Used compressors for sale: air and gas compression systems for industrial utilities
Highest-ranked available inventory for this selection.
Used compressors for sale: air and gas compression systems for industrial utilities
Select one or more values to narrow the current listings.
Set a numeric threshold to narrow the matching listings.
Showing 25 of 38 matching Rotary.
115 to 125 max. psi Rotary Screw Air Compressor Oil Free, packaged design, with microprocessor controls, cooler and lubricator
IP55 motor, water cooled, with integrated air dryer, mounted in an acoustic cabinet,
Ammonia Compressor C/T 20571. Inlet Casing Design Pressure 2500 PSIG, Outlet Casing Design Pressure 2500 PSIG; Outlet casing Design Temperature 450 Degrees F 1sr Critical speed 5300 RPM, Maximum Operating Temperature 380 Degrees F; Test Inlet Pressure 3750 PSIG; Test Discharge Pressure 3750 PSIG. NOTE: Used in train with turbines #206300 & 206301, and Compressor # 206303
Two stage, oil flooded, rotary, air compressor Single stage screw compressor, with all accessories piped, wired and base plate mounted in a packaged design with sound proof housing. Equipped with IR "Intellisys" digital controls, for operation of the entire system and allowing for modification of 12 variables in the controller logic. 3 inch NPT air discharge line, 2" NPT cooling water inlet and outlet ports, 0.5" NPT condensate drain line. Total package amps 310
rotary screw single stage air compressor With a 120 gallon receiver. with air cooling The compressor is belt driven The skid has analog controls.
rotary screw air compressor IR Intellisys controls 44' wide x 50" deep x 56" high.
Rotary screw compressor system oil flodded, variable speed drive, contained in soundproof cabinet, conpressor with: (1) ingersoll rand "thermal mass" TMS250 cycling refrigerated air dryer, SN: TMS250-0503/3863, max allowable pressure 16 bar, refigerant 5.8kg of R134A, electric's 3/50/380-420 volt, min ambient temperature 0-43 degrees c, max inlet temperature 55 degrees c, (2) ingersoll rand IRGP/IRHE 706 high efficiency pre-filters, (1) domnick hunter CP375 activated carbon tower filter (oil vapor removal > 0.003ppm)
rotary screw compressor system oil flooded, fixed speed design contained in soundproof cabinet, compressor with (1) ingersoll rand "thermal mass" TMS250 cycling refrigerated air dryer, SR # TMS250-503/3862, max allowable pressure 16 bar, refrigerant 5.8kg of R134A electric's 3/50/380-420 volt, min ambient temp 0/143 degrees c, max inlet temp 55 degrees c, (2) ingersoll rand IGRP/IRHE 706 high efficiency pre-filters, (1) domnick hunter CP375 activated carbon tower filter (oil vapor removal > 0.003ppm),
oil free air Compressor packaged design
Pulsair screw compressor system HPC Pulsair single rotary screw compressor air outlet temperature 9 degrees C, useable heat 77,378 Bthu/hr, expelled air temperature 23 degrees C, (1) 875 liter carbon steel air receiver, manufactured by Cool Technology ltd, design pressure 11 barg @ 100 degrees C, weld dished heads, (1) Ultrapac air dryer, type ALDO-0191, serial # 9288, 50/60 hz, 230 volt, working pressure 4 bar @ 4 degrees C (min), 16 bar @ 35 degrees C (max), ambient temperature 4 degrees C (min), 40 degrees C (max), pre-filter element MF-07/30, after filter element PE-07/30
180 acfm nitrogen compressor Rotary screw design, with inlet strainer with soundproof enclosure N2 outlet connection 2" NPT, Inlet strainer connection 2" NPT, drain, 3/4" NPT.
125 psi Takes 310 lbs. of R-22. Fan driven by a 0.1 HP motor. UL listed.
air cooled oil free rotary screw compressor This is a twin shaft screw compressor, positive displacement type 55 psia @ 60 degrees F outlet pressure The compressor is a type WQ 40-12/55, 1.2 kg/cu M, 20 degrees C, 75 cuM/minute 321 amps General Electric Energy Saver AC motor The intake flange is 8" and discharge flange is 6" and both are mounted at the top of the machine, and the instrumentation for monitoring the unit are mounted on the side as a panel. This unit is mounted in complete sound proof enclosure.
low pressure,Oil free air compressor, total running hrs 8133. power 20 KW 30/33,5 kW,3/50/60Hz/380V/2900/2950/3000/3540rpm
S20 Rotary Screw compressor max service pressure 8 bar Driven by 2-speed motor, 15 kw, 3/50/400/690 volt, 2910 rpm water cooled, enclosed in soundproof cabinet with air dryer and c/steel air reciever
air cooled rotary screw compressor oil free This is a twin shaft screw compressor This is a twin shaft 55 psia @ 60 degrees F outlet pressure The compressor is a type WQ 40-12/55, 1.2 kg/cu M, 20 degrees C, 75 cuM/minute General Electric Extra Severe Duty AC motor The intake flange is 8" and discharge flange is 6" and both are mounted at the top of the machine, and the instrumentation for monitoring the unit are mounted on the side as a panel. This unit is mounted in complete sound proof enclosure.
(1) 915 ltr c/steel air receiver, manufactured by Cool Technology ltd, design pressure 11 barg @ 100 deg C, weld dished heads, (1) Ultrapac air dryer, type ALDO-0191, serial # 9288, 50/60 hz, 220 volt, working pressure 4 bar @ 4 deg C (min), 16 bar @ 35 deg C (max), ambient temperature 4 deg C (min), 40 deg C (max), pre-filter element MF-07/30, after filter element PE-07/30
17.25 kw, 3/60/440/760 volt, 3500 rpm water cooled enclosed in soundproof cabinet, with air dryer and air reciever
Digital control system mounted on cabinet.
oil free air Compressor packaged design.
driven by 250kW, 3/50/690/400 volt, 1489 rpm IP55 motor, air cooled, integrated refrigerant air dryer, type ID 770W, serial #APF143965, 10.7kW, 3/50/380/415 volt, air pressure (max) 14.5 bar (e) @ 55 degrees C, refrigerant pressure 29/26 bar, all inside and acoustic cabinet, built on controls,
When your operation depends on reliable gas compression for process, storage, or transfer, industrial compressors deliver the performance needed to keep operations moving. With over 47 years of process equipment expertise, IPP provides immediate access to high-quality used compressors sourced from 20 complete plant sites and included in our inventory of over 15,000 ready-to-ship pieces of equipment. Choosing used compressors from IPP helps companies reduce capital costs, shorten procurement timelines, and maintain consistent system reliability.
Industrial compressors are designed to increase the pressure of gases for transportation, storage, or process operations. They are essential for applications across chemical manufacturing, energy production, food and beverage processing, and general industrial services.
Compressors are designed for durability, chemical compatibility, and safe operation under pressure:
Learn more about industrial compressor selection and optimization from Plant Engineering.
Search the IPP inventory or contact IPP’s equipment experts to find a used compressor that fits your plant’s needs. With ready-to-ship inventory, IPP helps companies increase uptime, lower costs, and maintain reliable gas handling operations.
Have questions about Compressors or our services? Learn more about our products and why customers choose IPP.
