Quote
Quote Cart
clear all items
All Equipment Compressors Centrifugal

Compressor Inventory - Search Centrifugal Compressors | IPP

Used compressors for sale: air and gas compression systems for industrial utilities

Request a Quote
Equipment Systems Plants
Searching equipment…
Active Filters
Equipment
Compressor
Subtype: Centrifugal
Clear all filters
Featured

Top Centrifugal in stock

Highest-ranked available inventory for this selection.

Browse

Compare related Compressor types

Subtypes
All Compressors Centrifugal Reciprocating Rotary
Refine Results

Refine Centrifugal

Specifications
Results 37 items found

Available Centrifugal

Showing 25 of 37 matching Centrifugal.

Featured
Stock Number: #246809
Centrifugal Compressor by Ingersoll Rand IRN100H-22
Compressor Type: Centrifugal
Inlet Pressure: 14 psi
Discharge Pressure: 145 psi
Flow Rate: 400 CFM
More Details ⟶
Featured
Stock Number: #212987
Centrifugal Wet Gas Compressor Unused, Dresser-Rand Model D18R6B
Compressor Type: Centrifugal
Inlet Pressure: 20.9 psi
Discharge Pressure: 193.7 psi
Flow Rate: 24,200 CFM
Speed (RPM): 5,653
Additional Information: Wet Gas Compressor Radial Split case two stage compressor motor through a Lufin gear reducer The Datum compressor is an 18 frame size(inside case diameter) with a radial split case, six impellers and a back to back rotor design. The machine features a lube skid that supports the compressor, motor and gear, a gas skid for the double Dry Gas seals, and instrumentation for vibration and temperature detection. MMSCFD Dry: 49.73; Lbs/Hr Wet: 224,820; Inlet PSIA: 20.9; Inlet Temp: 106 Degree F; Inlet ACFM Wet: 24,183 Designed for Outdoor Use, Under roof.
All Electricals are Class 1, Group CD, Division 2. Speeds: Maximum Continuous 5,653 RPM, Trip Speed 5,719, CCW rotation from drive end. With one piece shaft. Motor, Gear reducer, and Compressor skid mounted.
Lufkin Gear reducer, 3.178:1 ratio, rated 10,300 HP. The Oil control system is by Cobey, and skid mounted. The Seal gas system and skid are by Flowserve.
More Details ⟶
Stock Number: #246810
Carbon Steel Ingersoll Rand SSR-EP100 Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 14 psi
Discharge Pressure: 128 psi
Flow Rate: 434 CFM
More Details ⟶
Stock Number: #217916
Unused Carbon Steel Centrifugal Compressor
Compressor Type: Centrifugal
Additional Information: Air end compressor head Part # 1616 6551 GA55 GBD- part # 2901-0844-00.
More Details ⟶
Stock Number: #212639
4,600 m3/h (2,700 CFM) Carbon Steel Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 14.1 psi
Discharge Pressure: 110 psi
Flow Rate: 2,700 CFM
Inlet Diameter: 6 in
Speed (RPM): 3,575
Additional Information: Centac II air compressor Water cooled with both Intercooler & after cooler Compressor inlet 6" discharge 3" cooling water inlets and outlests are 2" Skid mounted with control panel and oil pump 2 pole 3 phase constant speed AC drive motor rated for 129 full load amps With carbon steel air reciever 600 gallon vertical mount 6" inlets and outlets, 1.5" presure releif valve, and 15" eliptical hand way.
More Details ⟶
Stock Number: #211266
850 m3/h (500 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Discharge Pressure: 65 psi
Flow Rate: 500 CFM
Additional Information: Turbine and Compressor package Turbine Model CYRPE Serial number 202213 Compressed air discharge pressure is 60 to 65 psi Turbine steam pressure discharge 106 to 125 psi. Packaged design with inter and after cooler, and lube oil package. Digital controls and digital governor. Includes motor starter and switch gear.
More Details ⟶
Stock Number: #207569
3,650 m3/h (2,150 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Discharge Pressure: 18 psi
Flow Rate: 2,150 CFM
Speed (RPM): 3,600
Additional Information: Centac Air Compressor
More Details ⟶
Stock Number: #247406
Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 14 psi
Discharge Pressure: 125 psi
Flow Rate: 958 CFM
Oil Free: Yes
Additional Information: • Variable speed motor based on load.
More Details ⟶
Stock Number: #92812
2,150 m3/h (1,250 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 15 psi
Flow Rate: 1,250 CFM
Speed (RPM): 22,831
Additional Information: 11,754 'TDH Sundyne centrifugal compressor Direct driven through a Sundyne gearbox by a Louis Alis Pacemaker AC motor
More Details ⟶
Stock Number: #94664
45,950 m3/h (27,050 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 21.8 psi
Discharge Pressure: 257.7 psi
Flow Rate: 27,050 CFM
Speed (RPM): 5,376
