Quote
Quote Cart
clear all items
All Equipment Scrubbers

Equipment Search

Browse available industrial equipment and refine the listings by category, subtype, and specifications.

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Scrubber
Clear all filters
Featured

Top Scrubbers in stock

Highest-ranked available inventory for this selection.

Browse

Browse equipment types

Equipment categories could not be loaded. Use the search field above to find inventory.

Refine Results

Filter by specifications

No additional filters are available for this category yet. Try broadening the search or selecting a different type.

Results 12 items found

Available Scrubbers

Showing 12 of 12 matching Scrubbers.

Featured
Stock Number: #246703
Scrubber - Stainless Steel 316L by Letco
Height: 461 in
Width: 16 ft
Pressure: 15 psi
Temperature: 300 °F
Packing: Yes
Packing Type: Metal Pall Ring
Packing Amount: 72 ft3
Additional Information: Column is 4 sections bolted together. (bottom section is IPP # 246702) Price includes bottom section 246702 Packing is Norton 316L SS 1" pall Ring "Hy-Pak", support assemblies are Norton #818 and Liquid distributer is Norton # 845.
More Details ⟶
Featured
Stock Number: #233229
Scrubber - Packaged scrubber system by Schutte & Koerting
Air Flow Rate: 82 CFM
Height: 106 in
Width: 7 ft
Liquid Flow Rate: 60 GPM
Pressure: 0.54 psi
Removal Rate Percentage: 95
Packing: Yes
Packing Type: Other
Packing Amount: 5 ft3
Additional Information: Vapors handled: NH3, N2, toluene vapor, 100 #/hr HCL, 180 #/hr SOC12 vapor
More Details ⟶
Featured
Stock Number: #233198
Scrubber - Packaged Scrubber System by Schutte & Koerting
Air Flow Rate: 82 CFM
Height: 106 in
Width: 7 ft
Liquid Flow Rate: 70 GPM
Pressure: 0.58 psi
Removal Rate Percentage: 95
Temperature: 200 °F
Packing: Yes
Packing Type: Other
Packing Amount: 5 ft3
Additional Information: • Vapors handled: NH3, N2, toluene vapor, 100 #/hr HCL, 180 #/hr SOC12 vapor
More Details ⟶
Stock Number: #222968
Stainless Steel Other Reschka GmbH Scrubber
Air Flow Rate: 0.3 m3/h
Width: 0.49 ft
Pressure: 0.5 bar
Temperature: 160 °C
Additional Information: exhaust air scrubber, pressure rated -1/0,5bar @ -10/160 degrees C, mounted on a carbon steel frame with a 150 mm diameter stainless steel body scrubber column with carbon steel rushig rings pressure rated 6bar@ 50 degrees C, with a pump, manufactured by Dickow, type WPVh2561, serial number 03175440 motor type FFD80K4FDS/6612 motor and pump are CE stamped.
More Details ⟶
Stock Number: #221745
Scrubber
Height: 78.7 in
Width: 0.54 ft
Pressure: 0.3 bar
Temperature: 150 °C
Additional Information: glass scrubber system consisting of (1) Schott QVF packed column, 165mm diameter x 2m high, (1) Schott QVF glass packed column, 225mm diameter x 2m high,
More Details ⟶
Stock Number: #246465
Fiberglass Scrubber
Air Flow Rate: 360 CFM
Height: 360 in
Width: 2.3 ft
Liquid Flow Rate: 100 GPM
Pressure: 14 psi
Temperature: 130 °F
Packing: Yes
Packing Type: Structured
Additional Information: Using caustic to scrub acid. Fan was removed, we can replace it. Packed section 4.5 feet, with structured mesh packing. Multiple spray bars at top of tower, 3" feed/spray line, 4" return line. 14" gas inlet. Scrubber fan speed 3600 rpm.
More Details ⟶
Stock Number: #233197
Lined Schutte & Koerting Scrubber
Air Flow Rate: 82 CFM
Height: 106 in
Width: 6 ft
Liquid Flow Rate: 60 GPM
Pressure: 5 psi
Removal Rate Percentage: 95
Temperature: 200 °F
Packing: Yes
Packing Type: Other
Packing Amount: 5 ft3
Additional Information: Vapors handled: NH3, N2, toluene vapor, 100 #/hr HCL, and 180 #/hr SOC12 vapor The system uses various recirculation streams depending on the vapors and removes 95-85% of the vapors depending on the conditions. The system utilizes CS construction for the tank and column, lined with “Flouroshield” Teflon, and also included are a recirculation pump and heat exchanger. The system design rating is FV/5 psig at 5-200 degrees F. The pump is a Gould’s size 1 x 1.5 x 8, model 3298, mag drive, and a Tefzel liner, driven by a 7.5 hp. Ex. Proof motor The heat exchanger is an APV Model SRS MS-12 with Hastelloy C-276 wetted parts and a surface area of 101.8 Sq.Ft. The column packing is Hi flow 5/8” rings manufactured from PFA Teflon, With an Otto York mist eliminator Complete package system base mounted on a CS base 9’ long x 7’ wide. Top of the column is 106” high.
