference between ribbon and paddle mixers?
Ribbon mixers offer faster, more aggressive mixing for homogenous blends, while paddle mixers are better for fragile or segregative materials due to their gentle tumbling action.
Can ribbon or paddle mixers be used with liquids?
Yes – many units feature liquid spray bars or injection ports for moistening powders or coating particles.
Are these mixers suitable for sanitary applications?
IPP offers models in polished 316L stainless steel with CIP access, ideal for food and pharmaceutical use.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP delivers immediate availability, substantial savings, and expert support—backed by over 47 years of experience serving the world’s leading manufacturers.