Flow Rate
Measure
Quote Cart
Used industrial pumps for sale: cost-effective solutions for fluid handling and processing
Highest-ranked available inventory for this selection.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Enter a keyword to match this specification.
Showing 25 of 511 matching Centrifugal.
diesel centrifugal firewater pump system system consists of:(1) skid mounted 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" CMBB, serial #690603/1, 2000 rpm, packed gland on shaft, driven by a Leyland diesel engine, unit # CPU-3836, type PU401/21/3, engine # 911288, type UE401/113/3, tappet clearance 020" cold, injection 26 deg before top dead center, firing order 153624, exhaust with a silencer,(1) electric driven back up pump, 625 GPM (2837 ltr/min) @ 230 ft head Mather & Platt c/steel centrifugal pump, size 5"/6" E-NE-B, serial # 690602/1, 3000 rpm, packed gland on shaft, direct driven by 60 hp, 3/50/380/420 volt, 2940 rpm motor,(1) Jockey pump with gauges and valves(1) control panel
3/50/400/690 volt,
25 Ra electropolished internal finish with a silicon carbide double mechanical seal. Viton is the elastomer material.
8" x 6" impellor. Vert split, end suction, top discharge. No motor. takes 900 HP, 3600 rpm motor. 4000 Volts.
Exp zone 1 high pressure magnetic pump Motor: electrical openings (2) DN15, (1) DN25, (1) DN40
8922/7656 GPM 1091/914 ft./hd Tandem mounted centrifugal pumps Two pumps with an intermediate automatic clutch driven between the pumps Single shaft end designed to be driven by a Terry Steam Turbine Item # 02B-P-2A Clutch is manufactured by Marland, Model Cecon, size CEUS-4M. serial # 73025 B. Takes 14 quarts auto transmission fluid. Rated for 1823 HP. Free end pump is a size 12 x 13. Type HT-HVC. Rated for 7656 GPM at 914 ft./hd., RPM=3750. Hydro tested to 1200 psi. Serial # 48685, Item # 02B-HT-2. Both pumps have mechanical seals and forced oil lubrication. Seal flush water requirement is 1.5 GPM(3 GPM both pumps) of clean cool liquid 50 psi over suction pressure. Cooling water required at 2 gpm of 95 degree F. Max. at 75 psi (max). Both pumps and clutch are base mounted.
seal-less magnetic drive Motor: AC 230/460 V Class I Div. I Groups C & D
seal-less magnetic drive CE Rated for Europe motor model 01036XT3E215TC
seal/less magnetic drive Motor: AC
6 m³/hr (74.5m head) - 14 m³/h (40m head) 3kW @ 2900 rpm type LM100RB14/330 IP 55, CE confirm motor including Hydrovar electrical control panel, type HV 3.3 f/120c openings: (2) DN50
184 ft./hd, split case centrifugal pump. Size 8 x 8 x 17 Type 8100, direct driven.
160-200m³/h 100mm top and 125mm end openings
5.6 lb/hour
3340 BHP
Suction pressure 273 psi
Differential pressure is 429 psi. Rated for the following: Temperature 111 degrees F., Specific Gravity 0.992,
Has heat exchangers and pump for cooling oil to the bearings on its shaft. .
No motor.
multistage horizontal split case pump size 4 x 110 A6 MAWP Side suction and discharge Motor: AC Motor rated for Class 1, Division 2, Group D
Plan 52 dual seal unpressurized AC motor
cast steel (GGG40.3) centrifugal pump openings: (1) DN50 and (1) DN80 EMGV-200LG-02A,
40m conveying height with carbon steel housing and stainless steel bucket wheel openings: (1) DN125, (1) DN150 no motor
wetted end direct driven Motor ID #: 6753220-2 Motor model #: P28G398H G7 XQ Motor amperage: 34.1 Motor weight 385 lbs
53m conveying height, centrifugal pump only (no motor), double mechanical seal, type: Crane 109/109, with a 1.4435 stainless steel lubricator, manufactured by Aerni AG, type AR-139-1.4435, serial number 5220-44, pressure rated by -1/10bar @ 100 degrees C, openings pump: (1) DN50 and (1) DN65.
double mechanical seal type Crane T-109/T109 with lubricator Motor type: MQUF160L6, ExeG3 openings: (2) DN150
1660 TDH Duplex Stainless Steel (A743- 13cr4ni) 7 Stage NEMA Nom Efficiency rated for 95.8% Set up for long term storage both in the vertical position
splitcase firewater pump. Has outboard bearings str head 6-cylinder diesel engine S No. 38811, CPL - 028, Date 1 - 73.
Used industrial pumps from IPP encompass a wide range of machinery essential for fluid handling and processing across various industries. Whether you require centrifugal, positive displacement, or vacuum pumps, IPP offers equipment that meets your specific needs. With over 47 years of industry experience, IPP supplies used, surplus, and secondhand pump equipment from 20 global plant sites and maintains a ready-to-ship inventory of 15,000+ process systems.
IPP stocks equipment from leading manufacturers such as Goulds, Flowserve, Alfa Laval, and Waukesha, ensuring quality and reliability.
To ensure durability and compliance, pump equipment is typically constructed from:
Discover how used industrial pumps can enhance your processing efficiency at Machinery & Equipment Co.
Have questions about Pumps or our services? Learn more about our products and why customers choose IPP.