More Details ⟶
Stock Number: #232531
203.9 m3/h (120 CFM) Fiberglass Scrubber
Air Flow Rate: 120 CFM
Liquid Flow Rate: 160 GPM
Pressure: 0.22 psi
Removal Rate Percentage: 80
Temperature: 150 °F
Packing: Yes
Packing Type: Plastic Tellerete
Packing Amount: 15 ft3
Additional Information: Typical operating conditions: Recirculation to VF573 is 15-21 GPM. Recirculation to VF572 is 0.5-0.7 GPM 10% Naoh is make up to VF574 (not supplied) Discharge stream dependent on pH and temperature. Fiberglass (Derakane 470), acid mist scrubbing system. Designed to treat acid laden fumes prior to atmospheric discharge. Manufactured by Celicote, model SPT-12-60. Rated for -2” WC to +6” WC up to 150 degrees F. Major components are tower VF573, VF574, tower VF 572, and pumps, IPP stock numbers 233893 and 233896 Tower VF573 is Fiberglass Derakane 470, and bolts by a flange to vessel VF574 Its specifications are 24” diameter x 186” overall length. Flange for bolting to tank is 24”. Side mounted nozzles are one 9”, two 8”,two 4.25”, and two 4” Outlet flange is 6”. This column is packed with saddles. Recirculation tank (VF574) is fiberglass (Derakane 470) , and has a capacity of 1200 gallons It is 64” diameter x 105” long with dished heads , and has the following nozzles: One 24” nozzle for VF573, one 19” top nozzle, two 5” nozzles, one 3” nozzle and four 1.5” nozzles Secondary gas stream flow is handled by VF572, Derakane 470, packed tower containing plastic tellerettes This tower is 15” diameter x 151” long, and has one 6” nozzle, two 4” nozzles, three 1.5” nozzles, and one 1” nozzle. Recirculation is handled by a Teflon lined centrifugal pumps, (IPP stock numbers 233896 & 233893) one is operational and the other an in line spare. Their specs are as follows: 160 GPM at 80 Ft./Hd., Teflon lined wetted end, horizontal centrifugal pump. Manufactured by Durco. Mark II Serial # 0605-2071. 3 x 2 x 10 with a mechanical seal on shaft. Base mounted and direct driven. Powered by a Reliance Duty Master 10 HP AC motor. rated for 1755 rpm, 230/460 volt, 23.8/11.9 amp, 3 phase 60 Hz. TEFC Enclosure. Frame L 215 T. 50" long x 22" wide x 22" high. Typical operating conditions are as follows: Recirculation to VF573 is 15-21 GPM. Recirculation to VF572 is 0.5-0.7 GPM. 10% Naoh is make up to VF574.(not supplied) Discharge stream dependent on pH an temperature. Blowers not available but can be supplied separately.
More Details ⟶
Stock Number: #233227
Carbon Steel Schutte & Koerting NH3, N2, Toluene, HCl, & SOC vapors Scrubber
Air Flow Rate: 82 CFM
Height: 106 in
Width: 6 ft
Liquid Flow Rate: 60 GPM
Pressure: 5 psi
Removal Rate Percentage: 95
Temperature: 200 °F
Additional Information: 82 acfm- 28 acfm 4”- 48” Packaged scrubber system Designed to handle an 82 acfm gas stream of NH3, N2 and toluene vapor at 15” wc It will also handle 28 acfm of 100 #/hrHCL and 180 #/hr of SOC12 vapor The system uses various recirculation streams depending on the vapors and removes 95-85% of the vapors depending on the conditions The system utilizes CS construction for the tank and column, lined with “Flouroshield” Teflon, and also included are a recirculation pump and heat exchanger mag drive and a Tefzel liner Ex. Proof motor The column packing is Hi flow 5/8” rings manufactured from PFA Teflon, With an Otto York mist eliminator. Complete package system base mounted on a CS base 8’ long x 6’ wide Top of the column is 106” high
More Details ⟶
Stock Number: #233300
Lined Shutte & Koerting Scrubber
Additional Information: • Ambient temperature and pressure.
More Details ⟶
Stock Number: #245840
4,500 m3/h (2,650 CFM) Plastic Scrubber
Air Flow Rate: 2,650 CFM
Height: 196.9 in
Width: 1,400 m
Temperature: 35 °C
Packing: Yes
Additional Information: 1.4m diameter Polypropylene scrubber column system, manufactured by Malaguti Impianti, 4500 m3/hr flow, column capacity 1500 liter, coned top, flat bottom, internal spray pipes, pipework,
More Details ⟶
Stock Number: #233228
Lined Other Shutte & Koerting Scrubber
Air Flow Rate: 82 CFM
Height: 106 in
Width: 6 ft
Liquid Flow Rate: 60 GPM
Pressure: 0.58 psi
Removal Rate Percentage: 95
Packing: Yes
Packing Type: Metal Pall Ring
Additional Information: Gas stream: NH3, N2, toluene vapor (82 acfm at 15" wc), HCL (28 acfm at 100#/hr), SOC12 vapor (180#/hr) Tank and column construction: CS construction, lined with "Flouroshield" Teflon
More Details ⟶
Request a Quote