Additional Information: centrifugal propylene refrigeration compressor. 1st section: inlet conditions, capacity 344,787 lbs/hr, pressure 21.8 psia, temp -35 deg F, compressability .949, flow rate at suction cond 27036 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 41.9 psia, 25.8 deg F temp, compressability 0.934. Section 2: inlet conditions, capacity 547505 lbs/hr, pressure 41.9 psia, temp 15.2 deg F, compressability 0.932, flow rate at suction condition 24603 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 127.8 psia, temp 119.9 deg F, compressability .895. Section 3: inlet conditions, capacity 53660 lbs/hr, pressure 127.8 psia, temp 119.9 deg F, compressability 0.895, flow rate at suction condition 8474 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 257.7 psia, temp 187.4 deg F, compressability 0.841. Rpm 5376, duty BHP 13809, driver BHP 13678, design pressure 300 psig, design temp 350 deg F. (Compressor only). Rebuilt 1993.
More Details ⟶
Stock Number: #103848
Unused 15,800 m3/h (9,300 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 21.6 bar
Discharge Pressure: 23.1 bar
Flow Rate: 9,300 CFM
Speed (RPM): 2,986
Additional Information: centrifugal gas compressor. Weight flow 348,900 Kg/hr. Required power 865 KW All parts and accessories available including lube oil skid, Seal oil overhead tank, DeGassing tank, seal oil collecting tank, heat exchanger and Arlon filters.
More Details ⟶
Stock Number: #207566
3,650 m3/h (2,150 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 14.5 psi
Discharge Pressure: 18 psi
Flow Rate: 2,150 CFM
Speed (RPM): 3,600
Additional Information: Centac Air Compressor Direct coupled to motor Intake pressure;14.5 Intake temp. 95 degrees F at 60% relative humidity rated speed 1800 rpm, barometer 14.4 psia.
More Details ⟶
Stock Number: #207567
3,650 m3/h (2,150 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 14.5 psi
Discharge Pressure: 18 psi
Flow Rate: 2,150 CFM
Speed (RPM): 3,600
Additional Information: Centac Air Compressor at 60% relative humidity rated speed 1800 rpm barometer 14.4 psia
More Details ⟶
Stock Number: #222927
Cooper Bessemer RFB-24 Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 811 psi
Discharge Pressure: 856 psi
Flow Rate: 12,500 CFM
Speed (RPM): 6,070
Additional Information: with Turbodyne steam turbine driver Maximum pressure 1000 PSI @ 145 degrees F Maximum continuous RPM is 6070 Rated 4852 HP, 5780 RPM Previously used as a Methanol Recycle compressor The compressor is driven by a Turbodyne steam turbine Motor: Order #U-19182 Inlet 600 PSIG @ 750 Degrees F; Exhaust pressure 55 PSIG @ 373 degrees F. Maximum continuous speed 5650 RPM. Frame S5, 2nd critical rpm 11,500. Includes a spare rotor. (NOTE: Turbine can be sold separately -See IPP # 222928 for turbine only).
More Details ⟶
Stock Number: #94655
72,050 m3/h (42,400 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 15.7 psi
Discharge Pressure: 95 psi
Flow Rate: 42,400 CFM
Speed (RPM): 4,230
Additional Information: centrifugal cracked gas hydrocarbon 2 section compressor 1st section: inlet conditions, capacity 193,400 lbs/hr, pressure 15.7 psia, CP/CV 1.178, temp 99 deg F, compressability .9945, flow rate at suction condition 42400 cu ft/min, molecular weight 28.88 Discharge conditions, pressure 42.5 psia, 220 deg F temp, compressability .9926, compression ratio 2.675. Section 2: inlet conditions, capacity 176,300 lbs/hr, CP/CV 1.183, pressure 36.3, temp 95 deg F, compressability 0.9885, flow rate at suction condition 17460 cu ft/min, molecular weight 27.73. Discharge conditions, pressure 95 psig, temp 212 deg F. Speed 4230, duty BHP 8110, driver BHP 9130, design pressure 125 psig, design temp 350 deg F. (Compressor only).
More Details ⟶
Stock Number: #225215
Ingersoll Rand Centac C140-MX3-2SH Centrifugal Compressor
Inlet Pressure: 0.98 bar
Discharge Pressure: 10.4 bar
Flow Rate: 4,250 CFM
Oil Free: Yes
Additional Information: high pressure, unitized and skid mountedmultistage air compressor systemoil free designhigh air temperature to trip setting (interstage) 46 degrees Cdesign cooling water temperature 25 degrees Ccooling water temperature rise design 14 degrees Ccooling water flow to oil cooler 180 ltr/min
More Details ⟶
Stock Number: #225214
Ingersoll Rand Centac C140-MX3-2SH Centrifugal Compressor
Discharge Pressure: 10.4 bar
Flow Rate: 7,200 m3/h
Additional Information: high pressure, unitized and skid mountedmultistage air compressor systemoil free designdesign cooling water temperature 25 degrees Ccooling water temperature rise design 14 degrees Ccooling water flow to oil cooler 180 ltr/min
More Details ⟶
Stock Number: #208890
2,100 m3/h (1,250 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 14.1 psi
Discharge Pressure: 125 psi
Flow Rate: 1,250 CFM
Inlet Diameter: 10 in
Speed (RPM): 3,575
Additional Information: Ingersol Rand Centac Air compressor Centrifugal compressor 3/60/230/480 volt Serial # 157414 With R P Adams air cooler, 10" diameter x 12' long, 66 sq.ft surface area
More Details ⟶
Stock Number: #94662
