Used compressors for sale: air and gas compression systems for industrial utilities
Highest-ranked available inventory for this selection.
Used compressors for sale: air and gas compression systems for industrial utilities
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Showing 25 of 38 matching Reciprocating.
C 3-stage reciprocating Boil-off-gas (BOG) compressor system maximum allowed rod. Load 100kN, rated discharge pressure of final stage 69 barg, suction pressure 1st stage 0.05 bar @ 30 degrees C, 2nd stage 4.6 bar @ 45 degrees C, 3rd stage 27.7 bar @ 45 degrees C, discharge pressure 1st stage 4.7 bar @ 176 degrees C, 2nd stage 27.9 bar @ 190 degrees C, 3rd stage 69 bar @ 160 degrees C, driven by a 250kw, 3/50/400 volt, 594 rpm ATEX 1022 EExd II B T4Loher motor, (1) 550 liter stainless steel vertical pulsation dampner vessel, manufactured by Nadoba Stabilini, serial #954, pressure 0.05 bar @ -118/+30 degrees C, 610mm diameter x 1740mm straight side, weld dished top and bottom, (1) 125 liter carbon steel horizontal pulsation dampner, manufactured by Tlakova Nadoba Stabilini, serial #955, pressure 10.7/69.6 bar @ 57/159 degrees C, weld dished ends, (1) carbon steel tube and shell horizontal 1st stage intercooler, manufactured by APL Apparatebau AG, serial #W8227/EC22601, tubeside pressure 10 barg @ -10/200 degrees C (27 liter), shell 10 barg @ -10/200 degrees C (53 liter), (1) carbon steel tube and shell horizontal 2nd stage intercooler, manufactured by APL Apparatebau AG, serial #W8228/EC22602, tubeside pressure 29 barg @ -10/200 degrees C (20 liter), shell 10 barg @ -10/200 degrees C (55 liter), (1) carbon steel tube and shell horizontal 3rd stage intercooler, manufactured by APL Apparatebau AG, serial #W8229/EC22603, tubeside pressure 78 barg @ -10/200 degrees C (9 liter), shell 10 barg @ -10/200 degrees C (42 liter), system also includes interconnecting pipework, valves, etc, ALL CE MARKED
pressure compressor cooling medium R717 Motor current: 144A
Flow rate: 910 Nm3/hr 100/165 deg C Hydrogen 3-stage V-type compressor system aspiration flow 1010 m3/hr suction pressure stage 1 = 1/1.1 bar @ 20-40 deg C, stage 2 = 3.6 bar @ 140 deg C, stage 3 = 10.76 bar @ 40 deg C, pressure side stage 1 = 3.8 bar @ 165 deg C, stage 2 = 10.8 bar @ 160 deg C, stage 3 = 17 bar @ 100 deg C, ambient temperature -20/+10 deg C, water cooled compressor, performance 134kw 1500 rpm motor (missing) system also includes heat exchanger (gas cooler), pulsation dampers, separators, pipework, pressure gauges etc
cooling medium R717
no ex proof System included (2) separator tanks (1) separate 4 cm³/U oil pump, type KF1/4 D10K POA ODD1 with 0.56 kW, 220-380, 50 Hz, 1.380 rpm electrical motor (1) separate control panel
two stage compressor SO # 60.5-7315
low pressure hydrogen compressor, vertical,two stage. V-belts Hydrogen humidity 100% compressor, capacity 65 kW, suction pressure, 1 stage 1.05 bar,30 C; 2nd stage 3,0 bar/34 C; discharge pressure abs 1 st stage 3.2 bar/145 C; 2nd stage 7.1 bar/122 C. 1st stage cylinder dia 370mm; 2nd stage 220mm. Cylinder material Ni-resist. Safety valve on 1st stage react at 3.5 bar; on 2nd stage 7.5 bar. Cooling water 5 cbm inlet temp 24 C@3 bar.
650 Nm3/hr Hydrogen single stage compressor system mass flow 62.2 kg/hr, suction pressure 16 bar @ 35 – 40 deg C, ambient temperature -20/+40 deg C, water cooled compressor performance 41kw, single stage, 85mm stroke, speed 780 rpm, average piston speed 2.21 m/sec, V-belt driven by 51kw, system also includes (1) horizontal heat exchanger (gas cooler), (2) pulsation dampers (1 for suction, 1 for discharge), pipework, pressure gauges etc
driven by 220/253kW, 3/50-60/400/440-460 volt, 1463/1750-1759 rpm motor, with model DE235 HP refrigerant air dryer, manufactured by M.T.A,spa, serial #2200077950, 3/50/400 volt, IP22, R134a refrigerant, pressure 22.6 bar LP side, 26 bar HP side,
driven by 220/253kW, 3/50-60/400-690/460 volt, 1480/1776 rpm motor, built on controls, (1) model DE235 HP refrigerant air dryer, manufactured by M.T.A. spa, serial #2200079613, 3/50/400 volt, IP22, R134a refrigerant, pressure 22.6 bar LP side, 26 bar HP side,
hydrogen reciprocating compressor
dry hydrogen reciprocating compressor, suction pressure 17 kg/cm2, discharge pressure 35-66 kg/cm2, speed 257 rpm, 400 rpm,
dry hydrogen reciprocating compressor. discharge pressure 35-66 kg/cm2 speed 257 rpm, 400 rpm
Gas compressor. Rated suction pressure 0.30 amps.. Rotation Drive end CCW
dry hydrogen reciprocating compressor. suction pressure 6.5 - 9 Kg/sq cm discharge pressure 23 - 35.4 Kg/sq cm
compressor cylinder.