IPP offers secondhand and surplus scrubbers that are cleaned, inspected, and ready to ship

Improve emissions control and save time with used scrubbers from IPP’s global inventory

Used scrubbers are critical to air pollution control in industrial settings, removing particulates, hazardous gases, and vapors from process streams. Whether you need a packed bed scrubber for chemical neutralization or a venturi scrubber for particulate removal, IPP offers ready-to-ship gas scrubbing systems from 20 plant sites worldwide. With over 47 years in business, IPP supplies more than 15,000 pieces of process equipment to customers in pharma, chemical, food, and energy industries.

IPP’s inventory includes wet scrubbers, dry scrubbers, spray towers, packed towers, and multi-stage systems from brands such as Ducon, Monsanto Enviro-Chem, Croll-Reynolds, and CECO.

Industries and applications

  • In chemical manufacturing, for controlling acid gases and VOCs
  • In pharmaceutical plants, to neutralize hazardous fumes
  • In power generation, for SO₂ and NOx removal
  • In metal and mineral processing, for capturing particulate emissions
  • In wastewater treatment, for odor control and gas scrubbing

Materials processed or treated

  • Sulfur dioxide (SO₂), hydrogen chloride (HCl), ammonia (NH₃)
  • Volatile organic compounds (VOCs)
  • Acid mists and particulates
  • Combustion byproducts and process emissions

Common materials of construction

  • Fiberglass reinforced plastic (FRP) for corrosion resistance
  • Stainless steel for clean, high-performance systems
  • Polypropylene or PVC for lightweight, chemically inert units
  • Carbon steel for general-purpose applications

Key features of used scrubbers

  • High-efficiency pollutant removal
  • Compact, skid-mounted options available
  • Custom configurations with fans, pumps, and controls
  • Multi-stage designs for simultaneous gas and particulate removal
  • Proven designs with years of field service

Learn more about scrubber technologies and performance factors via the U.S. EPA.

Find your scrubber equipment at IPP

Browse IPP inventory or contact IPP to speak with a gas scrubbing expert. Whether you need a simple packed tower or a complex multi-gas system, IPP can help you save time and money with surplus scrubbers in stock.

FAQ

Scrubber FAQ

Have questions about Scrubbers or our services? Learn more about our products and why customers choose IPP.

What types of scrubbers are available from IPP?
IPP offers wet, dry, packed bed, venturi, and spray tower scrubbers for a variety of industrial applications.
Are IPP’s scrubbers rated for hazardous gas removal?
Yes. Many of IPP’s scrubbers are designed for acid gas and VOC control and can be rated for corrosive applications.
Can I integrate these scrubbers into an existing air handling system?
Absolutely. IPP offers standalone units and scrubbers that can be integrated into current plant layouts.
What are the benefits of buying used or secondhand scrubber systems from IPP?
You’ll reduce lead time and cost while getting professionally inspected systems with proven reliability.