11,250 m3/h (6,600 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 102 psi
Discharge Pressure: 524 psi
Flow Rate: 6,600 CFM
Speed (RPM): 9,819
Additional Information: centrifugal cracked gas hydrocarbon 2-section compressor 1st section: inlet conditions, capacity 181,224 lbs/hr, pressure 102 psia, temp 95 deg F, compressability .968, flow rate at suction condition 6618 cfm, molecular weight 25.79. Discharge conditions, pressure 231.8 psia, 199 deg F temp, compressability .962. Section 2: inlet conditions, capacity 188118 lbs/hr, pressure 205 psia, temp 93 deg F, compressability .938, flow rate at suction condition 3378 cu ft/min, molecular weight 25.33. Discharge conditions, pressure 524 psia, temp 226 deg F, compressability .932. Speed 9819, duty BHP 7590, driver BHP 8360, design pressure 650 psig, design temp 350 deg F. (Compressor only).
More Details ⟶
Stock Number: #94670
5,600 m3/h (3,300 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 15.7 psi
Discharge Pressure: 305 psi
Flow Rate: 3,300 CFM
Inlet Diameter: 16 in
Speed (RPM): 10,780
Additional Information: centrifugal ethylene refrigeration compressor inlet conditions, capacity 28930 lbs/hr molecular weight 28.02 Discharge conditions, pressure 81.3 psia, 65 deg F temp, compression ration 5.18. Section 2: inlet conditions capacity 80480 lbs/hr, pressure 81.3 psia, temp -28.4 deg F; discharge condition pressure 305 psig, temp 149 deg F, compression ration 3.75. Speed 10,780 rpm. Driver BHP 3272, duty BHP 2719, design pressure 400 psig, design temp 350 deg F. (Compressor only). Rebuilt 1993.
More Details ⟶
Stock Number: #94666
45,950 m3/h (27,050 CFM) Carbon Steel Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 21.8 psi
Discharge Pressure: 257.7 psi
Flow Rate: 27,050 CFM
Speed (RPM): 6,066
Additional Information: centrifugal propylene refrigeration compressor inlet conditions, capacity 344,787 lbs/hr compressability .949 molecular weight 42.18 Discharge conditions, pressure 41.9 psia, 25.8 deg F temp, compressability 0.934. Section 2: inlet conditions, capacity 547505 lbs/hr, pressure 41.9 psia, temp 15.2 deg F, compressability 0.932, flow rate at suction condition 24603 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 127.8 psia, temp 119.9 deg F, compressability .895. Section 3: inlet conditions, capacity 53660 lbs/hr, pressure 127.8 psia, temp 119.9 deg F, compressability 0.895, flow rate at suction condition 8474 cu ft/min, molecular weight 42.18. Discharge conditions, pressure 257.7 psia, temp 187.4 deg F, compressability 0.841. Rpm 5376, duty BHP 13809, driver BHP 13678, design pressure 300 psig, design temp 350 deg F. (Compressor only). Rebuilt 1993.
More Details ⟶
Stock Number: #94659
72,050 m3/h (42,400 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 15.7 psi
Discharge Pressure: 95 psi
Flow Rate: 42,400 CFM
Speed (RPM): 4,230
Additional Information: centrifugal cracked gas hydrocarbon 2-section compressor. 1st section: inlet conditions, capacity 193,400 lbs/hr, CP/CV 1.178, compressability .9945, flow rate at suction condition 42400 cu ft/min, molecular weight 28.88. Discharge conditions, pressure 42.5 psia, 220 deg F temp, compressability .9926, compression ratio 2.675. Section 2: inlet conditions, capacity 176,300 lbs/hr, CP/CV 1.183, pressure 36.3, temp 95 deg F, compressability 0.9885, flow rate at suction condition 17460 cu ft/min, molecular weight 27.73. Discharge conditions, pressure 95 psig, temp 212 deg F. Speed 4230, duty BHP 8110, driver BHP 9130, design pressure 125 psig, design temp 350 deg F. (Compressor only).
More Details ⟶
Stock Number: #216226
Carbon Steel Clark 4M7-4 Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 41.9 psi
Discharge Pressure: 155 psi
Flow Rate: 36,850 CFM
Speed (RPM): 5,739
Additional Information: • Centrifugal compressor C/T # 20967-AHP=14438Ratio; 3.68.Down Nozzle, set up for a turbine drive.
More Details ⟶
Stock Number: #210731
8,300 m3/h (4,900 CFM) Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 14.5 psi
Discharge Pressure: 120 psi
Flow Rate: 4,900 CFM
Additional Information: Elliot Centrifugal Compressor Style 2 B1 Frame
More Details ⟶
Stock Number: #212816
20,000 m3/h (11,750 CFM) Carbon Steel Centrifugal Compressor
Compressor Type: Centrifugal
Inlet Pressure: 29 psi
Discharge Pressure: 60 psi
Flow Rate: 11,750 CFM
Speed (RPM): 6,220
Additional Information: 11,763 ACFM with seven impellers inlet temperature is 24 degrees F. The average compressibility factor is 0.979. The nozzle orientation up The compressor rpm is 5,875 rpm, with a maximum speed of 6,220 rpm and a first critical speed of 3,000 rpm. Compressor HP is 1,574. Designed to be driven by a steam turbine (IPP# 212817) with a speed increaser (IPP # 212818).
More Details ⟶
Request a Quote

