Flow Rate
Measure
Quote Cart
Used industrial pumps for sale: cost-effective solutions for fluid handling and processing
Highest-ranked available inventory for this selection.
Used industrial pumps for sale: cost-effective solutions for fluid handling and processing
Choose a subtype for a more focused set of listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Enter a keyword to match this specification.
Showing 25 of 722 matching Pumps.
This Aquadyne 3300DST is a robust, mobile, Detroit Diesel-powered reciprocating pump built to deliver very high pressure (up to 10,000 psi) at 45 GPM. Its design makes it well-suited for clean-in-place (CIP) operations—such as high-pressure tank washing—where reliability and performance are critical. This system includes a tank pressure washing module for installation on manways to perform CIP operations.
diesel centrifugal firewater pump system system consists of:(1) skid mounted 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" CMBB, serial #690603/1, 2000 rpm, packed gland on shaft, driven by a Leyland diesel engine, unit # CPU-3836, type PU401/21/3, engine # 911288, type UE401/113/3, tappet clearance 020" cold, injection 26 deg before top dead center, firing order 153624, exhaust with a silencer,(1) electric driven back up pump, 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" E-NE-B, serial # 690602/1, 3000 rpm, packed gland on shaft, direct driven by 60 hp, 3/50/380/420 volt, 2940 rpm motor,(1) Jockey pump with gauges and valves(1) control panel
3-step Membrane dosing/metering pump with vent screw on each pump head 1.4571 pulsation absorber 0,5 l, G 3/8’’, Element A: 1100 l/h @ max 10.5 bar Element B and C: 550 l/h @ 4.2 bar
3/50/400/690 volt,
1.5 m3/hour at 150 bar 24-64 lift/minute,
2000 to 5000 cubic meter per hour triple head diaphragm pump working pressure 80 bar, max permissible working pressure 100 bar @ -196 degrees C driven by a 2-speed motor 52kw, 3/60/440/480 volt, 1770 rpm motor via a Lenze type 12.602.32.15 (5) 321 stainless steel valves,
25 Ra electropolished internal finish with a silicon carbide double mechanical seal. Viton is the elastomer material.
8" x 6" impellor. Vert split, end suction, top discharge. No motor. takes 900 HP, 3600 rpm motor. 4000 Volts.
CD4MCu (austetic SS) belt driven by a Marathon
Size 4 x 6-13H.
Size 4 x 6-13H
Size 4 x 6-13H
Size 4 x 6-13H
(5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 rated 233 HP, 1460 /116 rpm Motor: 345 A CE stamped Includes shell and tube cooler, and lubricating pump
Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 rated 233 HP, 1460 /116 rpm Motor: 345A CE stamped Includes shell and tube cooler, and lubricating pump
316 stainless steel Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 3~/50Hz/500V/345A/1488rpm motor, Includes shell and tube cooler, and lubricating pump
Peroni piston pump (5) 80mm diameter pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 serial#:37406 rated 233 HP, 1460 /116 rpm Motor: 345A Includes shell and tube cooler, and lubricating pump
Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 3~/50Hz/500V/345A/1488rpm motor Includes shell and tube cooler and lubricating pump
wetted end direct driven Motor ID #: 6753220-2 Motor model #: P28G398H G7 XQ Motor amperage: 34.1 Motor weight 385 lbs
direct driven Motor: 20 HP Reliance XEX AC motor Model #: P28G467L Amperage: 24.8 amps
Pump type: Tri-Clover rotary lobe pump. Fittings: Sanitary x-proof electric motor Output torque: 8292
flon lined wetted end direct driven 27.0/13.5 amp Motor weight 165 lbs
Used industrial pumps from IPP encompass a wide range of machinery essential for fluid handling and processing across various industries. Whether you require centrifugal, positive displacement, or vacuum pumps, IPP offers equipment that meets your specific needs. With over 47 years of industry experience, IPP supplies used, surplus, and secondhand pump equipment from 20 global plant sites and maintains a ready-to-ship inventory of 15,000+ process systems.
IPP stocks equipment from leading manufacturers such as Goulds, Flowserve, Alfa Laval, and Waukesha, ensuring quality and reliability.
To ensure durability and compliance, pump equipment is typically constructed from:
Discover how used industrial pumps can enhance your processing efficiency at Machinery & Equipment Co.
Have questions about Pumps or our services? Learn more about our products and why customers choose IPP.
