Quote
Quote Cart
clear all items
All Equipment Extruders

Extruders - Used and Surplus Inventory | IPP

Used extruders for sale: high-output shaping and compounding for polymers, food and chemical applications

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Extruder
Clear all filters
Featured

Top Extruders in stock

Highest-ranked available inventory for this selection.

Browse

Viewing Extruder

No subtypes are available.

Refine Results

Narrow these listings

Specifications
Results 31 items found

Available Extruders

Showing 25 of 31 matching Extruders.

Featured
Stock Number: #703669
Extruder by Reifenhausser Kg RH381-1-70 Stainless Steel 316
Diameter: 2.8 in
Feeder: Yes
Heating type: Electric
L/D Ratio: 30:1
Additional Information: single screw extruder line General purpose screw and feed hopper. Production rate: 75 Kg/hr maximum polypropylene. Barrel has (8) heaters with (3) electric fans Extruder driven by a 60 HP (46 KW) DC motor. Line is complete with a15' long x 12" wide x 8" deep stainless steel cooling bath with air knife and (1) automatic 100mm granulator, Type ASG-10, serial #00-015-2204. Driven by 2.2 KW motor. Extruder is complete with control panels.
More Details ⟶
Featured
Stock Number: #706425
Bone Brothers Extruder 63mm
Diameter: 63 mm
Feeder: Yes
Additional Information: 63mm, single screw extrusion line, approx 60 kg/hr of 800mm wide plastic sheet), line consists of: (1) Bone Brother 63mm x 2m long c/steel single screw extruder, motor with cooling fan, barrel with (5) fans driven by 0.33 kw, 3/50/415 volt, 2800 rpm motors, 126mm x 38mm feed opening with s/steel feed hopper, (1) 3-roll calender, rolls 300mm diameter x 800mm long, rolls with mirror finish, each roll is oil heated with its own oil heater, each roll gap adjuster has a hydraulic ram driven by 4 kw, 3/50/380-420 volt, 1435 rpm motor vai a Eurodrive gearbox, the calender is mounted on a moveable skid , skid has a hydraulic raise/lower mechanism, (1) end of line Gillard & Co sheet cutter, mounted on wheels, totally enclosed in a cabinet, system with control panels.
More Details ⟶
Stock Number: #706693
65 mm (2.6 in) Carbon Steel Extruder
Diameter: 65 mm
Number of Heating Zones: 5
Screw Length: 1,600 mm
Feeder: Yes
Heating type: Electric
Additional Information: twin screw Ko-Kneader system, (1) Baker Perkins 800mm diameter chilled drum roll cooler, series 2000, serial #65712, drum with pre-breaker and Kibbler granulator, granulator driven by 10HP, 1500 rpm motor, pre-breaker driven by 1HP, 150 rpm motor, chill roll motor driven by 5 HP, 25 rpm motor, (2) 350 liter high intensive mixers, driven by 37kw, 3/50/415 volt, 1475 rpm motor, (1) chiller, (1) buffer hopper with bag filler
More Details ⟶
Stock Number: #706691
Carbon Steel Buss TCS-70-16D Kneader Extruder
Diameter: 70 mm
Number of Heating Zones: 5
Screw Length: 1,300 mm
Feeder: Yes
Number of Cooling Zones: 1
Additional Information: single screw Ko-Kneader system, proceesing length 16 L/D, carbon steel heated screw, screw oscillation stroke 10.5mm, screw root diameter 45mm, Theoretical pitch in kneading zone (2-spirals) 42mm, pitch in infeed zone (1-spiral) 38mm, free zone (5-barrel section) 2.04 dm3, screw driven by a 2-speed motor, 45kw, 3/50/380/400/415/660/690 volt, 1480/1475 rpm or 55kw, 3/60/440 volt, 1775 rpm, cast chrome steel barrel, barrel with special high nickel content carbon steel liner and kneading pins, barrels steam/water heated, (4) Regloplas type P160/9/SG5/IK/R145 water/steam heater temperature controllers, 6.5 ltr volume, rated 6 bar @ 160 deg C, (1) 600mm wide x 3m long chilled rubber belt conveyor with Netzsch Condux Granulator, (2) Tricool chillers, 2) 21.6 cubic foot (0.6 cubic meter) carbon steel ribbon mixer, 550mm wide x 1680mm long x 700mm deep, interupted ribbon, driven by 7.5 hp, 3/60/415 volt, 1405 rpm motor, end bottom discharge with pneumatic operated slide valve, 2-650mm x 650mm inspection ports with hinged covers,