absorbed power 295kw the compressor can be used onthe following gases H2, CH4, C2H5, C3H8, C1H10, C5H12, H2O
absorbed power 295kw used onthe following gases H2, CH4, C2H5, C3H8, C1H10, C5H12, H2O,
DK compressor
Reciprocating air compressor fully enclosed in soundproof cabinet
2-stage reciprocating gas compressor system stage 1 with 5.25” bore, 9” stroke, normal discharge pressure 562 psig, rated discharge pressure 1500 psig, max working pressure 1650 psig, max discharge gas temperature 350 deg F (177 deg C), max cooling water pressure 75 psig, stage 2 with 4” bore, 9” stroke, normal discharge pressure 887.5 psig, rated discharge pressure 3300psig, max working pressure 3650 psig, max discharge gas temperature350 deg F (177 deg C), max cooling water pressure 75 psig, (1)1st stage discharge dampner, 80ltr carbon steel horizontal pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 45 barg @ 200 deg C, weld dished ends (1) 1st stage suction dampner, 80ltr carbon steel horizontal pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 24 barg @ 200 deg C, weld dished ends (1) 1st stage intercooler, 4.4 sqm carbon steel horizontal ‘U’ tube heat exchanger, manufactured by Bronswerk Heat Transfer, job #30264, type 15-BEU-34, design pressure tubeside 120 barg @ 200 deg C, shell side 10 barg @ 60 deg C, (13) 15.8mm diameter x 2.32 x 3.4m long ‘U’ tubes, bolt flat head (1) 2nd stage discharge dampner, 50ltr carbon steel horizontal pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 71 barg @ 200 deg C, weld dished ends (1) 2nd stage suction dampner, 80ltr carbon steel horizontal pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 45 barg @ 200 deg C, weld dished ends (1) 2nd stage after cooler, 4.4 sqm carbon steel horizontal ‘U’ tube heat exchanger, manufactured by Bronswerk Heat Transfer, job #30267, type 15-BEU-34, design pressure tubeside 288 barg @ 200 deg C, shell side 10 barg @ 60 deg C, (13) 15.8mm diameter x 2.32 x 3.4m long ‘U’ tubes, bolt flat head (1) line separator, 37ltr carbon steel vertical pressure tank, manufactured by Peerless Europe ltd, job #93/1127/11, design pressure 45 barg @ 200 deg C, weld dished top and bottom (1)liquid collection pot, 13ltr carbon steel vertical pressure tank, manufactured by Dresser-Rand, job #84890, design pressure 71 barg @ 200 deg C, weld dished top and bottom (1) 2nd stage separator, (stand alone), 240ltr c/steel vertical pressure tank, manufactured by Paul & Loughran ltd, design pressure 300 barg @ 150 deg C
@ 19/25 bar compressor
high pressure hydrogen compressor vertical, two stage, type BV 35-145/65 Rated capacity 80 cbm/hr,300 rpm, stroke 85 mm, drive 11,8 kW. V belt driven by 15 kw, 50 hz, 1460 rpm. Hydrogen humidity 100%. Suction 1st stage 6 bar/30 C, suction 2nd stage 22.2 bar/34 C, discharge 1st stage 22.4 bar/148C, discharge 2nd stage 40 bar/75 C, 1st stage cylinder dia 145mm, 2nd stage 65mm, cylinder mat GGz 25,safety valve on 1st stage reacts at 21.5 bar,on 2nd at 43 bar,cooling water 0.3 cbm/hrinlet 10C,outlet 22c@3 bar
Metallic diaphragm reciprocating air compressor Belt driven actual discharge temperature 130 degres C, actual discharge pressure 0.32 to 139 bar. Openings: 4-1"; water 2-1"
177 lbs/day oxygen gas compressor Size 26x26x25x16.5x12
When your operation depends on reliable gas compression for process, storage, or transfer, industrial compressors deliver the performance needed to keep operations moving. With over 47 years of process equipment expertise, IPP provides immediate access to high-quality used compressors sourced from 20 complete plant sites and included in our inventory of over 15,000 ready-to-ship pieces of equipment. Choosing used compressors from IPP helps companies reduce capital costs, shorten procurement timelines, and maintain consistent system reliability.
Industrial compressors are designed to increase the pressure of gases for transportation, storage, or process operations. They are essential for applications across chemical manufacturing, energy production, food and beverage processing, and general industrial services.
Compressors are designed for durability, chemical compatibility, and safe operation under pressure:
Learn more about industrial compressor selection and optimization from Plant Engineering.
Search the IPP inventory or contact IPP’s equipment experts to find a used compressor that fits your plant’s needs. With ready-to-ship inventory, IPP helps companies increase uptime, lower costs, and maintain reliable gas handling operations.
Have questions about Compressors or our services? Learn more about our products and why customers choose IPP.