Discover used, secondhand and surplus compressors from IPP – oil-free, rotary and reciprocating models ready to ship

IPP’s ready-to-ship compressors deliver performance and help you save time and money on plant utilities

When your operation depends on reliable gas compression for process, storage, or transfer, industrial compressors deliver the performance needed to keep operations moving. With over 47 years of process equipment expertise, IPP provides immediate access to high-quality used compressors sourced from 20 complete plant sites and included in our inventory of over 15,000 ready-to-ship pieces of equipment. Choosing used compressors from IPP helps companies reduce capital costs, shorten procurement timelines, and maintain consistent system reliability.

Industrial compressors are designed to increase the pressure of gases for transportation, storage, or process operations. They are essential for applications across chemical manufacturing, energy production, food and beverage processing, and general industrial services.

Primary uses across industries

  • In chemical processing, compressors move feed gases through reactors and separation units.
  • In oil and gas, they transport natural gas, vapor recovery, and process gas management.
  • In food and beverage production, compressors provide air for packaging lines, fermentation, and pneumatic systems.
  • In pharmaceutical manufacturing, they supply clean compressed air for production and packaging.
  • In industrial utilities, compressors operate pneumatic tools, controls, and facility services.

Types of materials processed

  • Air for pneumatic systems and utilities
  • Process gases such as nitrogen, oxygen, hydrogen, and carbon dioxide
  • Hydrocarbon gases like methane, ethylene, and propane
  • Refrigerants for process cooling systems

Common materials of construction

Compressors are designed for durability, chemical compatibility, and safe operation under pressure:

  • Stainless steel for corrosive gas handling and sanitary applications
  • Carbon steel for general compressed air and inert gas services
  • Specialty alloys for high-pressure, high-temperature, or reactive gas environments

Key features of industrial compressors

  • Reciprocating, rotary screw, centrifugal, and diaphragm designs available
  • Oil-lubricated and oil-free models for different process needs
  • High-pressure and variable speed options for flexible operations
  • Skid-mounted systems for easy integration into existing facilities
  • Built-in safety and control systems to ensure operational reliability

Learn more about industrial compressor selection and optimization from Plant Engineering.

Find your industrial compressor at IPP

Search the IPP inventory or contact IPP’s equipment experts to find a used compressor that fits your plant’s needs. With ready-to-ship inventory, IPP helps companies increase uptime, lower costs, and maintain reliable gas handling operations.

FAQ

Compressor FAQ

Have questions about Compressors or our services? Learn more about our products and why customers choose IPP.

What industries rely most on industrial compressors?
Chemical, oil and gas, food and beverage, pharmaceutical, and general manufacturing industries all rely on compressors for essential process and utility functions.
How do rotary screw compressors compare to reciprocating compressors?
Rotary screw compressors are ideal for continuous duty and large volume needs, while reciprocating compressors are better suited for smaller volumes and higher-pressure applications.
What maintenance is required for industrial compressors?
Regular maintenance includes checking oil levels, inspecting seals and bearings, monitoring pressure settings, and replacing filters to ensure efficient and safe operation.
What are the benefits of buying used or secondhand process equipment from IPP?
Buying used from IPP can save up to 70% compared to new equipment, allow for faster project implementation, support sustainability, and leverage over 47 years of industry expertise.