More Details ⟶
Stock Number: #705278
Aluminum Extruder
Diameter: 9.5 in
Temperature: 90 °C
Feeder: Yes
Heating type: Electric
Additional Information: single screw plodder/extruder. Production rate: 500 Kg/hr maximum (soap) Worm speed ? rpm Cast iron barrel and removable nose cone, both with aluminum lining, aluminum worm screw. Barrel with cooling/heating jacket, nose cone with electric heater. Unit with feed hopper. Hopper with roll feeder, 1.1 KW, 3/50/220/380 volt, 1390-42 rpm geared motor (1) carbon steel screw. Control panel. Unit base mounted.
More Details ⟶
Stock Number: #78337
Aluminum Sterling Extruder
Diameter: 1.5 in
Number of Heating Zones: 3
Screw Length: 31.5 in
Barrel MOC: Aluminum
Heating type: Electric
L/D Ratio: 21:1
Additional Information: Sterling Having 3-zone electrically heated water cooled non-vented Xaloy 306 lined barrel. Barrel water cooling system utilizes cast aluminum heaters in a closed loop system including reservoir pump and heat exchanger Extruder barrel has (3) int pressure readout devices installed and discharge end terminates w/split clamp assembly Extruder feed section is jkt w/round on center feed opening and has int flow surfaces nickel plated DC motor connected to reducer via belts and pulleys for an approx max screw speed of 100 rpm Extruder presently caster mtd for mobility at a56" centerline height. Temp control panel is free standing and has Eurotherm EM-1 control system for (3) barrel, (1) gate and (3) accessory zones. Extruder supplied w/total of (2) Duranickel fabricated screws. Electricals: 3/60/230 volt.
More Details ⟶
Stock Number: #706873
Carbon Steel Francis Shaw & Co. LTD. Extruder
Diameter: 35 mm
Barrel MOC: Carbon Steel
Heating type: Electric
Additional Information: 1m long carbon steel Extruder electric heated barrel
More Details ⟶
Stock Number: #224195
60 mm (2.4 in) Carbon Steel Extruder
Diameter: 60 mm
Number of Heating Zones: 5
Screw Length: 1,800 mm
Feeder: Yes
Heating type: Electric
L/D Ratio: 30:1
Additional Information: Axon Polystyrene Single screw extruder system throughput of approximately 5 ton/hour screw driven by 30kw, 3/50/380/660 volt, system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry granulator, manufactured by Cumberland, model 20-strand, 321 stainless steel rotor with cutting blades, driven by 15 kw, 3 phase, 50/60 Hz, 380/400/415/460/660/690 volt, 970/975/1180 rpm IE2 CE motor, aluminium chamber with hinged top inspection cover, mounted on a carbon steel frame with wheels, local panel mounted on the frame, (1) 900mm x 1750mm long 321 stainless steel 2 deck vibratory screen, manufactured by Vihab Vibrerande Hantering AB (Sweden), type L2S, serial #1319-584-11, (2) vibratory motors, approximately 1.1 kw (in), 3/50/230/400 volt, 1500 rpm, (1) motorised rotary lock valve, mounted on a carbon steel frame, frequency converter, control panel,
More Details ⟶
Stock Number: #706692
Carbon Steel SMS Buss TCS-100-16D Kneader Extruder
Diameter: 99.8 mm
Number of Heating Zones: 5
Screw Length: 1,900 mm
Barrel MOC: Stainless Steel Other
Heating type: Steam
L/D Ratio: 16:1
Number of Cooling Zones: 1
Additional Information: single screw Ko-Kneader system, processing length 16 L/D, carbon steel heated screw, 15mm screw oscillating stroke, screw root diameter 65mm, Theo. pitch in kneading zone (2-spirals) 60mm, pitch in infeed zone (1-spiral) 55mm, free volume (5 barrel section) 5.35 dm3, screw driven by a 2-speed motor, 90kw, 3/50/380/400/415/660/690 volt, 1481/1483/1485 rpm or 105kw, 3/60/440 volt, 1780 rpm, cast chrome steel barrel, barrel with special high nickel content carbon steel liner and kneading pins, barrels steam/water heated, (4) Regloplas type P160 water/steam heater temperature controllers for barrel heating, 6.5 liter volume, rated 6 bar @ 160 deg C, (1) 1m wide x 4m cooling length carbon steel chilled conveyor, manufactured by Bergerbachmann, belt driven by approx 1.1kw motor, 200mm diameter squeezing roll, 400mm diameter cooling roll, conveyor with Netzsch Condux carbon steel Granulator, type CS-300-800-11, serial # 6889, rotor speed 600 rpm, (2) Mixaco SM-600-D stainless steel high intensity mixers, 600ltr capacity, driven by 45kw, 3/50/400/690 volt 740 rpm motor, air pressure 6 bar, total volume 750 liter, 1180mm diameter x 690mm deep, 350mm feed, 300mm discharge with valve, each mixer with it own bag charging station
