Flow Rate
Measure
Quote Cart
Used industrial pumps for sale: cost-effective solutions for fluid handling and processing
Highest-ranked available inventory for this selection.
Used industrial pumps for sale: cost-effective solutions for fluid handling and processing
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Enter a keyword to match this specification.
Showing 25 of 55 matching Reciprocating.
This Aquadyne 3300DST is a robust, mobile, Detroit Diesel-powered reciprocating pump built to deliver very high pressure (up to 10,000 psi) at 45 GPM. Its design makes it well-suited for clean-in-place (CIP) operations—such as high-pressure tank washing—where reliability and performance are critical. This system includes a tank pressure washing module for installation on manways to perform CIP operations.
3-step Membrane dosing/metering pump with vent screw on each pump head 1.4571 pulsation absorber 0,5 l, G 3/8’’, Element A: 1100 l/h @ max 10.5 bar Element B and C: 550 l/h @ 4.2 bar
1.5 m3/hour at 150 bar 24-64 lift/minute,
2000 to 5000 cubic meter per hour triple head diaphragm pump working pressure 80 bar, max permissible working pressure 100 bar @ -196 degrees C driven by a 2-speed motor 52kw, 3/60/440/480 volt, 1770 rpm motor via a Lenze type 12.602.32.15 (5) 321 stainless steel valves,
(5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 rated 233 HP, 1460 /116 rpm Motor: 345 A CE stamped Includes shell and tube cooler, and lubricating pump
Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 rated 233 HP, 1460 /116 rpm Motor: 345A CE stamped Includes shell and tube cooler, and lubricating pump
316 stainless steel Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 3~/50Hz/500V/345A/1488rpm motor, Includes shell and tube cooler, and lubricating pump
Peroni piston pump (5) 80mm diameter pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 serial#:37406 rated 233 HP, 1460 /116 rpm Motor: 345A Includes shell and tube cooler, and lubricating pump
Peroni piston pump (5) 80mm diameter horizontal pistons 160 mm stroke direct coupled to a Pomini - Farrel S.p.A parallel shaft gear reducer type D800 3~/50Hz/500V/345A/1488rpm motor Includes shell and tube cooler and lubricating pump
3-step Membrane dosing/metering pump vent screw on each pump head Capacity: 0.5 ltr Connection: G 3/8’’ Element A: 1100 l/h @ max 10.5 bar Element B and C: 550 l/h @ 4.2 bar.
single dosing pump motor : type 1MA3106, ExeG3.
double Titan membrane pump head only no motor.
1.5 m3/hour at 150 bar 24-64 lift/minute 3/50/380/660 volt,
rod force 6kN, stroke length 20mm second pump (unit B):79.2 l/h, type EL3, serial number 307889-010.001, rod force 7.5kN, stroke length 20mm, stroke frequency 141rpm; third pump (unit C): 77.1 l/h, type EL3, serial number 307889-010.001, rod force 7.5kN, stroke length 20mm, stroke frequency 141rpm 3~/50Hz/230-400V/1,410rpm type 1MA5106-4BA41-Z ; EExeIIT3
triple head diaphragm pump working pressure 80 bar, max permissable working pressure 100 bar @ -196 degrees C driven by a 2-speed motor 52kw, 3/60/440/480 volt, 1770 rpm motr via a Lenze type 12.602.32.15 (5) 321 stainless steel valves
2000 to 5000 cubic meter per hour triple head diaphragm pump working pressure 80 bar, max permissable working pressure 100 bar @ -196 degrees C driven by a 2-speed motor 52kw, 3/60/440/480 volt, 1770 rpm motr via a Lenze type 12.602.32.15 (5) 321 stainless steel valves,
81 strokes per minute no motor gearbox ratio - 22.4:1 ratio
81 strokes per minute no motor 22.4:1 ratio
piston metering/dosing pump one pump head isolation class IP54 openings: (2) DN40
working capacity 8000 Liter/hour@320 bar With (3) 1.4571 stainless steel pump heads stroke length 160 mm maximum and Piston rod thrust 110,000 N ex proof. motor opennings suction (3) 50 mm, discharge (3) 50 mm
working capacity 8000 Liter/hour@320 bar With (3) 1.4571 stainless steel pump heads stroke length 160 mm maximum and Piston rod thrust 110,000 N ex proof. motor opennings suction (3) 50 mm, discharge (3) 50 mm
0,25 - 45 m³/h liquids injection pump type 22/1 for Hydrogen
Air Operated Double Diaphragm pump without motor.
Used industrial pumps from IPP encompass a wide range of machinery essential for fluid handling and processing across various industries. Whether you require centrifugal, positive displacement, or vacuum pumps, IPP offers equipment that meets your specific needs. With over 47 years of industry experience, IPP supplies used, surplus, and secondhand pump equipment from 20 global plant sites and maintains a ready-to-ship inventory of 15,000+ process systems.
IPP stocks equipment from leading manufacturers such as Goulds, Flowserve, Alfa Laval, and Waukesha, ensuring quality and reliability.
To ensure durability and compliance, pump equipment is typically constructed from:
Discover how used industrial pumps can enhance your processing efficiency at Machinery & Equipment Co.
Have questions about Pumps or our services? Learn more about our products and why customers choose IPP.