More Details ⟶
Stock Number: #703671
20 mm (0.79 in) Carbon Steel Extruder
Diameter: 0.79 in
Number of Heating Zones: 4
Screw Length: 420 mm
Feeder: Yes
Heating type: Electric
Additional Information: Bone Brothers lab size single screw extruder. Unit has (4) electrically heated zones. Unit is complete with 7" diameter x 5" high stainless steel feed hopper cooling bath and control panel.
More Details ⟶
Stock Number: #705279
70 mm (2.8 in) Stainless Steel 316 Extruder
Diameter: 2.8 in
Heating type: Electric
Additional Information: Laboratory Simplex Production rate: 70 Kg/hour maximum (soap). Speed 4.3-25.8 rpm screws rotate in opposite directions, (side by side), double jacket for cooling. (1) electric heater. Extruder driven by 1.1 KW, 3/50/220/380 volt, 2800 rpm motor Unit with spare barrel and screws. Base mounted.
More Details ⟶
Stock Number: #85782
Welex 17518:1-COX Extruder
Diameter: 1.75 in
Number of Heating Zones: 2
Screw Length: 36 in
Heating type: Steam
Additional Information: 1.75" x 36" 1 1/2" inlet water cooled 2-zone steam heated Drive 20 HP, DC volt, 500 volt arm. 300 volt field motor, max 1750 rpm thru Lufkin gear reducer, 9.91:1 ratio, 175 rpm output speed. Mtd in frame 5' wide x 6' high x 3' deep.
More Details ⟶
Stock Number: #210323
Werner & Pfleiderer ZSK83 Extruder
Diameter: 83 mm
Number of Heating Zones: 8
Heating type: Electric
L/D Ratio: 20:1
Number of Cooling Zones: 7
Additional Information: twin screw extruder Two 3,27 mm screws Electric heated barrel with water cooled jacket 68” long, 3” diameter discharge Unit is base mounted cooling water circulating skid
More Details ⟶
Stock Number: #104127
Unused Betol 4024 Extruder
Diameter: 1.57 in
Number of Heating Zones: 6
Screw Length: 37.8 in
L/D Ratio: 24:1
Additional Information: extrusion/film line (4) 12 KW for barrel w/screw speed indicator and ammeter Electrical supply 3 phase, 50 cycle, 380/440 volt Screw and barrel made of high grade corrosion resistant steel alloy (1) Betol Mdl 0250 film tower Production capacity max 450mm lay flat Electrical supply 3 phase, 50 cycle, 380 volt, 2.3 KW (2) Nip rolls: (1) chrome plated and (1) rubber. Nip rolls driven by .75 KW DC motor, 180 volt arm, 200 volt field, 1500 rpm, w/geabox, output 0-50 rpm Coiler Reel - core is 76mm inside dia cardboard core, reel size from core to max of 480mm dia. Coiler Reel driven by .37 KW DC motor, 180 volt arm, 200 volt field, 1500 rpm. Air supply 4.2 - 5.6 Kg/sq cm.
More Details ⟶
Stock Number: #210304
Werner & Pfleiderer ZSK58 F96 Extruder
Diameter: 58 mm
Heating type: Electric
L/D Ratio: 36.9:1
Additional Information: twin screw extruder Electric heated barrel with water cooled jacket 84” long (Consisting of 9 blocks each 9.45"), 2.2” diameter discharge Rated for 96 Kpm torque per shaft or 960Nm Outer screw diameter is 57.8 mm Flight depth is 10,3mm. Maximum torque on nscrew shafts is 1920Nm Unit is base mounted cooling water circulating skid
More Details ⟶
Stock Number: #224192
Carbon Steel Axon PXR-60D Extruder
Diameter: 60 mm
Number of Heating Zones: 5
Screw Length: 1,800 mm
Feeder: Yes
Heating type: Electric
L/D Ratio: 30:1
Additional Information: Axon carbon steel Single screw extruder system, throughput of approximately 5 ton/hour, screw driven by 30kw, 3/50/380/660 volt, system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry granulator, manufactured by Cumberland, model 20-strand, 321 stainless steel rotor with cutting blades, driven by 15 kw, 3 phase, 50/60 Hz, 400/380/415 volt, 981/982/1184 rpm IE2 CE motor, aluminium chamber with hinged top inspection cover, mounted on a carbon steel frame with wheels, local panel mounted on the frame, (1) 900mm x 1.9m long 321 stainless steel 2 deck vibratory screen, manufactured by Vihab Vibrerande Hantering AB (Sweden), type L2S, size 0.9 x 2.25, serial #130107117-12, (2) vibratory motors, type VV40B/4, 1.1 kw (in), 3/50/230/400 volt, 1500 rpm, (1) motorised rotary lock valve, mounted on a carbon steel frame, frequency converter, control panel,
More Details ⟶
Stock Number: #224193
60 mm (2.4 in) Carbon Steel Extruder
Diameter: 60 mm
Number of Heating Zones: 5
Screw Length: 1,800 mm
Feeder: Yes
Heating type: Electric
L/D Ratio: 30:1
Additional Information: Axon carbon steel Single screw extruders system throughput of approximately 5 ton/hour, screw driven by 30kw, 3/50/380/660 volt, system includes (1)15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry granulator, manufactured by Cumberland, model 20-strand, 321 stainless steel rotor with cutting blades, driven by 15 kw, 3 phase, 50/60 Hz, 400/380/415 volt, 981/982/1184 rpm IE2 CE motor, aluminium chamber with hinged top inspection cover, mounted on a carbon steel frame with wheels, local panel mounted on the frame, (1) 900mm x 1.9m long 321 stainless steel 2 deck vibratory screen, manufactured by Vihab Vibrerande Hantering AB (Sweden), type L2S, size 0.9 x 2.25, serial #130107117-11, (2) vibratory motors, type VV40B/4, 1.1 kw (in), 3/50/230/400 volt, 1500 rpm, (1) motorised rotary lock valve, mounted on a carbon steel frame, frequency converter, control panel,
More Details ⟶
Stock Number: #224194
Carbon Steel Axon PXR-60D Extruder
Diameter: 60 mm
Number of Heating Zones: 5
Screw Length: 1,800 mm
Feeder: Yes
Heating type: Electric
L/D Ratio: 30:1
Additional Information: Axon carbon steel Single screw extruders system throughput of approximately 5 ton/hour screw driven by 30kw, 3/50/380/660 volt system includes (1) 15 Kw 321 stainless steel type 20-48T plastic 'Utiliser' dry granulator, manufactured by Cumberland, model 20-strand, 321 stainless steel rotor with cutting blades, driven by 15 kw, 3 phase, 50/60 Hz, 400/380/415 volt, 981/982/1184 rpm IE2 CE motor, aluminium chamber with hinged top inspection cover, mounted on a carbon steel frame with wheels, local panel mounted on the frame, (1) 900mm x 1750mm long 321 stainless steel 2 deck vibratory screen, manufactured by Vihab Vibrerande Hantering AB (Sweden), type L2S, serial #1319-584-12, (2) vibratory motors, approximately 1.1 kw (in), 3/50/230/400 volt, 1500 rpm, (1) motorised rotary lock valve, mounted on a carbon steel frame, frequency converter, control panel,
More Details ⟶
no image found
Stock Number: #706267
Extruder
Additional Information: with chrome screw and chrome lined barrel. Jacketed barrel for cooling, hinged longitudinally for cleaning and maintenance.
More Details ⟶
no image found
Stock Number: #237024
Extruder
Additional Information: Plodder Rated 2,000 kg/Hr.
More Details ⟶
no image found
Stock Number: #237025
Extruder
Additional Information: Plodder Rated 2,000 kg/Hr.
More Details ⟶
no image found
Stock Number: #237086
300 mm (11.8 in) Extruder
Diameter: 300 mm
Number of Heating Zones: 2
Additional Information: Plodders single worm two stage. Rated for 2,000 kg./Hr.
More Details ⟶
no image found
Stock Number: #237087
Extruder
Pressure: 220 bar
Additional Information: Plodders Rated for 220 bars per minute
More Details ⟶
no image found
Stock Number: #237009
Extruder
Additional Information: Plodders Line speed 220 bars/minute
More Details ⟶
no image found
Stock Number: #237010
Extruder
Additional Information: Plodders Line speed 220 bars/minute
More Details ⟶
Request a Quote

Shop used, surplus and secondhand extruders from IPP – in stock and trusted for consistent, high-volume production

IPP’s ready-to-ship extruders for plastics, food, rubber and specialty materials always save you time & money

Used extruders are continuous processing systems designed to shape, compound or blend materials by forcing them through a die under pressure. Whether you’re producing plastic pellets, food products, rubber compounds or chemical formulations, extruders deliver consistency, throughput and tight process control. With more than 47 years of expertise, IPP offers secondhand and surplus extruders from 20 complete plant sites and over 15,000 ready-to-ship process systems.

IPP stocks single-screw and twin-screw extruders from trusted manufacturers like Coperion, Baker Perkins, Werner & Pfleiderer and Davis-Standard, covering a wide range of materials and formulations.

Primary uses across industries

  1. In plastics and polymer processing, for pelletizing, compounding, and profile extrusion
  2. In food production, for forming pasta, snacks, cereals and plant-based protein products
  3. In rubber and elastomers, for mixing and shaping seals, hoses and automotive components
  4. In chemical and pharmaceutical manufacturing, for continuous mixing, shaping and granulating

Types of materials processed

  • Thermoplastics, elastomers, resins and waxes
  • Food doughs, starches, proteins and emulsions
  • Reactive or high-viscosity chemical blends

Common materials of construction

Extruders are engineered to withstand high pressures, temperatures and corrosive additives:

  • Carbon steel for general-purpose applications
  • Stainless steel for food-grade and corrosive chemical processing
  • Wear-resistant alloys for abrasive fillers or high-shear applications

Key features of industrial extruders

  • Single-screw and twin-screw options for flexibility and throughput
  • Modular barrels and screws for process customization
  • Precise temperature and pressure controls
  • Vacuum degassing and side-feed options available
  • Integrated pelletizing, cutting and downstream cooling systems

Learn more about extrusion in polymer and process industries from PlasticsToday.

Find your extruder at IPP

Search the IPP inventory or contact IPP’s equipment specialists to locate the right used, secondhand or surplus extruder for your line. Whether you’re compounding polymers or shaping food products, IPP helps you save time and money with equipment ready to go.

FAQ

Extruder FAQ

Have questions about Extruders or our services? Learn more about our products and why customers choose IPP.

What’s the difference between single-screw and twin-screw extruders?
Single-screw extruders are ideal for simple melting and shaping, while twin-screw extruders offer more control for mixing, compounding and reactive processing.
Can used extruders be retrofitted for new materials?
Yes – many extruders are modular, allowing screw elements, barrels and dies to be swapped or upgraded for new formulations.
What industries use extruders most?
Extruders are widely used in plastics, food, pharmaceuticals, elastomers and specialty chemical production.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP delivers fast turnaround, cost-effective solutions and over 47 years of technical expertise in process manufacturing.